*NOTE:* it might still be desirable to set the software layout to sv_SE in your
OS.
Swedish (sv_SE) Qwerty layout for ErgoDox, based on the Default configuration
I have tried making this as close of a match I could between the [default
ErgoDox EZ configuration](https://ergodox-ez.com/pages/our-firmware) and a
standard Swedish Qwerty layout.
Notable differences from default:
=================================
* There are three special character buttons (acute accent, circumflex/tilde and
apostrophe/asterisk) that don't have any buttons to map to naturally. I've put
these at other places:
* Acute accent (´) can be found in the lower left corner, conveniently
placed to reach for making an é.
* Apostrophe (') was put in the lower left corner, close to acute accent.
* Circumflex (^) and asterisk (*) was placed in the lower right corner.
* Tilde (~) and diaeresis (¨) I couldn't find a good place for, so I left
those out. I could only get the buttons to produce a single one of the
characters. How can I get it to work properly?
* The Alt button on right thumb was exchanged for AltGr (RAlt).
* I changed the backslash in the numpad (layer 1) for a minus. Thought it was
more sensible.
* I didn't find a good place for the "<>|" button, so that one was left out.
That is a problem that really needs to be resolved. Pipe can be found on layer
one, however.
* Added orthodox
* Modified readme
* Modified readme
* Modified readme
* Updated makefile
* Fixed keymap issues
* Modified serial communications to allow for over 8 columns
* Fixed sizeof command
* Fixed some typing issues
* Testing issue #1191 (n-column split i2c slave)
Based on initial OrthoDox (serial) config by @reddragond and others,
this attempts to add TWI (I2C) support.
Relevant: <https://github.com/qmk/qmk_firmware/issues/1191>
- per @ahtn recommendation, using memcpy for moving slave matrix
into slave sending buffer
- slave buffer has been enlarged using sizeof(matrix_row_t)
- note: i2c.h now includes matrix.h
- note: matrix.c includes <string.h>
* Added i2c keymap - right col still not working
* orthodox: re-added i2c keymap, based on serial
* orthodox / issue #1191: trying 9-bit serial
- orthodox serial protocol now sends 9 bits per row, instead of 16.
Technically it's using MATRIX_COLS, so it might work generically.
- ROW_MASK is #defined in serial.c to truncate the checksums to prevent
overflows causing false errors. This macro should be renamed if it's
kept.
* Revert "Fixed sizeof command"
This reverts commit f62a5b9939d6a9c0e442ec403de00c14431a55f9.
Changes had been made to the lets_split serial driver for testing which
mirrored the multi-byte-row changes made to support the orthodox. As the
lets_split does not require these changes, and new improvements had
been added to the orthodox port only, this commit reverts them.
Because the new code could potentially reduce latency over the serial
transport, it may be desirable to re-add in the future, by backporting
the current working orthodox code.
* orthodox: default serial keymap improvements
- formatting has been improved
- a few keys have been shifted, mainly in Raise and Lower layers,
to be more like the default Planck layout
- Now available: F12, Home, End, PgUp, PgDn, Media-Next, Media-Play
Still To Do:
- duplicate for TWI
- Alt modifier
- GUI modifier
* orthodox: failed attempt at 16b/row TWI
- duplicated updated serial keymap for "i2c"
- removed string.h/memcpy, instead
- hardcoded copying of six bytes per update
- still doesn't work; master reports interconnect errors on txled
* orthodox: adjusted default keymap
- this is applied to both 'serial' and 'i2c' keymaps
- Alt and GUI have been added, as they were missing
- comma and period persist across more layers; Home/PgUp and End/PgDn
have been moved slightly to accommodate
* orthodox: revert TWI support to minimum to debug
- disabled ssd1306 and hardware locking in build configuration
- increased TWI buffer from 0x10 to 0x20 bytes
- decreased TWI clock from 400000 to 100000
- removed hardcoded TWI multi-byte sending/receiving
An 'i2c' build of this was found to work on a rev1 Orthodox, although
slave-side col9 was understandably not working. When testing-time
permits, features will be gradually re-enabled towards getting the full
matrix supported over TWI.
* orthodox: TWI (i2c) is working, kludge for col9
The TWI interconnect ("i2c" in directories and build config) is now
working for the Orthodox, including the slave half's column #9.
This is intended as an interim solution, as it's a kludge, not a fix.
Rather than a working multi-byte implementation, the two col9 keys'
bits are packed-into and unpacked-from the two unused bits in row1.
Furthermore, the TWI clock constant has been reduced to 100000 from
400000, as testing revealed the higher value just didn't work.
Testing also found that (with this kludge) increasing the TWI buffer
was not necessary.
This commit leaves many commented-out lines in matrix.c from previous
testing, which will be removed in a future commit once the
interconnects' multi-byte problems have been debugged more thoroughly.
* orthodox: updated readme.md
The readme for the Orthodox now includes a description of the keyboard,
allusions to its author and availability, a linked photo, and links to
the evolving build guide and the current keymap on KLE.
This update has been prepared with /u/Deductivemonkee's assistance.
Added basic description of the keyboard and some build and configuration
instructions.
Also moved the RGB underlight modification instructions to the readme.
The previous default configuration and keymap was made for a Phantom
modified with RGB underlight.
This commit makes the default more in line with the "official"
configurations provided by the PCB.
The previous default have been moved to a separate keymap named
`rgbmod`. It has also been updated to better match the template keymap.
It's a little unclear what the style guidelines are for the QMK project.
But I figured that I should at least keep the indentation consistent
within the KMAC part.
Previously KEYMAP referred to the KEYMAP_ARROW layout and had 45 keys. It makes
more sense for the default keymap to be the 44 key layout, as is implied by the
name.
Additionally keymaps for all other known layouts have been added:
KEYMAP - base layout
KEYMAP_ARROW - additional key in bottom right
KEYMAP_COMMAND - additional key in bottom left
KEYMAP_ARROW_COMMAND - combination of KEYMAP_ARROW and KEYMAP_COMMAND
* Add MIDI layer
* Respect brightness level on layer signalling
* Add hotkey in control layer for signalling state
* Update layout.png
* Remove image and replace it with imgur link
* Fix layer LED signalling in magicmonty keymap
* Include the breathing modes in layer signalling
* Reverts mode to 1 as the other modes flicker
* Add Cursor keys on VIM positions and PAUSE to function layer
Jack Humbert
Andreas Lindhé
Ethan Madden
Art Ortenburger
rai-suta
Blake Dietz
skullY
Dario Giovannetti
npoirey
Fred Sundvik
Stick
Fredric Silberberg
Mathias Andersson
Erez Zukerman
Geoff Lane
David Dizon
Jon Nall
Brandon Height
Kaleb Elwert
root
Jonas Rogers
Jonas
jprmesh
Jonas
Daniel Shields
Dylan Khor
Dylan Khor
Martin Gondermann
Ethan Madden
Ante Laurijssen
binaryplease
Nic Aitch
chilifries
Adam Bell
Danny Nguyen
Alfrheim
Jitae Kim
Fredric Silberberg
jpetermans
dbroqua
Nick Choi
Nick Choi