* [Core] Rework PS/2 driver selection
Enabling and selecting PS/2 driver was using old approach,
so it was reworked to current approach, inspired by Serial
and WS2812 driver selections.
* [Keyboard] Update keyboards using PS/2 to use new PS/2 driver selection
* [Docs] Update PS/2 documentation to use new PS/2 driver selection
* Fix indentation
* [Core] Add PS2 to data driver
* Fix oversight in property name
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add PS/2 pins to data driven mappings
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add ARRAY_SIZE and CEILING utility macros
* Apply a coccinelle patch to use ARRAY_SIZE
* fix up some straggling items
* Fix 'make test:secure'
* Enhance ARRAY_SIZE macro to reject acting on pointers
The previous definition would not produce a diagnostic for
```
int *p;
size_t num_elem = ARRAY_SIZE(p)
```
but the new one will.
* explicitly get definition of ARRAY_SIZE
* Convert to ARRAY_SIZE when const is involved
The following spatch finds additional instances where the array is
const and the division is by the size of the type, not the size of
the first element:
```
@ rule5a using "empty.iso" @
type T;
const T[] E;
@@
- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
@ rule6a using "empty.iso" @
type T;
const T[] E;
@@
- sizeof(E)/sizeof(T)
+ ARRAY_SIZE(E)
```
* New instances of ARRAY_SIZE added since initial spatch run
* Use `ARRAY_SIZE` in docs (found by grep)
* Manually use ARRAY_SIZE
hs_set is expected to be the same size as uint16_t, though it's made
of two 8-bit integers
* Just like char, sizeof(uint8_t) is guaranteed to be 1
This is at least true on any plausible system where qmk is actually used.
Per my understanding it's universally true, assuming that uint8_t exists:
https://stackoverflow.com/questions/48655310/can-i-assume-that-sizeofuint8-t-1
* Run qmk-format on core C files touched in this branch
Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
* Working on new dactyl
* Preliminary build and keymap in place for 4x5_5 dactyl manuform
* Removing first attempt to use 4x5
* Updating to match c style guide
* Fixing issues after merge, deletion of dactyl_manuform.h
* Spliting out custom keymap
* Adding license headers
* Fixing EE_HANDS detection on Pro-Micro
The pro-micro was not working when I plugged into the elite-c on the
right hand side of my keyboard. Adding the SPLIT_USB_DIRECT definition
fixed the issue.
* Apply suggestions from code review
Adding Drashna's delete comments
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Removed config.h for keymaps and tweaked keymap
Per Drashna's pr review, I have removed the config.h files for the
keymaps.
Also tweaked my keymap to switch backspace and enter. Added tapping
toggle for RAISE.
* Further tweaking ssedrick keymap for dactyl_manuform 4x5_5
As with most new keyboards, they take some getting used to.
I've rearranged my thumb cluster to hopfully a more long
term solution.
* Adding missing KC_BSLS to ssedrick keymap for 4x5_5
Co-authored-by: Drashna Jaelre <drashna@live.com>
* 46: Copy from 52 and file rename
* 46: File internals refer to 46, not 52
* 46: Board remove row
* 46: Keymap: Lshift becomes ctrl, Rshift a symbol
- ESC and CAPs on upper thumbs
- AltGr and App on upper thumbs
- Page up/down on upper thumbs
- F11, F12 and mods for them on adjust
* 46: Readme update for json script, tweaks
* 46: Board fix LED count
* 46: Keymap: Arrows right, symmetric layer keys
* 46: Readme: Image link with and w/o outer pinkie
* 46: Keymap: link fixed image of nav layer
* 46: Keymap: fix reaching adj layer
Co-authored-by: mmccoyd <mmccoyd@cs.berkley.edu>
* 52 Keymap.json: Set for Hillside 52
- Change script rows
* 52 Keymap.c: mirror .json
CAPSWORD, QK_BOOT, readme cleanup, EE_RST
* 52 Keymap.json: Initial files copy from 56
* 52 Keymap.json nav/edit lay, thumb shift, syms
- Del in backspace spot on sym layer
- Thumb shift OSM instead of extra space
- Nav/edit on num/fn: arrows cut copy paste undo redo, page up/down
- Fn keys bottom row to allow nav edit keys
- App and AltGr on lower row, on their layer
- Braces on index, so more common -= on middle ring.
- Adjust has Ctrl/GUI swap
- EE_RST, CAPSWORD, QK_BOOT, SPLIT_DETECT
* 52 Family: readme image and folder link
* 52 Board: initial copy from 56
* 52 Keymap via
* 52 Board: remove keys, cant columns, better ids
- .json: vid: MM, pid: H52
* 52 Keymap.c: initial.c copy from 48
* QK_BOOT EE_CLR, not ANY(), as config.qmk supports
- CAPSWRD instead of ANY, though config.qmk still converts to ANY()
* Cleanup readme
* 52 Keymap: Remove redundant key, cleanup script
* 52 Keymap: Fix template
* 52 Readme: Link lower res image better for readme
Co-authored-by: Drashna Jaelre <drashna@live.com>
* 52 Keymap: Move pretty-print script to GitHub wiki
* 52 Keymap: Link to 1024 res image thumbnails
* 52 Keymap: fix whitespace before image link
* Family: Fix image link to 1024 thumb
Co-authored-by: Drashna Jaelre <drashna@live.com>
* 52: Keymap: Caps word on a layer home row
* 52: Keymap: Arrows on right. Symmetric layer keys.
- Nav:
- Arrows on right so up/down more intuitive. Page up/down on ends
- Cut on home row, as more common
- Sym:
- Layer mods on activate hand, extras symbols on left
- Common digits on lower row
- Base:
- Layer keys symmetric, on most extended, not resting, thumb
- Mute on util key for easy use
- Swap layers 3 and 4 to match swapped thumbs
Co-authored-by: mmccoyd <mmccoyd@cs.berkley.edu>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Unfortunately, the crippled versions of “Bluepill” boards with
STM32F103C6xx chips instead of STM32F103C8xx are now sold all over the
place, sometimes advertised in a confusing way to make the difference
not noticeable until too late. Add minimal support for these MCUs in
the common “Bluepill with stm32duino” configuration, so that it could be
possible to make something useful from those boards (although fitting
QMK into the available 24 KiB of flash may be rather hard).
(In fact, I'm not sure whether the “STM32” part of the chip name is
actually correct for those boards of uncertain origin, so the onekey
board name is `bluepill_f103c6`; another reason for that name is to
match the existing `blackpill_f401` and `blackpill_f411`.)
The EEPROM emulation support is not included on purpose, because
enabling it without having a working firmware size check would be
irresponsible with such flash size (the chance that someone would build
a firmware where the EEPROM backing store ends up overlapping some
firmware code is really high). Other than that, enabling the EEPROM
emulation code is mostly trivial (the `wear_leveling` driver with the
`embedded_flash` backing store even works without any custom
configuration, although its code is significantly larger than the
`vendor` driver, which may also be important for such flash size).
* PMW33XX drivers overhaul
This combines the PMW3389 and PM3360 drivers as they only differ in the
firmware blobs and CPI get and set functions. The following changes have
been made:
* PMW3389 now gets the same multi-sensor feature that is already available on the
PMW3360.
* Introduced a shared pmw33xx_report_t struct is now directly readable via SPI
transactions instead of individual byte-sized reads, saving multiple
copies and bitshift operations.
* pmw33(89/60)_get_report functions had unreachable branches in their motion
detection logic these have been simplied as much as possible.
* The fast firmware upload option has been removed as this becomes obsolete by
the newly introduced polled waiting functions for ChibiOS polled waiting
* PMW33(60/89)_SPI_LSBFIRST and PMW33(60/89)_SPI_MODE config options
have been removed as they don't need to be configurable.
* All PMW3389 and PMW3360 defines have been unified to a PMW33XX prefix
to reduce code duplication and make the defines interchangeable
* Adjust keyboards to PMW33XX naming scheme
* Use polled waiting on platforms that support it
Due to context switching overhead waiting a very short amount of time on
a sleeping thread is often not accurate and in fact not usable for timing
critical usage i.e. in a driver. Thus we use polled waiting for ranges
in the us range on platforms that support it instead. The fallback is
the thread sleeping mechanism.
This includes:
* ARM platforms with CYCCNT register (ARMv7, ARMv8) this is
incremented at CPU clock frequency
* GD32VF103 RISC-V port with CSR_MCYCLE register this is incremented at
CPU clock frequency
* RP2040 ARMv6 port which uses the integrated timer peripheral which is
incremented with a fixed 1MHz frequency
* Use wait_us() instead of chSysPolledDelayX
...as it is powered by busy waiting now.
* Add chibios waiting methods test bench
* Add missing '(' to print_bin_reverse32 declaration
* Fix insufficient character buffers on satisfaction75
* Remove \0 character in format string and use corrected offset math
instead on rocketboard 16
* Replace snprintf_ with snprintf for djinn
* Explicitly ignore format checks for tracktyl manuform that uses %b
specifier
* Print properly escaped version string in command.c, as PRODUCT or
other defines can contain constructs like 'Vendor keyboard 66%' which
will be interpreted as a format specifier
* Tentative Teensy 3.5 support
* Set firmware format to .hex for ARM Teensys
* Got to "device descriptor failed" by comparing with Teensy 3.6 code
* Drop down to 96MHz...
* Bump back up to 120MHz
* Disable RESET keycode because of naming conflicts
* Add Pico SDK as submodule
* Add RP2040 build support to QMK
* Adjust USB endpoint structs for RP2040
* Add RP2040 bootloader and double-tap reset routine
* Add generic and pro micro RP2040 boards
* Add RP2040 onekey keyboard
* Add WS2812 PIO DMA enabled driver and documentation
Supports regular and open-drain output configuration. RP2040 GPIOs are
sadly not 5V tolerant, so this is a bit use-less or needs extra hardware
or you take the risk to fry your hardware.
* Adjust SIO Driver for RP2040
* Adjust I2C Driver for RP2040
* Adjust SPI Driver for RP2040
* Add PIO serial driver and documentation
* Add general RP2040 documentation
* Apply suggestions from code review
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
jack
Ryan
QMK Bot
nodatk
Drashna Jaelre
Stefan Kerkmann
Pascal J
Joseph Fass
Johannes Löthberg
Joe Scotto
Joshua Diamond
Mike Ryan
Nick Lopez
Cao Thai Duong
Joe Scotto
Joel Challis
Jacqueline Liang
James Young
Dasky
Marek Kraus
Jeff Epler
Stefan
Davide Masserut
Brandon Claveria
yiancar
Marko Skakun
Shem Sedrick
mmccoyd
Sergey Vlasov
Nick Brassel
dvermd
Diogo Sergio
David Kühling
Bartosz Nowak
Manna Harbour
precondition
Michał Szczepaniak
Jouke Witteveen
Ryan Skidmore
Takeshi ISHII
Vino Rodrigues
DL Ford
LegoWolf
holtenc
Tyler Tolley
Nabos
Daniel Perrett
m40-dev
Joshua Barber
Uthol
Umberto Baldi
xiao
Dari