This will be a bit more expensive, but --getctime does not need to be fast.
And getting the real creation time a very useful when untangling blog
histories that involve renames.
Benchmarking refresh of a a wiki with 25 thousand pages showed
file_pruned() using most of the time. But, when refreshing, ikiwiki already
knows about nearly all the files. So we can skip calling file_pruned() for
those it knows about. While tricky to do, this sped up a refresh (that
otherwise does no work) by 10-50%.
This makes it more efficient.
It also fixes the same bug that I fixed in orphans recently,
that only changes to the set of displayed pages were considered (or amoung),
which missed changes to links on other pages to those.
Probably this bug was never noticed because pagestats is most often put
on a blog type page, which gets updated anyway when posts change,
and thus the tag cloud was updated.
This makes it more efficient.
It also fixes a longstanding bug, where if only a small set of pages were
considered by orphans, changes to links on other pages failed to cause an
update.
Here I was bitten by perl's aliasing of foreach variables
to the loop array contents, and match_link accidentially changed
the contents of %links.
In Jon's testcase, a tag added an absolute link, which was
made relative by the above bug, and then the link was added
again in preprocess, and turned into a duplicate.
I had assumed that an image shown full size did not need add_depends, since
a change would not need a change to the displaying page.
But this is not true if the image is modified and its size changes. Then
the page needs to update its img tag to reflect the current size.
If an image was resized smaller, with width and height specified to values
that did not fit its aspect ratio, the image tag with/height were not
adjusted to the actual size imagemagick chooses.
This was broken by 03449610d6.
To fix it right, it unfortunatly needs to always read the src image now,
in order to determine if the image is being displayed larger, or resized
smaller. When resized smaller, it then always uses the size of the
thumbnail, while for larger it calculates the size.
(Only way to get rid of this sometimes extra image read would be to change
it to not allow displaying images larger.)
I weakended the regexp, so this matches ipv6 addresses too. It does not
ensure that the address is valid, but that should not matter here.
Note that addresses ending in "::" are not matched, so eg, the unspecified
address will not match -- but should never appear here anyway.
TeX has configuration options that prevent unsafe things like shell
escapes and insecure file reads/writes. Turn all of them on.
teximg's regex-based blacklist does not suffice. For instance:
[[!teximg code="""
\catcode`\%=0
%input{/etc/passwd}
"""]]
Remove the blacklist, since the TeX configuration options seal off the
underlying mechanisms more safely, and the blacklist blocks other TeX
commands that can prove useful.
Although imagemagick handles even really large sizes sanely, using a page
file, doing so would just waste time and disk space, since the browser
can be told to resize it larger.
During backlink calulation, all links are examined and broken links can
be detected for free, so store a list of broken links and have brokenlinks
use it.
Exposing the %brokenlinks structure is a bit ugly, but the speedup seems
worth it: Around 1 second for wikis the size of the doc wiki that use
brokenlinks.
By adding this setting, we get both more configurability, and a minor
optimisation too, since gettext does not need to be called continually
to get the Discussion value.
This was impressively broken. add_depends was being called with params
backwards, and on parameter was set to the name of the generated
file, which isn't in the source.
Now updates to images will update the page that contains them, thus
updating them. This is unncessary for fullsize images, so skipped.
openiduser previously used a constructor that no longer works in 2.x.
However, all we actually want is the (undocumented) DisplayOfURL function
that is invoked by the display method, so try to use that.
(cherry picked from commit c3dd0ff5c7c10743107f203a5b456fdcd1b171df)
Besides being wrong to do, this could lead to the wrong item
being expired, as follows: If B is added and at the same time
A is changed, then A's ctime may be set to the current time,
while B's is set to its creation time. Thus the new item, A,
is incorrectly removed as older.
(This interacted especially badly with the bug fixed by
90b4d079605b72bb50d1da41402d994960e10937.)
The aggregate state merge code neglected to merge changes to the md5
field of an item. Therefore, if an item's md5 changed after initial
aggregation, it would be updated, and rewritten, each time thereafter.
This was wasteful and indirectly led to some expire problems.
The test suite was emitting a lot of ugly gettext warnings;
setting LC_ALL didn't solve the problem for all locale setups
(since ikiwiki remaps it to LANG, and ikiwiki didn't know about
the C locale).
People also seem generally annoyed by the messages when
Locale::Gettext is not installed, and I suspect will be
generally happier if it just silently doesn't localize.
The optimisation came about when I noticed that the gettext
sub was doing rather a lot of work each call just to see
if localisation is needed. We can avoid that work by caching,
and the best thing to cache is a version of the gettext sub
that does exactly the right thing.
This was slightly complicated by the locale setting,
which might need to override the original locale (or lack
thereof) after gettext has been called. So it needs to invalidate
the cache in that case. It used to do it via a global variable,
which I am happy to have also gotten rid of.
Do not allow an unterminated """ string to be treated as a series of bare
words. Fixes runaway regexp recursion/backtracking in strange situations.
(See 1d57a21c98 for test case.)
Rationalle: Comments need to be user-editable so that they can be posted
via git commit etc.
The _comment directive is still supported, for back-compat.
format: Provide a htmlizefallback hook that other plugins can use to
handle formats that are not suitable for general-purpose htmlize hooks.
highlight: Use the hook to allow formatting of any language/extension,
without it needing to be enabled for standalone source files.
highlight: If the highlight perl binding is not available, fallback
safely to a passthrough mode.
And avoid a whole class of potential security problems (though
none that I know of actually existing..), by avoiding
performing any string interpolation on user-supplied data when translating
pagespecs.
This is sorta an optimisation, and sorta a bug fix. In one
test case I have available, it can speed a page build up from 3
minutes to 3 seconds.
The root of the problem is that $links{$page} contains arrays of
links, rather than hashes of links. And when a link is found,
it is just pushed onto the array, without checking for dups.
Now, the array is emptied before scanning a page, so there
should not be a lot of opportunity for lots of duplicate links
to pile up in it. But, in some cases, they can, and if there
are hundreds of duplicate links in the array, then scanning it
for matching links, as match_link and some other code does,
becomes much more expensive than it needs to be.
Perhaps the real right fix would be to change the data structure
to a hash. But, the list of links is never accessed like that,
you always want to iterate through it.
I also looked at deduping the list in saveindex, but that does
a lot of unnecessary work, and doesn't completly solve the problem.
So, finally, I decided to add an add_link function that handles deduping,
and make ikiwiki-transition remove the old dup links.
When finding the pageurl, it was calling bestlink unnecessarily.
Since at this point $page contains the full name of the page that
is being inlined, there is no need to do bestlink's scan
for it.
This is only a minor optimisation, since bestlink is only called
once per displayed, inlined page.
* pagespec_match_list: New API function, matches pages in a list
and throws an error if the pagespec is bad.
* inline, brokenlinks, calendar, linkmap, map, orphans, pagecount,
pagestate, postsparkline: Display a handy error message if the pagespec
is erronious.
* Add IkiWiki::ErrorReason objects, and modify pagespecs to return
them in cases where they fail to match due to a configuration or syntax
error.
* inline: Display a handy error message if the inline cannot display any
pages due to such an error.
This is perhaps somewhat incomplete, as other users of pagespecs do not
display the error, and will eventually need similar modifications to inline.
I should probably factor out a pagespec_match_all function and make it throw
ErrorReasons.
If the server has a clock running a bit ahead of the web browsing client,
relativedate could cause somewhat confusing displays like "3 seconds from now"
for just posted things.
As a hack, avoid displaying times in the future if they're less than a
small slip forward. I chose 30 minutes because both client and server could
be wrong in different directions, while it's still close enough that "just
now" is not horribly wrong.
This works around an enormous (and, in this context, enormously confusing)
message that git has begun to print when one attempts to push changes into
a non-bare repo.
As a bonus, it now tests whether ikiwiki-makerepo works.
Well, that was a PITA.
Luckily, this doesn't break guids to comments in rss feeds,
though it does change the links.
I haven't put in a warning about needing to rebuild to get
this fix. It's probably good enough for new comments to get the
fix, without a lot of mass rebuilding.
If an inlined page contains a floating element, this ensures
that the footer appears beneath it, and prevents the floating element from
possibly leaking down to the next inlined page.
It would be better to use urlto() here, but will_render
has not yet been called on the feed files at this point, so
it won't work. (And reorganizing so it can be is tricky.)
The problem was introduced by the recent noextension patches.
Object autovivification caused junk to get into %htmlize,
and all keys of that showed up as page types.
I guess what's happening here is that since the name
is passed to git via an environment variable, perl's normal
utf-8 IO layer stuff doesn't work. So we have to explicitly
decode the string from perl's internal representation into
utf-8.
This makes wikis such as zack's much faster in the scan pass.
In that pass, when a template contains an inline, there is no reason to
process the entire inline and all its pages. I'd forgotten to pass
along the flag to let preprocess() know it was in scan mode, leading to
much unncessary churning.
- In 3.05, ikiwiki began expanding templates in scan mode,
for annoying, expensive, but ultimatly necessary reasons
of correctness.
- Smiley processing has a bug: It inserts a span for the smiley,
and then continues searching forward in the content for more,
starting at $end_of_smiley+1. Which means it searches for smilies
in the span too! And if it somehow finds one, we get an infinite loop
here.
- This bug can, probably, only be tickled if a htmllink to
show the smiley fails, because the smiley file doesn't exist,
or because ikiwiki doesn't know about it. In that case,
a link will be inserted to _create_ the missing page,
and that link will include the smiley inside the <a></a>.
- When a template is expanded in scan mode, and it contains
an inline, the sanitize hook is run during scan mode,
which never happened before. That causes the smiley processor
to run, before ikiwiki is, necessarily, aware that all
the smiley files exist (depending on scan order). So
it inserts creation links for them, and triggers the bug.
I've put in the simple fix of jumping forward past the inserted
span, and it does fix the problem. I will need to look in a bit
more detail into why an inline nested inside a template is
fully expanded during the scan pass -- that really shouldn't
be necessary, and it makes things much slower than they need
to be.
This is potentially expensive, but is necessary so that meta and tag
directives, and other links on templates affect the page using the template
reliably.
It no longer makes sense to keep these functions in editpage, because
serveral plugins now exist that use them, and users may want to disable
editpage, while leaving those plugins enabled.
Most notably, comments uses both functions, and it's entirely appropriate
to disable editpage but still want to have comments enabled.
Less likely, attachments, rename, and remove all use check_canedit -- but
it would be unusual indeed to want to use these w/o editpage.
Falls back to looking for shortcuts.mdwn for backwards compatabiity; there
probably exist wikis that have changed the pageext but still use
shortcuts.mdwn.
This may already work with other web servers that have copied apache's
interface, and it should be easy to add support to it for web servers that
use some other interface. So, make the name more general.
That resulted in double encoded display when using perl's stub
readline module. Apparently that module unconditionally upgrades
text to utf8, in a quite braindead way.
(Term::ReadLine::Gnu::Perl worked ok.)
It will set up an ikiwiki instance tuned for use in blogging.
As part of this change, move the example sites into /usr/share/ikiwiki so
they are available even if docs are not installed.
Asking for only the head worked in my tests, but I've found a site where it
didn't -- apparently ikiwiki didn't get a chance to do or finish the
refresh when HEADed. Getting the whole url, waiting for ikiwiki to finish,
avoided the update problem.
* repolist: New plugin to support the rel=vcs-* microformat.
* goodstuff: Include repolist by default. (But it does nothing until
configured with the repository locations.)
It seems to be a failing of i18n in unix that the translation stops at the
commands and the parameters to them, and ikiwiki is no exception with its
currently untranslated directives. So the little bit that's translated sticks
out like a sore thumb. It also breaks building of wikis if a different locale
happens to be set.
I suppose the best thing to do is either give up on the localisation of this
part completly, or make it recognise English in addition to the locale. I've
tenatively chosen the latter.
(Also accept 1 and 0 as input.)
inline has a format hook that is an optimisation hack. Until this hook
runs, the inlined content is not present on the page. This can prevent
other format hooks, that process that content, from acting on inlined
content. In bug ##509710, we discovered this happened commonly for the
embed plugin, but it could in theory happen for many other plugins (color,
cutpaste, etc) that use format to fill in special html after sanitization.
The ordering was essentially random (hash key order). That's kinda a good
thing, because hooks should be independent of other hooks and able to run
in any order. But for things like inline, that just doesn't work.
To fix the immediate problem, let's make hooks able to be registered as
running "first". There was already the ability to make them run "last".
Now, this simple first/middle/last ordering is obviously not going to work
if a lot of things need to run first, or last, since then we'll be back to
being unable to specify ordering inside those sets. But before worrying about
that too much, and considering dependency ordering, etc, observe how few
plugins use last ordering: Exactly one needs it. And, so far, exactly one
needs first ordering. So for now, KISS.
Another implementation note: I could have sorted the plugins with
first/last/middle as the primary key, and plugin name secondary, to get a
guaranteed stable order. Instead, I chose to preserve hash order. Two
opposing things pulled me toward that decision:
1. Since has order is randomish, it will ensure that no accidental
ordering assumptions are made.
2. Assume for a minute that ordering matters a lot more than expected.
Drastically changing the order a particular configuration uses could
result in a lot of subtle bugs cropping up. (I hope this assumption is
false, partly due to #1, but can't rule it out.)
I see that this plugin's lists of safe content are already well out of
date, and htmlscrubber_skip offers a non whitelist based approach, so let's
deprecate this plugin for 3.0.
People seem to be able to expect to enter www.foo.com and get away with it.
The resulting my.wiki/www.foo.com link was not ideal.
To fix it, use URI::Heuristic to expand such things into a real url. It
even looks up hostnames in the DNS if necessary.
Joey Hess
Josh Triplett
Simon McVittie
Joey Hess
intrigeri