Ddev bump verzij php / mariadb / nodejs

.ddev/config.yaml

@@ -1,7 +1,7 @@
 name: yufu-manifest
 type: drupal10
 docroot: web
-php_version: "8.1"
+php_version: "8.2"
 webserver_type: nginx-fpm
 router_http_port: "80"
 router_https_port: "443"
@@ -10,12 +10,13 @@ additional_hostnames: []
 additional_fqdns: []
 database:
   type: mariadb
-  version: "10.3"
+  version: "10.6"
 nfs_mount_enabled: false
 mutagen_enabled: false
 use_dns_when_possible: true
 composer_version: "2"
 web_environment: []
+nodejs_version: "16"
 
 # Key features of ddev's config.yaml:
 
@@ -26,7 +27,7 @@ web_environment: []
 
 # docroot: <relative_path> # Relative path to the directory containing index.php.
 
-# php_version: "7.4"  # PHP version to use, "5.6", "7.0", "7.1", "7.2", "7.3", "7.4", "8.0", "8.1"
+# php_version: "7.4"  # PHP version to use, "5.6", "7.0", "7.1", "7.2", "7.3", "7.4", "8.0", "8.1", "8.2"
 
 # You can explicitly specify the webimage but this
 # is not recommended, as the images are often closely tied to ddev's' behavior,
@@ -61,12 +62,26 @@ web_environment: []
 # see https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
 # For example Europe/Dublin or MST7MDT
 
+# composer_root: <relative_path>
+# Relative path to the composer root directory from the project root. This is
+# the directory which contains the composer.json and where all Composer related
+# commands are executed.
+
 # composer_version: "2"
-# if composer_version:"2" it will use the most recent composer v2
+# You can set it to "" or "2" (default) for Composer v2 or "1" for Composer v1
-# It can also be set to "1", to get most recent composer v1
+# to use the latest major version available at the time your container is built.
-# or "" for the default v2 created at release time.
+# It is also possible to use each other Composer version channel. This includes:
-# It can be set to any existing specific composer version.
+#   - 2.2 (latest Composer LTS version)
-# After first project 'ddev start' this will not be updated until it changes
+#   - stable
+#   - preview
+#   - snapshot
+# Alternatively, an explicit Composer version may be specified, for example "2.2.18".
+# To reinstall Composer after the image was built, run "ddev debug refresh".
+
+# nodejs_version: "16"
+# change from the default system Node.js version to another supported version, like 12, 14, 17, 18.
+# Note that you can use 'ddev nvm' or nvm inside the web container to provide nearly any
+# Node.js version, including v6, etc.
 
 # additional_hostnames:
 #  - somename
@@ -82,6 +97,8 @@ web_environment: []
 
 # upload_dir: custom/upload/dir
 # would set the destination path for ddev import-files to <docroot>/custom/upload/dir
+# When mutagen is enabled this path is bind-mounted so that all the files
+# in the upload_dir don't have to be synced into mutagen
 
 # working_dir:
 #   web: /var/www/html
@@ -99,11 +116,11 @@ web_environment: []
 
 # nfs_mount_enabled: false
 # Great performance improvement but requires host configuration first.
-# See https://ddev.readthedocs.io/en/stable/users/performance/#using-nfs-to-mount-the-project-into-the-container
+# See https://ddev.readthedocs.io/en/latest/users/install/performance/#nfs
 
 # mutagen_enabled: false
-# Experimental performance improvement using mutagen asynchronous updates.
+# Performance improvement using mutagen asynchronous updates.
-# See https://ddev.readthedocs.io/en/latest/users/performance/#using-mutagen
+# See https://ddev.readthedocs.io/en/latest/users/install/performance/#mutagen
 
 # fail_on_hook_fail: False
 # Decide whether 'ddev start' should be interrupted by a failing hook
@@ -158,7 +175,7 @@ web_environment: []
 # If you prefer you can change this to "ddev.local" to preserve
 # pre-v1.9 behavior.
 
-# ngrok_args: --subdomain mysite --auth username:pass
+# ngrok_args: --basic-auth username:pass1234
 # Provide extra flags to the "ngrok http" command, see
 # https://ngrok.com/docs#http or run "ngrok http -h"
 
@@ -184,10 +201,57 @@ web_environment: []
 # will be available on the local network if the host firewall
 # allows it.
 
+# default_container_timeout: 120
+# The default time that ddev waits for all containers to become ready can be increased from
+# the default 120. This helps in importing huge databases, for example.
+
+#web_extra_exposed_ports:
+#- name: nodejs
+#  container_port: 3000
+#  http_port: 2999
+#  https_port: 3000
+#- name: something
+#  container_port: 4000
+#  https_port: 4000
+#  http_port: 3999
+# Allows a set of extra ports to be exposed via ddev-router
+# The port behavior on the ddev-webserver must be arranged separately, for example
+# using web_extra_daemons.
+# For example, with a web app on port 3000 inside the container, this config would
+# expose that web app on https://<project>.ddev.site:9999 and http://<project>.ddev.site:9998
+# web_extra_exposed_ports:
+#  - container_port: 3000
+#    http_port: 9998
+#    https_port: 9999
+
+#web_extra_daemons:
+#- name: "http-1"
+#  command: "/var/www/html/node_modules/.bin/http-server -p 3000"
+#  directory: /var/www/html
+#- name: "http-2"
+#  command: "/var/www/html/node_modules/.bin/http-server /var/www/html/sub -p 3000"
+#  directory: /var/www/html
+
+# override_config: false
+# By default, config.*.yaml files are *merged* into the configuration
+# But this means that some things can't be overridden
+# For example, if you have 'nfs_mount_enabled: true'' you can't override it with a merge
+# and you can't erase existing hooks or all environment variables.
+# However, with "override_config: true" in a particular config.*.yaml file,
+# 'nfs_mount_enabled: false' can override the existing values, and
+# hooks:
+#   post-start: []
+# or
+# web_environment: []
+# or
+# additional_hostnames: []
+# can have their intended affect. 'override_config' affects only behavior of the
+# config.*.yaml file it exists in.
+
 # Many ddev commands can be extended to run tasks before or after the
 # ddev command is executed, for example "post-start", "post-import-db",
 # "pre-composer", "post-composer"
-# See https://ddev.readthedocs.io/en/stable/users/extending-commands/ for more
+# See https://ddev.readthedocs.io/en/stable/users/extend/custom-commands/ for more
 # information on the commands that can be extended and the tasks you can define
 # for them. Example:
 #hooks: