* Updating keymaps for Gingham and DMQ Design SPIN and adding keymap for BoardSource 4x12
* Update keyboards/boardsource/4x12/keymaps/codecoffeecode/keymap.c
* cleaning up
* got some working bones
* working pretty well
* really livin' now
* all done
* copyright adjustments
* default keymap
* readme
* no descrip
* remove trailing slashes
* remove blank line
* remove trailing slashes
* clean up readme
* clean up rules spacing
* bootloader spacing
* made quick json from KLE converter
* remove postageboard mini references
* add actual manu and product values
* add make example
* rework
* remove double bootload define
* smoller image
* liscensed
* correct dimensions
* dimensions
Specifically, don't want to have both RGBLight and RGB Matrix (with WS2812) enabled at the same time. This will cause issues in usage, but apparently not when compiling. Additionally, the led matrix was not encapsulated with preprocessor code.
* ext65rev2 initial
* open drain change and config
* pwm
* pwm streams
* spi
* ws2812 spi
* oled
* enable sleep
* keymap and dissable oled
* readd oleds
* nooled
* led_update_kb revised
* update and remove board specific files and add to ext65rev2.c
* Update OLED usb status
* Update keyboards led state
* Layer state set kb
* Return state
* Update keyboards led state
* Update OLED usb status
* merge master and merge rev folders
* add readme
* move board_init to only if OLED is enabled
* update readme
* update rules.mk
* Remove OLED from rules.mk
* Update config.h
* show AEBoards
* Update keyboards/aeboards/ext65/rev2/rules.mk
* added dumbo keyboard
* added my personal keymap
* changed picture in readme
* removed rev1 folder to reduce clutter and confusion
* missed a few changes in last commit, everything should be added now
* Apply suggestions from code review
Committed all of the suggested changes except for removing the bootloader reference comments in rules.mk as i think it is handy.
* Update keyboards/dumbo/rules.mk
Removed the bootloader reference as suggested
* Apply clean up of info.json
* Apply suggestions from noroadsleft to support community layout LAYOUT_SPLIT_3x6_4 in the future_4
* Added handwired/selene based on handwired/106_with_trackpoint
* now at least parially working
* Selene Firmware 1, ready
* Updated Readme to align more with Template
* Added URL to info.json
* Fix status Lights being wired incorrectly
* Update keyboards/handwired/selene/config.h
* Update keyboards/handwired/selene/keymaps/Bpendragon/keymap.c
* Update keyboards/handwired/selene/selene.c
* Update keyboards/handwired/selene/selene.h
* Changes for PR requested by fauxpark
* Adds `default` keymap
* Renames `Bpendragon` to `bpendragon`
* Removes uneeded descriptors and options
* Simplifies return statement in `keymap.c`
* Removes trailing slashes from layout in `keymap.c`
* Updates `readme.mk` to reflect default keymap
* Aligns comments in `rules.mk`
* Forced folder name update to lowercase
* Apply suggestions from code review
* On branch add_chavdai40_keyboard
Changes to be committed:
new file: keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.c
new file: keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.h
new file: keyboards/chavdai40/boards/GENERIC_STM32_F042X6/board.mk
new file: keyboards/chavdai40/bootloader_defs.h
new file: keyboards/chavdai40/chavdai40.c
new file: keyboards/chavdai40/chavdai40.h
new file: keyboards/chavdai40/chconf.h
new file: keyboards/chavdai40/config.h
new file: keyboards/chavdai40/halconf.h
new file: keyboards/chavdai40/info.json
new file: keyboards/chavdai40/keymaps/42keys-dvorak/config.h
new file: keyboards/chavdai40/keymaps/42keys-dvorak/keymap.c
new file: keyboards/chavdai40/keymaps/42keys-eucalyn/config.h
new file: keyboards/chavdai40/keymaps/42keys-eucalyn/keymap.c
new file: keyboards/chavdai40/keymaps/42keys-qwerty/config.h
new file: keyboards/chavdai40/keymaps/42keys-qwerty/keymap.c
new file: keyboards/chavdai40/keymaps/44keys-dvorak/config.h
new file: keyboards/chavdai40/keymaps/44keys-dvorak/keymap.c
new file: keyboards/chavdai40/keymaps/44keys-eucalyn/config.h
new file: keyboards/chavdai40/keymaps/44keys-eucalyn/keymap.c
new file: keyboards/chavdai40/keymaps/44keys-qwerty/config.h
new file: keyboards/chavdai40/keymaps/44keys-qwerty/keymap.c
new file: keyboards/chavdai40/keymaps/default/config.h
new file: keyboards/chavdai40/keymaps/default/keymap.c
new file: keyboards/chavdai40/mcuconf.h
new file: keyboards/chavdai40/readme.md
new file: keyboards/chavdai40/rules.mk
* commit suggestions of zvecr and fauxpark, thanks
* commit suggestions of fauxpark, thanks
* commit suggestions of fauxpark, thanks
* commit suggestions of drashna, thanks
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Create Alter folder
* Revert "Create Alter folder"
This reverts commit 361103b821dbb22957b66cdedb0d11f996def71c.
* Added a via keymap folder
* Edited files based on requested changes
* Modify VENDOR_ID of kudox-keyboard series.
* Add via support for kudox/rev3.
* Add via support for kudox/columner.
* Add via support for kudox-game keyboard.
* Remove info.json from kudox/rev1.
* Revert kudox/rev1/info.json.
* Remove redundancy spaces.
* Add key_count on kudox/**/info.json.
* Remove unsupported items from info.json.
* Modify to use rgblight_mode from rgblight_mode_noeeprom
* Remove unneed line from info.json
* Revert keyboards/kudox/rev1/info.json
* Add split_3x5_3 support to Minidox
* Add split_3x5_3 support to Miniaxe
* Add LAYOUT_mini to Centromere
This layout macro removes the need or KC_NO keycodes in the keymap.
* Add split_3x5_3 support to Centromere
* Add split_3x5_3 support to suihankey split
* Add LAYOUT_mini to centromere/info.json
* Add LAYOUT_mini to crkbd
* Add split_3x5_3 support to crkbd
* Change mini layout names
* Rename main layouts for split_3x6_3 keyboards
* Use split_3x5_3 macro for remaining keyboards
* Update relevant info.json files
* Fix suihankey/split/alpha macro
* Add layout aliases for suihankey
* Create Alter folder
* Revert "Create Alter folder"
This reverts commit 361103b821dbb22957b66cdedb0d11f996def71c.
* Add via keymap folder for n2 keyboard
* KBDfans DZ60 ANSI with Arrow also RGB Underglow as a Caps Lock Indicator
* Change all the KC_NOs to _______ (seven underscores)
* change all the KC_NOs to _______ (seven underscores)
* Update keymap.c
* Update readme.md
Update build environment setup link, make instructions link, and make instructions link.
* fix Configurator data
* rework layout macros
* enable 65_ansi_blocker Community Layout support
* fix layout macro references in info.json
* update rules.mk per fauxpark
* update rules.mk per fauxpark II
Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Added a new handwired 2x3,2x4,2x5 keyboard called the Stream_cheap
stream cheap is a diy version of the El Gato Stream deck minus the LCD keys
but you can always get relegendable keycaps to change the icon if you want
* added missing commas in info.json files
* update config to change pin definition
* changed keymap.c for 2x4
was trying to add macros and multi key commands to the keymap,
i added 2 ctrl commands that have more than one key i.e. ctrl-k-c (visual studio comment hot key)
and i added a test string to see how type out a string with the press of a button
* testing more changes to the keymap to the 2x5
* Update keyboards/handwired/stream_cheap/2x3/2x3.c
* Update keyboards/handwired/stream_cheap/2x3/config.h
* Update keyboards/handwired/stream_cheap/2x3/rules.mk
* Update keyboards/handwired/stream_cheap/2x5/config.h
* Update keyboards/handwired/stream_cheap/2x5/info.json
* Update keyboards/handwired/stream_cheap/2x3/config.h
* Update keyboards/handwired/stream_cheap/2x3/info.json
* Update keyboards/handwired/stream_cheap/2x4/config.h
* Update keyboards/handwired/stream_cheap/2x4/info.json
* Update keyboards/handwired/stream_cheap/2x4/keymaps/default/keymap.c
* Update keyboards/handwired/stream_cheap/2x5/info.json
* Update keyboards/handwired/stream_cheap/2x5/config.h
* Update keyboards/handwired/stream_cheap/2x5/rules.mk
* Update keyboards/handwired/stream_cheap/2x4/2x4.c
* Update keyboards/handwired/stream_cheap/2x4/config.h
* Update keyboards/handwired/stream_cheap/2x4/info.json
* Update keyboards/handwired/stream_cheap/2x5/2x5.c
* Update keyboards/handwired/stream_cheap/2x4/rules.mk
* removed file as per request of user zvecr
* removed line in rules.mk for 2x5
* Update keyboards/handwired/stream_cheap/2x5/keymaps/default/keymap.c
* Apply suggestions from code review
changes suggested in code review
* Initial qaz commit
* Enable combos
* Improved default keymaps
* Fixed configurator json
* Via initial
* Corrected VIA json
* touch
* Via fixes
* Fixed via matrix
* Formatting
* Add lighting to qaz
* Add rgb animations, add rgb to l2, fix error in via json, enable rgblight by default
* Update QAZ readme
* Remove VIA json, prep for PR
* Correct default bootloader for pro-micro
* Remove accidentally added submodules
* Change names of layout macros
* Move combo defs to keymap folders, fix layout names in info.json
* Fixes transposition of comma and dot keys on default keymaps
* Update keyboards/qaz/keymaps/default/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/qaz/keymaps/default_big_space/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/qaz/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/qaz/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/qaz/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* branch keyboards/kinesis/kint2pp from keyboards/kinesis/stapelberg
Changes will be made in the next commit
* [Keyboard] update wiring for kinT (kint2pp variant)
* add QMK plumbing
* Apply zvecr’s suggestions from code review
* Update keyboards/kinesis/kint2pp/config.h
* Update keyboards/kinesis/kint2pp/config.h
* remove superfluous config.h include
* Add Instant65 to QMK
* Fix via map
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added via support for 7sKB
-Changing the VID
-Add a keymap via
* Update keyboards/7skb/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/7skb/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Change of VID
I got a new VID and I'm changing the VID.
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* updated iris and kyria keymaps
* added symbols I forgot to add to keymap
* Update keyboards/keebio/iris/keymaps/jhelvy/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* condense code
Co-authored-by: Ryan <fauxpark@gmail.com>
* condense code
Co-authored-by: Ryan <fauxpark@gmail.com>
* made another small fix to a missing symbol in my iris keymap
Co-authored-by: Ryan <fauxpark@gmail.com>
* [Keyboard] Initial Keybage/RadPad firmware
* [Keyboard] RadPad apply pull request feedback
- Change `LAYOUT_***_Encoders` to `LAYOUT_***_encoders` in <keyboard>.h
- Remove bootloader comments and unnecessary build options from rules.mk
- Use `LTO_ENABLE`
- Remove empty config.h from default keymap
- Remove trailing ` \` from keymap
* [Keyboard] RadPad fix info.json
- Change `LAYOUT_***_Encoders` to `LAYOUT_***_encoders` in info.json
* [Keyboard] Add host LED status to OLED display
* [Keyboard] Use LAYOUT_4x4_encoders, not LAYOUT
* [Keyboard] Use LAYOUT_4x4_encoders, not LAYOUT
* [Keyboard] Remove DESCRIPTION from config.h
* rewrite keyboards/massdrop/ctrl/keymaps/responsive_pattern/keymap.c in respopnse to the last update (#5328)
* remove print.h
* changed default parameters, modified readme
* I2C_TIMEOUT is not defined on arm teensy
* Work round teensy having different ChibiOS config options
* Stash OLED conf files
* update comment
* update comment
* Remove stm32 alias to allow teensy alt mode
* adding via support for Dactyl Manuform 5x7
* Changing Vendor ID from FEED to 444D (DM)
* Update keyboards/handwired/dactyl_manuform/4x6/config.h
Fixing typo in Dactyl Manuform 4x6 Product Id
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/dactyl_manuform/4x5/config.h
Fixing typo in Dactyl Manuform 4x5 Product Id
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Roland Bernau <roland@bernau.dev>
Co-authored-by: Joel Challis <git@zvecr.com>
* new keyboard for squiggle.
* added pic and other layout.
* updated readme.
* following drashna's suggestions.
* removed an empty line and right hand as master.
* following fauxpark's suggestions.
* following manna-harbour's suggestions.
* trying to satisfy PR Lint keyboards
* manna-harbour forgot to add it.
* following fauxparx's suggestions.
* following fauxpark's suggestions.
* following fauxpark's suggestions.'
'
* following fauxpark's suggestions.
* following fauxpark''s suggestions.
* upated info.json to represent the actual layouts.
* following noroadsleft's suggestions.
* Add new keyboard, the N87
* Deleted config.h and readme.md on tsangan keymap folder
* Edited layout names on keymap.c and n87.h. Disabled audio
* Edited files based on requested changes, re-enabled audio on extra data pin B7, enabled audio click, disabled music mode
* Updated the wiring matrix for symmetric_standard layout
* start of punk75 keyboard
* preliminary code for the punk75 keyboard
* readme
* changes to work with USBasp
* changed cols and added configurable led
* set LED's pin as output
* changed led to new port and added rotary encoders
* added code for rotary encoders
* fixed col pins
* fixed encoder orientation
* added delay for tap_code so encoder works as intended
* added preliminary keymap for mine
* personal keymap for punk75
* personal keymap for punk75
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* fixed image
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Write firmware for the Ferris keyboard
Took inspiration from the gergoplex and the ergodox_ez firmware for the
split matrix with io_expander on the right hand.
Cleaned up a lot of bit fiddling on the mcu side by taking inspiration
from the `split_custom` in quantum.
Still bit fiddling on the mcp side as it is particularly natural to do
so with the abstractions provided by the i2c protocol. Would be good to
clean that up and abstract away the wiring from the generic i2c code in
a similar fashion as quantum and the mcp side behave.
One improvement over the ergodox_ez and the gergoplex firmwares is that
the wiring is straight forward as opposed to swapping rows and columns
in two different places that end up cancelling out for some reason.
At this stage, I have flashed this firmware to a board and have verified
that all keys are behaving as intended by shorting pins.
I still have to solder in some switches and test that everything works
correctly at normal typing speeds, but I don't expect any major issues
given I'm building up on previous effort, including the debouncing code
from the ergodox_ez.
* Remove rotation from info.json and label the keys as per default keymap
* Comply with minor review feedback points
* Use CUSTOM_MATRIX=lite to remove boilerplate
* Update keyboards/handwired/ferris/info.json
Didn't play nicely in the configurator
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove MIDI_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove FAUXCLICKY_ENABLE from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Prefer wait_ms over _delay_ms
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused include
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove unused includeh
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use dprint over print and remove include for print.h
* Remove all unused includes
* Remove unused code
* Cleanups thanks to code review
* Move more personal settings from the ferris config to the default keymap config
These setting happen to be unused in the default keymap at the moment,
as it has only one layer with no homerow modifiers and no mouse key; but
I would like to keep it there for two reasons:
* It can serve as an example to people creating their own keymap
* I plan to design a more usable default keymap that uses these features
once this PR which adds the Ferris keyboard is merged.
* Consolidate mcp logic inside matrix.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* readded adelheid files
* reworked keymaps
- moved my personal keymap to a new folder
- added a new default keymap
* removed unnecessary backslash
* reenabled command rule
* bumped device number
* fixed layout for configurator
* applied suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Create Alter folder
* Revert "Create Alter folder"
This reverts commit 361103b821dbb22957b66cdedb0d11f996def71c.
* Add Alter keyboard
* Fixed keymap.c
* Fixed another issue on the keymap.c
* Updated the files based on the comments
* Edited default keymap and enabled rgbanimations on config.h
* Updated the info.json
* via support for the skog lite
* some code cleanup before submission
* Update keyboards/percent/skog_lite/keymaps/via/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/percent/skog_lite/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update info.json
* Update keyboards/kbdfans/maja/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kbdfans/maja/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* update keymap
* update ilpse template as well
* fix some key items
* move quote the first layer
* figure out brackets
* update ilpse keymap
* update arrow keys on alice
* change layers
* update layers again
* switch to vim keys
* add mouse keys
Co-authored-by: Khader Syed <khader.syed@aicure.com>
- Fix typo in the default layout.
- Move esc and del to the navi layer.
- Fix issue with oneshot layers and double tap aka DBL_TAP.
- Add caps lock to the raise layer.
Was relying on a broken behavior for the double tap to work with
oneshot keys, i.e. the oneshot layer not being cleared after a key
press in `process_record_user`, which allowed me to first press an
oneshot key, then double tap and then a key. With the behavior fixed,
this no longer works. As the oneshot layer will be cleared when double
tap is pressed.
To make double tap useful again. I changed that any of the layer keys
does not clear the double tap. Which allows me for example to first
press double tap, then an oneshot key and then a key. So now I'm able
to type my double symbols again.
* Re-enable mouse keys to fix Chrome OS media keys
I'm not sure if there's a bug in Chrome OS, QMK, or both, but
EXTRAKEY_ENABLE isn't sufficient for media keys to work on Chrome OS.
Instead, MOUSEKEY_ENABLE is also required.
* Remove unnecessary SPLIT_USB_DETECT for Lily58
I've since swapped my Lily58 back to Elite-C v2 controllers with working
VBUS detection.
* Move Crkbd Esc and Ctrl keys; add some shortcuts
* Move MC_ALTT to userspace for cross-board support
* Sync Lily58 keymap with Crkbd
* Fix typos
* Added Handwired Redragon Keyboard as well as default and via keymaps
* Update keyboards/handwired/boss566y/redragon_vara/info.json
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/redragon_vara.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/redragon_vara.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/keymaps/default/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/boss566y/redragon_vara/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/handwired/boss566y/redragon_vara/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keymap.c
Removed defined keycodes from via keymap
* Update keymap.c
replaced defined keycodes in default keymap
* Update readme.md
Changed image to one that matches the physical keyboard
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add support for YDKB Chili
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* Updated VIA Support
- Added LAYOUT_all Support for VIA compatibility
- Updated default dp60\layouts\via\keymap.c to mmirror changes to
LAYOUT_all
- Rules.mk updated in both base and via directories.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
Co-authored-by: Will <wailinnyu@gmail.com>
Co-authored-by: Andrew Koh <andrew@springlabs.com>
Apparently VIA allocates bits in the layout options field from the
lowest bit, but starting from the **last** option defined in the JSON
file. So the default value 0x06 was actually trying to set the value
`3` (`0b11`) for the second-to-last option ("Right Shift"), which had
only 3 values defined, and the attempt to set an undefined option value
caused the VIA app to hang with a black window.
Fix the default layout options so that it works as intended (the
"Macropad" and "65% Column" options are set).
* Started AHK Companion Development
* Updated the readme
* Added AutoHotKey companion file
* Updated documentation
* Cleaned up the files and revised documentation
* Finished the readme.md updates
* Fixed the LED issue where the last LED did not reflect the right color
* Adding VIA support for 40percentclub/luddite
* Update config.h
* Update rules.mk
* Delete config.h
config.h was created to override the "default" of RGBLED_NUM 8
deleting the file to keep with defaults
* Removing block and comment as suggested
* Update PRODUCT_ID
Changing from:
#define PRODUCT_ID 0x0A0C
To:
#define PRODUCT_ID 0x4C55 // "LU"
* Changing Vendor ID
Changing Vendor ID from:
#define VENDOR_ID 0xFEED
To:
#define VENDOR_ID 0x3430 // "40"
* Adding VIA support to cannonkeys/practice60
Adding VIA support to cannonkeys/practice60
* updated VENDOR_ID to match other CannonKeys boards
* changed PRODUCT_ID to be unique
* added additional notes to readme.md
* keymap.c and config.h for VIA support
* Update readme.md
* Update keyboards/cannonkeys/practice60/readme.md
* Update keyboards/cannonkeys/practice60/readme.md
* Update keyboards/cannonkeys/practice60/config.h
* Update rules.mk
* Update keyboards/cannonkeys/practice60/config.h
* Update config.h
* Rebased from Master
Rebased from Master
* Trying to fix problems in my kyria steez
* repeating last commit.....
* repeating last commit on EDIT layer but swapping direction
exit
* moving the reversed desktop moves to the symbol layers on the same hand, for easier activation
* adding mac desktop movement keys to Kyria layout
* Adding readmes to my keymaps
* Removing a png...
* Update keyboards/ergodox_ez/keymaps/rmw/keymap-mac.c removing EPRM case
* Apply suggestions from code review
Great updates to various old-school or outdated ways I was doing things, removing some commented out code, etc.
* Apply suggestions from code review
Additional improvements
* Moving tapdances.cpp to userspace as tapdances.c
* reindenting the Kyria keymap to follow four-spaces convention, turning off oled on my kyria, improving the led handling on the Ergodox.
* updating led stuff on the other two versions of the keymap, removing EPRM key from main keymap
* Apply suggestions from code review
I'm adding these various removals to the config file because it seems that at this time those settings are in harmony with the ergodox_ez defaults.
* Moving encoder functions into their own userspace file
* Apply suggestions from code review
Removing settings that are now defaults, clearing out placeholder custom keycodes (smh)
* updating encoder functions.
* Moving to LAYOUT_stack for all layers, adding end of file newlines, switching to some shorter keycode aliases
* Okay, refactor is well underway.
* refactored! Also improved led handling for ergodox and rgb handling for kyria
* removing mac/windows swappable version because I don't feel like dealing with it when reflashing is so easy.
* moving LAYOUT_stack into kyria.h
* moving the alternate default layer down next to QWERTY
* [Keymap] Add pierrec83's gherkin keymap
Contribute my gherkin keymap upstream as it is semi-stable. It has grown
in symbiosis with my Kyria keymap which is already upstream.
Add a readme
* Remove generated keymap and instructions to generate it as it is done by qmk flash
* Initial fork of Sinc
* Setup keymaps, layouts, and encoders
* Add ANSI configurator layout
* Add ISO layout for configurator
* Add all layout option for configurator
* Fix spacing
* Remove extra line
* Remove unneeded ifdef
* Update readme.md description
* Enable bootmagic lite
* Update USB descriptor
* Add modern led code
* Update default keymap for readability
* Update default keymap readme with layout image
* Add VIA keymap
* Update keyboards/noxary/268_2/keymaps/default/readme.md
Flip order of layout image and title
* Update keyboards/noxary/268_2/keymaps/via/readme.md
Flip order of layout image and title
* Update keyboards/noxary/268_2/readme.md
bullet point keyboard maintainer
* Update keyboards/noxary/268_2/readme.md
Change list style
* Update USB descriptors
* Update default keymap for readability
* Update readme description
* Update rules.mk build options, enable bootmagic and mousekey
* Add commented modern led code
* Add VIA keymap
* Update default keymap readme.md layout image
* Update keyboards/noxary/x268/rules.mk
remove incorrect comment
* Update keyboards/noxary/x268/x268.c
remove commented setPinOutput(B1)
* Update keyboards/noxary/x268/keymaps/default/readme.md
Flip order of layout image and title
* Update keyboards/noxary/x268/keymaps/via/readme.md
Flip order of layout image and title
* Update LED function to led_update_kb()
* New custom 'super alt' keymap for the Drop ALT
* Improvements to 'super alt' keymap based on PR feedback
* Fix flickering LED caps lock bug
* Code cleanup from PR feedback
* Minor keymap layout cleanup
* enable NKRO and keep consistent with bootmagic set to lite
* Update keyboards/1upkeyboards/1up60hse/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* added keyboard 5x12 to boardsource folder
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Fix incorrect delay when setting WS2812 (and similar) leds
* Add documentation for WS2812_DELAY_MICROSECONDS
* Remove improper cast to uint8_t
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
* Remove unneeded cast to uint8_t and correct math
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
* microseconds -> µs
Co-authored-by: Ryan <fauxpark@gmail.com>
* Make documentation better match the spec sheet.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Rename macro to match spec sheet
* Further correction to the delay maths for the SPI case.
Co-authored-by: Joel Challis <git@zvecr.com>
* Move ws2812_common.h to the drivers directory
* Revert "Further correction to the delay maths for the SPI case."
This reverts commit e61b56a2cfc7dfec9992a7a3af92afa50e5b8ec0.
* Remove ws2812_setleds_pin(); consolidate ws2812.h
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* initial commit for froggy 106 key mode
* add mode indicator on OLED
* use #pragma once instead of include guard
* remove unusable codes
* remove audio codes, because helix rev.2 has no audio feature
* use set_single_persistent_default_layer
* remove eeprom update check
OLED Display fixes
Add support for RGBLIGHT Layers
Add gaming layer to corn and kyria
RGBLight Startup Animation fixes and improvements (uses matrix_scan now!)
Pimoroni Trackball support added (IT'S RGB!!!)
Fix issues due to code changes
* Add S7 Elephant Rev2 Support
* Apply suggestions from code review
I tested the changes on my board as well, thanks for the suggestions!
* Added a default folder in the makefile so that this would no longer be a breaking change
* added bordsource 3x4 macro pad
* added bordsource 3x4 macro pad
* Update keyboards/boardsource/3x4/3x4.h
* Update keyboards/boardsource/3x4/3x4.c
* Update keyboards/boardsource/3x4/config.h
* Update keyboards/boardsource/3x4/config.h
* Update keyboards/boardsource/3x4/config.h
* Update keyboards/boardsource/3x4/config.h
* added link to readme
* Update keyboards/boardsource/3x4/keymaps/default/keymap.c
* Apply suggestions from code review
* changed the layout to refelect the keyboard
* Update keyboards/boardsource/3x4/info.json
Oh your right my bad. In the future is there an easier way for me to test the info.json and the confiscator before doing my pr?
* Apply suggestions from code review
* got 3x4 building again
* Apply suggestions from code review
* applied requested change on readme
* Update keyboards/boardsource/3x4/readme.md
* Apply suggestions from code review
* add ansi and iso layouts
* fix iso map mistake
* fix mistake again...
* Update keyboards/kbdfans/kbd67/mkii_soldered/keymaps/iso/keymap.c
* rename layout macros to the blocker variants and add ansi_split_bs
* Apply suggestions from code review
* Add Kyria keymap
* clean split hand detection code
* rename "joystick" to "thumbstick"
* thumbstick overhaul
* removed angle correction, seems buggy
* save some memory
* Remove deprecated config option
* Use the correct types for getting host led states
* Fix include path
* Made .h files for encoder and oled code
* Increase speed cap on thumbstick
* Add custom corne keymap
* Clean up rules.mk
* Clean up base layer on keymap.c
* Clean up lower layer on keymap.c
* Clean up raise layer on keymap.c
* Clean up adjust layer in keymap.c
* README cleanup
* replaced "normal" numbers with "keypad" numbers:
KC_P4 replaced by KC_KP_P4
* replaced "normal" keys on Numpad Layer with the "KeyPad" keys
KC_1 replaced by KC_P1 etc.
* Fixing via issues
* Fixing whitespace issues on the keymap
* Fixed the default via layer 1 keymap, was a little weird before
* Removing redundant declarations in via/rules.mk
* preliminary check in, basically a copy from 159's github with a few additions to get it to compile
* update readme
* fixup the LAYOUT macro labels to be more reasonable
* add tkl_ansi LAYOUT macro for community layout support
* clean up rules.mk, add community layout suport, and add in bootloader
* add a tsangan layout macro
* spruce up readme
* add VIA keymap
* add qmk configurator support
* Update keyboards/projectkb/signature87/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/projectkb/signature87/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/projectkb/signature87/rules.mk
Co-authored-by: Joel Challis <git@zvecr.com>
* remove unneeded file
* Update keyboards/projectkb/signature87/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/projectkb/signature87/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/projectkb/signature87/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Using the wpm feature, I create a responsive OLED animation that changes based on how fast the user types. As written there are three phases (It's bongo cat!) but can easily be reconfigured and replaced with other images.
Multiple byte arrays consume considerable space so choose your usage wisely. When customized, the smaller the byte array used, the better, due to space limitations on most microcontrollers.
I made this with no prior knowledge of C, so I'm looking forward to any and all suggested improvements.
Credit is owed to obosob for laying the foundation for this little script as well to /u/pixelbenny for graciously providing the bongocat artwork I adapted for the animation.
The config.h includes a tweak to the Kyria's LED mapping, so that the order now reflects their physical positions, making animations smoother.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Simon Schuster <SimonSchuster@Simons-MacBook-Pro-2.local>
Co-authored-by: James Incandenza <james@ij.net>
A user in Discord reported that the right bracket and ISO hash keys on
KBD67 rev2 using LAYOUT_65_iso were swapped. When comparing
LAYOUT_65_iso with LAYOUT_65_ansi, the problem with a wrong assignment
of the right bracket key is obvious — that key is K1D in the ANSI layout
macro, but the ISO layout macro had K1E there, and K1D at the position
of the ISO hash key.
Fix the LAYOUT_65_iso macro by swapping those arguments (and also align
the K1D argument for the right bracket key properly).
* Gami Studio Lex60: Configurator Layout support
* correct key sizes on bottom row per lukelex
* add LAYOUT_60_ansi
To test, run `make gami_studio/lex60:default_60_ansi` and flash.
* add 60_ansi keymap
To test, run `make gami_studio/lex60:60_ansi` and flash.
* remove data for 60_ansi layout
* Added Via config for Clueboard 66
* Update keyboards/clueboard/66/keymaps/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Enabled MouseKeys
This required enabling LINK_TIME_OPTIMIZATION_ENABLE
* Added 4th layer as per tzarc's recommendation on another PR
Co-authored-by: Ryan <fauxpark@gmail.com>
ANAVI Macro Pad 8 is an open source mini mechanical keyboard with
8 keys, backlit, addressable RGB WS2812B LED strip on the back and
mini OLED display. Powered by ATmega 32U4 microcontroller and with
microUSB connector.
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Signed-off-by: Leon Anavi <leon@anavi.org>
* Add Via support for Percent Canoe
* Removed unnecessary flags from rules.mk
* Changes as per PR
* Added 2 additional empty layers (for a total of 4)
* Set a unique vendor id for all percent studio boards
* Set a unique product id for the canoe
* Fixed formatting, removed trailing comma
* Fixed PS/PT typo for vendor id
* Removed unnecessary variables
* Removed unnecessary slashes
* Fixed missing layer name
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* pick a sane VID
* add the VIA Keymap
* update copyright notice
* Update keyboards/waldo/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/waldo/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/waldo/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/waldo/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/waldo/keymaps/via/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* [Keymap] plattfot - Kyria layout
Keymap for programming, writing in both English and Swedish and
easy navigate a tiling window manager.
See README.md for more info
* Fix letter case on the headline for the readme
As suggested by fauxpark
* Update keyboards/kyria/keymaps/plattfot/keymap.c
Clean up double tap
As suggested by fauxpark
* Update led check for render_status
As suggested by fauxpark
* Update to use get_highest_layer for encoder_update_user
As suggested by fauxpark
* Missing an apostrophe in the header of the README.md
Last minute change.
* Removed explicit initialization for _DEFAULT
As suggested by drashna
* Use smaller image for the README.md
As suggested by noroadsleft
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* Fix crkbd slave matrix print to require debug_matrix
* Remove redundant include
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Re-add liles after hard reset
* repopulate with keymap
* Update keyboards/minidox/keymaps/rsthd_combos/keymap.c
Updated how the layers are defined to reduce firmware bloat
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/minidox/keymaps/rsthd_combos/keymap.c
Removed unnecessary key codes
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/minidox/keymaps/rsthd_combos/keymap.c
Removed backslash from each line of the layers in accordance with current convention.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Edit of readme
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Normalise layout and README from yttyx niu keymap.
* Correct case of README.
* Changes following review.
Co-authored-by: Nick Willis <nick@theb.org.uk>
* - Balance 12 layers now in their final form
- Added Plover layer
- Updated README to use layout images
* Add headings to layer images.
* - Remove redundent TO(_BA) from FC layer
- Link to new FC layer image from README
* Highlight home keys.
* Changes following review.
* Fix info about RGB LEDs on the bottom.
* Added RGB LEDs support
* Added RGB LEDs config options
* Added minila layout with RGB keys
* Create readme.md
* Update keyboards/ymdk/bface/keymaps/minila/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/ymdk/bface/keymaps/minila/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/ymdk/bface/keymaps/minila/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/ymdk/bface/keymaps/minila/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/ymdk/bface/keymaps/minila/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* do the basic port for the WM1
* with much help from tzarc, get the addresses correct
* make the keymap more closely mirror what the board has
* Add QMK Configurator support
* update the readme
* get indicator leds working
* enable RGB underglow
* fix up rgb underglow
* add notes regarding existence of backlight
* Update keyboards/wolfmarkclub/wm1/readme.md
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/config.h
* Update keyboards/wolfmarkclub/wm1/ld/wm1_f103.ld
* Update keyboards/wolfmarkclub/wm1/bootloader_defs.h
* Update keyboards/wolfmarkclub/wm1/config.h
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/wm1.c
* Update keyboards/wolfmarkclub/wm1/wm1.c
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/readme.md
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* Update keyboards/wolfmarkclub/wm1/rules.mk
* update readme
* Add support for Ace of Spades
* Fix the F-row mappings
* Add the tkl_iso layout
* Put KC_PAUS back in place of top layer reset
* aholland909 personal keymap for Ace of Spades
* Address PR feedback and rename to aos/tkl
* Rename keyboard implementation filenames
* Remove unnecessary layers
* info.json for the configurator
The factory TMK firmware for the TADA68 supports backlight breathing,
so I was surprised when the BL_BRTG key I set up in the online QMK
configurator didn't work.
As far as I can tell, this was just a simple omission.
* Added Chimera Ortho keymap
* Cleaning up the rules
* Removing firmware sizes
* Modified URLs to point to new locations
* Remove _quantum functions from custom matrix.c code
* Fix 1<col instead of 1<<col typo in matrix_is_on()
* Make PREVENT_STUCK_MODIFIERS the default
* Removing the IS_COMMAND custom definition
* Adding info.json
* Adding config overrides
* Adjusting for the reformat
* removing backlight reference
* fixing some compile issues
* Fixing a matrix issue
* Update keyboards/chimera_ortho_plus/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/chimera_ortho_plus.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/chimera_ortho_plus.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/chimera_ortho_plus.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/chimera_ortho_plus.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/chimera_ortho_plus.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* lining up the matrix
* Update keyboards/chimera_ortho_plus/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/chimera_ortho_plus/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/chimera_ortho_plus/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/chimera_ortho_plus/chimera_ortho_plus.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/chimera_ortho_plus/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/chimera_ortho_plus/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* added git codes
* started git layer
* finished structure for git layer. MOD: replaced mouse with mod keys on right hand
* layout changing layer
* mod enter. default qwerty layer. removed mods on number layer
* workman layout. git log, show. blank enter and bsspace
* config layer. toggleable ctrl/alt for OS
* removed keymap comments
* strings and combos layers. sarcasm and ctrl_ctv. RGB configs
* reintroduced enter and bspace. delete backspace as a function. git push -u and checkout -b
* string macros
* OS specific home/end
* OS mac & win keys. N delete global backspace
* refactored backspace functions
* ctrl lctv macro
* base layer toggle fix
* whitespace
* BS + L for FF and chrome
* replaced 1 keycode with userspace
* added userspace config
* remove comments
* add another keycode with a variable
* moved all keymaps and codes to common file
* ctrl z mod
* removed ctrl z
* sipmlified OS functions
* moved is_win to keyboard level
* added mac alt tab
* added ctrl tab in mac + clean up variables in art.h
* tild string macro. added mac left/right + home/end
* mac ctrl backspace
* enum layers for default layout
* added ergodone keymap
* ergodone compiles
* clean up
* clean up
* removed obsolete OS_HOME/END
* removed var
* added ctrl nav to split75
* ergodone clean up + caps lock fix 75
* fix mac ctrl alt on right handside. added mac alt tab left right
* fix ergodone config override
* fixed alt left right not working on mac
* added OS ctr_alt
* mac ctrl del. fix tild
* simplified tild macro
* git stash apply
* send_string_remembering_lenght
* shifted strings print
* restored KC_BSPACE functionality
* moved KC_BSPC
* numpad layer on Fn
* media lights
* ergodone final clean up
* ergodone GIT AND MEDIA layers
* ergodone GIT LAYER switch
* default behaviour for all modified keys on BASE layer
* refactored logic for default keycodes
* ergodone final layers
* ctrl_cav for translation and ctrl_l fix
* toggleable layer with numpad
* comments
* numpad layer
* Update users/art/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* enable dynamic macros for split75
* git branch and develop/master
* removed esc from Nav
* ergodone: ctrl alt for shift layer
* macros and right alt for ergodone
* fix ergodone N_backspace not working on git layers
* mac language switch with alt+shift
* Update users/art/art.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update users/art/art.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update users/art/art.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ergodone/keymaps/art/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update users/art/art.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* flashing leds to indicate current os
* using rshift on shifted layers
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Via support to the YMD09
* Update keyboards/ymdk/ymd09/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/ymdk/ymd09/keymaps/via/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Candybar: VIA support for lefty and righty
* Update keyboards/candybar/lefty/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/candybar/righty/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/candybar/lefty/keymaps/via/keymap.c
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Add Via keymap for Contra
* Added Via-enabled keymap
* Changed VENDOR_ID from 0xFEED to 0x4354 (CT)
* Removed unnecessary RGB mappings
* PR changes
* Removed empty via/config.h
* Changed product ID from 0x6060 to 0x0001
* Add files needed to The Via support on Melody 96
* Remove manufacture name from product name
* replace blank key with Transparent keys
* Update keyboards/melody96/rules.mk
* Update keyboards/melody96/keymaps/via/keymap.c
* Change Product ID to "M" + 96
* Update keyboards/melody96/keymaps/via/rules.mk
* add LTO to via's local file
* Update keyboards/melody96/rules.mk
* more stoof
* readme update
* reverting keymap
* re-adding userspace
* new userspace needed
* no want 0 under thumb
* gettin fancier with my knob
* macro fix
* had pins for oled ver
* wait, these are the right pins
* reduntant line
* image fix
* get highest layer every day
* whoops
* correct rev name in json
* a few good catches
* what I had planned
* Replace custom RCTRL implementation with built-in LM
Caveat: sends LCtrl instead of RCtrl
* Enable VIA support in KBD6X keymap
* Disable LTO on ChibiOS boards
* Disable locking support and Magic keycodes for all keymaps
* Organize and annotate rules.mk and config.h files
* Enable Console for Melody96 keymap
* L_RANGE_KEYMAP → LAYERS_KEYMAP
* Revert "Replace custom RCTRL implementation with built-in LM"
This reverts commit 17d706a82d7e31b53cd84efeb9b2ddb9922a2368.
* Set DYNAMIC_KEYMAP_LAYER_COUNT to 3 in Doro67 and Wasdat keymaps
* Enable Bootmagic Lite for all VIA keymaps
* added koy layout to qmk on xd75 board
* added koy keymap for the atreus62 board
* reduced time for autoshift
* added documentation
* changed layer 7 to a tap toggle and adjusted mouse speed a little
* Update keyboards/xd75/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h
* Update keyboards/xd75/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h
* Update keyboards/xd75/keymaps/ScheiklP/koy_common.h
* Update keyboards/atreus62/keymaps/ScheiklP/koy_common.h
* Update keyboards/atreus62/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h
* Update keyboards/atreus62/keymaps/ScheiklP/koy_keys_on_quertz_de_latin1.h
* changed keymap to lowercase name to conform with qmk guidelines
* Update keyboards/xd75/keymaps/scheiklp/rules.mk
remove unnecessary rules
* Update keyboards/atreus62/keymaps/scheiklp/rules.mk
remove unnecessary rules
* moved common files for koy layouts to the users folder and removed empty file
* Update keyboards/atreus62/keymaps/scheiklp/keymap.c
* Update keyboards/xd75/keymaps/scheiklp/readme.md
* Update keyboards/xd75/keymaps/scheiklp/readme.md
* Update keyboards/atreus62/keymaps/scheiklp/readme.md
* Update keyboards/atreus62/keymaps/scheiklp/readme.md
* Added MACLOCK macro
Added my MACLOCK macro to my Atreus keymap.
* Updated comments & readme
Documented where in the layout I added the MACLOCK macro.
* Updated with my super16 version for my keypad
* Added my folder to super16
* Set max LED brightness to 50%
* Added custom keycodes for enter/shift+enter and copy/paste on one key
* Fixed the boot up layer color
* Renamed folder
* Revert changes to root super16 files
* Update keymap config.h and rules.mk files
* Restore deleted 15game keymap files
* Corrected the hold keycode for CCCV
* Removed unnecessary comments
* Update keyboards/1upkeyboards/super16/keymaps/nblyumberg/keymap.c
Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com>
* Update keyboards/1upkeyboards/super16/keymaps/nblyumberg/config.h
Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com>
* Update keyboards/1upkeyboards/super16/keymaps/nblyumberg/keymap.c
Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com>
* Rewriting the layer color functionality
* Revisions
* Fixed the layer switching
* Fixed the default layer color problem
* Added a function suggested by Drashna but it won't compile
* Cleaned up the code for PR
* Removed unnecessary define for layer colors
Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
* [Keyboard] Added D48 keyboard.
* Updated README.
* Cleanups.
* Moved d48 to handwired/
* Added link to build process album.
* Coding conventions cleanups.
* Added DS1307 RTC!
* Minor cleanups.
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Minor refactoring.
* Readme fix.
* Moved leftover keymap-specific code from keyboard space into keymap.
* Added encoder button pins to extra matrix row.
* Updated README, updated pinout & cleaned up the glcdfont
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update config.h
* Apply suggestions from code review
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Added default keymap. Refactored existing keymap.
* Update keyboards/handwired/d48/README.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review
Co-Authored-By: Joel Challis <git@zvecr.com>
* Minor alignment fix.
* Update keyboards/handwired/d48/glcdfont_d48.c
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Changes as per PR.
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add TENKI keyboard
Add TENKI keyboard, default keymap and via keymap
* Minor Update Readme.md
Change description of hardware supported
* change layout name
change layout name from ortho_20 to ortho_5x4
* Fix invalid format in info.json
Fix invalid format in info.json
* Fix invalid format
* Fix formatting
Fix formatting tenki.h
* Fix formatting in keymap.c
Fix formatting in keymap.c
* Add new line at EOF info.json
Add new line at EOF
* Fix formatting
* Fix formatting
* Update rules.mk
Fix Formatting
* Initial
* update json, added basic oled config, updated matrix to correct rotary location
* disable oled by default
* Tuned oled for release
* Completed OLED function implementation
Correct spelling error in readme
* Fixed image in readme
* Should not be in this branch
* Incorporating recommended changes by zvecr
* Update keyboards/le_chiffre/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/le_chiffre/readme.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
markva
Xelus22
Yoonbae Cho
HASU
Maarten Dekkers
kaylanm
dp
Callum Oakley
Wilba
codecoffeecode
Mike Rix Wolfe
kelvinhall05
Viet Yen Nguyen
Rossman360
Ryan
Sendy YK
shela
Drashna Jaelre
Ramon Imbao
Ibnu Daru Aji
Dimiter Geelen
Brandon Claveria
KgOfHedgehogs
Woongki Sung
Andrew Kannan
TripTrap
David Camp
t-miyajima
KDon
ai03
Yasuhiro SHIMIZU
Tom Barnes
Jan Christoph Ebersbach
TerryMathews
mechlovin
James Young
Whale Mo
kb-elmo
Philip (Han) Suh
NightlyBoards
x1
Reibl János Dániel
vattern
moyi4681
Nguyen Minh Hoang
obosob
Danilo de Klerk
sotoba
russellsherman
Brandon
sh-xguitar
aerialviews007
Sendy YK
Jesús David
gtips
Álvaro A. Volpato
Kyle
eniigmakeyboards
Brandon Schlack
gadzkun
Ladniy
Klesh Wong
Croktopus
tominabox1
Yu Hao Wong
Frothy
chemicalwill
Leivince John Marte
AlisGraveNil
Krishna Mani
Michael Stapelberg
Andrew Kannan
Rys Sommefeldt
Josh Hinnebusch
kakunpc
CalciumNitride
Dmitry Nosachev
Salicylic-acid3
John Helveston
Valen Cheung
Joel Challis
RJ Bernau
Ingar Almklov
stanrc85
Eric Brooks
MechMerlin
Koobaczech
Matthew Weldon
Jonathan Rascher
Jonathan Wakely
Mark Sherman
Michael Krasnitski
Sergey Vlasov
Matthew Lyon
dsanchezseco
Alabahuy
ladbahuy
Nico Cesar
Joshua Rubin
Pierre Chevalier
floookay
yinxianwei
Josh Johnson
Sid Carter
Riley Inman
Jeong Arm
Gaëtan Ark
Randall Mason
QMK Bot
Fredrik Salomonsson
ytkwong
a_p_u_r_o
Naoto Takai
ajp10304
Abi Shalom
Brandon
ilikepi2
boss566y
siano
paulgali
Sam Gowland
kwlodarczy
Dongfeng Yu
Jacky Tian
akscanb
Mojitas
Nick Blyumberg
unicorn855
Herpiko Dwi Aguno
toraifu
morbetter
Gustavs Gūtmanis
Reed
Guillaume Gérard
mcginnisa
Miles Goodhew
James Smith
myoung34
Pablo Ovelleiro Corral
Adam DeHaven
jotix
Xyverz
Rozakiin
4pplet
-k
Keebz Dot Net
Danny
Stefano
Manna Harbour
LucW
Paul Ewers
Gregorio
cole smith
Joshua Diamond
Niclas
Brad Arnett
Yasha Mostofi
Dan
yiancar
Hybrid
MURAMATSU Atshshi
csc027
Thomas Lim
William Lindvall
George Mao
qunguyentk
Gautham Yerroju
mcarni
Catriel Müller
Adrian
James Incandenza
yfuku
Chandler
fluffactually
Rolf Don
clanghans
Cable Car Designs
Derek
Jeremy Bernhardt
MakotoKurauchi
Leon Anavi
itsnoteasy
Jesse Leventhal
Dan Hertz
Eduardo Lourenço Pinto Neto
goranzarkovic
onefiftynine
squizzler
yttyx
halfenergized
nathanvercaemert
Erovia
Jumail Mundekkat
KOBAYASHI Daisuke
gmadrid
shohart
Ckat
Thomas Baart
Parker Coates
Garret G
pcoleman
Kamel Makhloufi
artjomsR
Shadowtrance
Koichi Katano
jja2000
Eric Lau
Nick Brassel
Josef Adamcik
AbstractKB
Tracy Wadleigh
powerlemming
NekuSoul
Maxr1998
Vincent Lee
Konstantin Đorđević
Paul Scheikl
Peter (Rocky) Villano
dlgoodr
Conor Fischer
bottilabo
Hund
pabile
Chuck Lauer Vose
TheFourthCow
1m38
Andrew Dunai
OsciX
Eriq M. Adams
eniigmakeyboards
marksard