* Ensure setPinInput actually sets input high-z
* Fixed _PIN_ADDRESS Macro arguments
as recommended by vomindoraan
* Fixed instances of setInput to use new behavour
* Changed kmac matrix to use input with pullups
* Update keyboards/gh60/revc/revc.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fixed input state for unselect_rows
* fixed merge conflict
* Updated all instances of older uses of setPinInput()
* Fixed naming mistake
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Add VIA support to mxss and general cleanup
* Add support for RGB test for FLEDs
* Add LAYOUT_all to allow for more configuration
* Remove blank layers
* Updated readme
* Improve use of EEPROM
* Credit where its due
* Use the latest iteration of rgblight code
* Keep the RGB timer running if the front LED is in RGB mode
* Fix RGB breathing animation
* Better supported RGB animation
Only thing not working is alternating, but that's not too important
* Abstract front LED handlers from main kb code
* Add support for indicator LED color changing
* Remove debug statement
* Persist indicator LED colors
* Mark custom sections in rgblight.c
* Light commenting
* Fix up keymaps
* Add/update comments
* Remove bloat from default hex
* Tidy a stray tab
* Out with the old, in with the new
* Out with the old, in with the new
* Add LAYER_STATE_8BIT for VIA keymap
* Added KidBrazil custom keymap for CRKBD
-Custom Font
-Custom OLED output
* Added missing readme
* Oled Timeout Update for KidBrazil Keymap (#1)
* Setup Oled timeout based on simple timer
* Cleaned up comments and added timeout for LEDs
* Fixed some small errors
* Updated oled timout with matrix scan
* Updated oled timout with matrix scan
* Update withou eeprom
* Update timer code
* Use process user instead of keymap
* Added ifdef to protect oledtimer
* Updated with half timeout state for logo
* Removed middle tier timer
* Final cleanup of unused files
* Updated code as per suggestions & requests
* Second round of revisions
* Updated keymap to better handle LED timeout
- Added boolean to hold LED state
- Added init function to set rgb to known state
- Modified RGB_TOG to work with noeeprom commands
* Finished adding the timeout for OLED and testing on CRKBD
* Updated documentation
* fixed the timeout logic so it works as intended
* Added initial limits to color settings
* Added layer reset as part of the iddle timeout process
* Split Keymap into more manageable files
* Finalizing RGB Layer status on CRKBD
- Refactored OLED timeout to deal only with oled
- If user remains iddle on game layer for too long it will switch to
default
- LED / OLED iddle working
- Minor changes to _SYM layer
- Removed some rgb controls from keyboard due to layer dependent RGB
colors
* Update keyboards/crkbd/keymaps/kidbrazil/keymap.c
Used suggestion from Drashna to replace EEPROM_RESET with shorter version.
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/kidbrazil/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Implemented drashna's comment
Co-authored-by: Drashna Jaelre <drashna@live.com>
* fix audio enable repetition
* remove RGB LED support as this board has no RGB LB LEDs
* use pragma once
* this board has no backlight support
* enable COMMAND_ENABLE
* comment cleanups
* setting bootmagic to lite as the first board thathat has this PCB has a solid bottom. If someone forgets to put in a RESET key on their keymap, they are not going to have fun resetting the board
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* convert the palset and palclear routines to setpinoutput and writepinlow
* remove scankb
* restore original guards instead of pragma once
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Swap two cols to fix skog lite
* Fix readme
* Suggested formatting
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* both backspace and left shift matrix positions off by one
* update the led_update routine
* update readme
* Update keyboards/gray_studio/think65/solder/solder.c
* Add DZ60 to VIA
* Changed vendor id from 'KF' to 'DZ'
* Capitalize hex
* Fix Via_layout_options size setting
* Update keyboards/dz60/keymaps/via/rules.mk
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* WIP do not merge
* first pass at custom preonic layout
* add auto shift and reset via leader key
* Update readme
* update copyright notice
* formatting changes
* fix: use MO instead of process_record_user
* added backslash and moved grave position
* remove extraneous 'j' characer in NUMPAD template
* update template formatting
* remove process_record_user
* swap "!" with "@"
* fix readme formatting
* update readme layout image
* Add mx5160 keyboard
* Make necessary changes for merging
rules.mk cleanup, QMK's built in alias for KC_TRNS and change readme blurb
* Add info.json as well
* Update readme, info.json
* Change layout name, update led function
* Fix info.json
* Update rules.mk
* Remove custom backlight code for PS2AVRGB boards
* Remove custom driver setting
* BACKLIGHT_BREATHING goes in config.h, not here
* Don't need to include backlight.c again here either
* Turn on backlight for Canoe
* Disable console on a few boards due to oversize
* Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards
* Define diode direction for failing boards
* Matching parentheses
* Put onekey diode directions in top level config
* Initial commit
* Modified keymap and updated readme.
* fixed numbering in readme
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Made requested changes in PR.
* Rename README.md to readme.md
* swapped media control keys
* updated right alt key to apply shift key for emacs
* updated R_Alt to remove shift
* Updated readme
* add layout 2 and rename existing folder to layout 4
- renamed existing folder with directional layout to layout 4
- udpated existing readme
- Added layout_60_2
* update flash script per pull request review
* Added keymap profile to space65
- This keymap profile is for MacOS with VIM key bindings
- See readme for more information
* Update keyboards/gray_studio/space65/keymaps/billiams/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/gray_studio/space65/keymaps/billiams/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/gray_studio/space65/keymaps/billiams/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/gray_studio/space65/keymaps/billiams/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/gray_studio/space65/keymaps/billiams/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* remove unnecessary code from keymap
* updated keys and cleaned up readme
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
On the v1.2 PCB the slave half leds go in reverse order compared to the master half.
With this change, the leds are all in order from left to right, so animations like
Knight Rider look like you'd expect.
* ISO UK layout for Graystudio Space65
* Quick line on how to build it in the readme
* Update ASCII art layout guide to match reality
* Whoops, space is actually K47, not K46
* Rename to 65_iso_blocker and remove uk designation
* RGB config overhaul
Changing RGB config from setrgb to sethsv, trying out different color values.
* Merged changes
* Various changes and a couple additions
Added Git Layer with git macros for most operations and LED config to show the macro keys on layer. Activated with FN+3.
Added VIM Layer, this is a normal keycode layer with no macros for now but it has LED config that highlights the navigation and edit keys in VIM.
Added a sticky CTRL and sticky SHIFT layers. I have no idea why I did this actually, it's mildly useful but oneshot and tapdance would be better, will be removed in later commit.
Changed the LED config from setrgb to sethsv and the key by key LED config to array.
Some code improvements in process_record_user.
Better way to manage string macros using char array. Inspired by drashna's secret macros.
* Various keymap changes and added documentation
Updated massdrop/ctrl endgame keymap:
Added layers for git and vim.
Better LED config method, using ledmap, similar to what's used in many other keymaps.
Improved process_record_user() mainly with reduced conditionals.
Cleaned things up in the header and config.
Added pretty much all qmk feature headers to rules and config, commented out to be enabled if desired. Firmware size should be considered.
Not many features added in this commit. Shifting for a while to work on implementing raw hid for the keyboard and expanding qmk terminal.
Added documentation.md for massdrop/ctrl at keyboard level to house all related information for future use.
Added documentation for raw hid in docs, added the doc to feature index. Need some review for this documentation and suggested additions/changes.
* Some fixes
Fixed keymap documentation to include changes.
Removed useless double tap keys and simplified layer maps.
* Fixed error in keymap
* Removed documentation changes. Will present in another PR
* Update keyboards/massdrop/ctrl/DOCUMENTATION.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update DOCUMENTATION.md
* Update keymap.c
fixed mouse layout incomplete arrow cluster
* Update keyboards/massdrop/ctrl/keymaps/endgame/keymap.c
Fixed Git layer led config
Co-Authored-By: totolouis <totolouis@users.noreply.github.com>
* Update DOCUMENTATION.md
Remove raw hid details
* Update rules.mk
Remove useless stuff
* fixed malformed led map causing compile fail, indentation fixes
* Update keyboards/massdrop/ctrl/keymaps/endgame/config.h
switch from TG_NKRO to NK_TOGG
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keymap.c
Switching from TG_NKRO to NK_TOGG
* Added yakuake layout
* Update keyboards/massdrop/ctrl/keymaps/endgame/keymap.c
Change biton32(layer_state) to get_highest_layer()
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keymap.c
Change from biton32 to get_highest_layer
* Fixed custom LED not toggling off
Co-authored-by: fauxpark <fauxpark@gmail.com>
Co-authored-by: totolouis <totolouis@users.noreply.github.com>
* Initial commit of HHKB layout.
* Moved keymap to the correct location.
This keymap is for a hasu alt controller-equipped HHKB, so the keymap was in the wrong place.
Added comments to the keymap.
* Add files via upload
* Rename keyboards/kbdfans/kbd67/rev2/keymaps/keymap.c to keyboards/kbdfans/kbd67/rev2/keymaps/adi/keymap.c
* Rename keyboards/kbdfans/kbd67/rev2/keymaps/readme.md to keyboards/kbdfans/kbd67/rev2/keymaps/adi/readme.md
* Update readme.md
* Update readme.md
* Update keyboards/kbdfans/kbd67/rev2/keymaps/adi/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kbdfans/kbd67/rev2/keymaps/adi/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kbdfans/kbd67/rev2/keymaps/adi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Tidy up dztech keyboard.c/h and readmes
* Use new lock LED function
* Undo changes to led flags
* Fix make examples
* Update readmes some more
* Clarify filetypes
* Format as list
* Add minitomic keyboard
* Small change to readme
* Make changes necessary for merging
Remove extra comma in info.json, move caps lock led status from keymap to keyboard, removes unused keys on full space bar layout, cleans up rules.mk and update readme blurb.
* Update readme.md
* Update led function, fix spacing and remove custom keycodes
Removes the custom keycodes in default keymap, fixes spacing in keymap and minitomic.c and puts the new led function in as well
* Keyboard: add treeadstone48
* rename layout defines
* Use of pragma once
* move common include code
* fixed info.json
* change keymap layout from kc to normal
* fix alpha revision keymap
* fixed info.json
* remove USE_Link_Time_Optimization
* I re-created treastone48 keyboard firmware from ./util/new_keyboard.sh
After that I use common OLED_DRIVER, RGB_LIGHT and SPLIT_KEYBOARD options.
And then check all keymap.
* Modified by PR review
* Basic functionality to synchronize the strings and enums using C preprocessor macros.
* Updated all the custom convenience macros to work.
* Removed some duplicate update_tri_layer calls.
* Simplified the convenience accelerator macros for synchronizing enums and strings by removing the short enum names.
* Updated the CUSTOM_MACROS macro to use SS_LCTL instead of SS_LCTRL.
* Fixed a bug where the right side of the convenience layer in the Iris keymap was incorrectly listed twice.
* Removed the tenkey from the convenience layer. Added Windows 10 virtual desktop shortcuts to the convenience layer.
* Fixed a bug where the macro range was not set correctly.
* Added sigil values for the keycode enum so that additions to the sync macros will not require changes to the process_record_user ranges.
* Hacked send_string_P to work with ChibiOS boards.
* Switched to using I2C for the Iris keyboard.
* Finished a comment.
* Updated comments to explain that for non-AVR MCUs, the PROGMEM macro doesn't do anything.
* Updated the synchronization macros to use the more descriptive "NAME" instead of "CALL". Moved the Control-Alt-Delete chord macro to the synchronization macro.
* Simplified the custom macros by consolidating the macros into a context change macro instead of using alt-tab and minimize macros.
* Fixed a formatting issue where several tabs were used instead of 4 spaces.
* Added more comments to explain the synchronization macros.
* Simplified the PARAMS macro, since any parameters could be passed with a space by the declarer instead.
* Consolidated the synchronization macros into a single list. Simplified the synchronization mechanism.
* Removed the overloading macro, since it is no longer needed.
* Updated the convenience layer comments to reflect the changes made.
* Renamed the git_macros pointer table to custom_macros, since it no longer solely consists of git macros.
* Clarified that the send_string_P function's use of pgm_read_byte is different for AVR and non-AVR compilation targets.
* hope this works
* Some new things crept in
* remove nonsense config file
* spacing fix
* more spacing
* quick revert of mysterious file
* file revert take two
* take three
* take four
* deleted unneeded lines
* brought back not-unneeded line
* whitespace delete
Updates the example make commands in the Levinson readme to
keebio/levinson/... instead of levinson/...
Also updated the example to rev3 (the current version of the board)
* Add: RGB underglow support using SPI to SteamVan and CO60
* Update: Switch to QMK's baclight implementation for CO60 and SteamVan
* Fix: Remove now unnecessary backlighting code from keyboard files
* initial commit from script
* edit all generated files with my name and some basic notes
* implement RGB Matrix support
* cleanups, file removals, and readme edits
* Update keyboards/bm60hsrgb/config.h
* rename to bm60rgb
* update included library and info.json keyboard name
* Update keyboards/bm60rgb/keymaps/default/readme.md
This code is timing sensitive and seems to break with LTO enabled (at
least on avr-gcc 8.3.0... it worked on older gcc versions).
This is the same workaround as #7558 applied for the Helix.
* Adi's DZ65RGB layout
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Rename layers.JSON to layers.json
* Update readme.md
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Delete layers.json
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Rename keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/readme.md to keyboards/dztech/dz65rgb/keymaps/adi/readme.md
* Rename keyboards/dztech/dz65rgb/keymaps/adi_dz65rgb_ansi/keymap.c to keyboards/dztech/dz65rgb/keymaps/adi/keymap.c
Co-authored-by: fauxpark <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Nk65 Refractor
- Changed Via keymap to via instead of default_via
- Moved Caps/Layer indicator code outside of wilba_tech rgb. This is so they can more easily be modified
* Update keyboards/nk65/nk65.c
* added ymdk ymd09 keyboard
* lowercase github username
* change rgb keymap to make more sense
* fixed number of LEDs
* remove configuration for non-existant backlight
* use official template and change file permissions
* disable unnecessary nkro
* Apply suggestions from code review
Co-Authored-By: Joel Challis <git@zvecr.com>
* with easy reset via bootmagic lite, remove RESET from layout
Co-authored-by: Joel Challis <git@zvecr.com>
* make vendor folder for idb keyboards
* set default debounce to eager_pk, clean up vendor/product ID
* refactoring for VIA
* made changes to support latest release of VIA, added default keymap that's in line with the most popular configuration
* Made suggested formatting changes
* rebase to get rid of lufa files
* removed idb_60.json that's only meant for via itself
* Update keyboards/idb/idb_60/keymaps/via/rules.mk
* Update keyboards/idb/idb_60/readme.md
* Update keyboards/idb/idb_60/readme.md
* Update keyboards/idb/idb_60/readme.md
* Update keyboards/idb/idb_60/rules.mk
* Update keyboards/idb/idb_60/config.h
* Update keyboards/idb/idb_60/readme.md
* made suggested formatting changes
* fixing lufa
* Update keyboards/idb/idb_60/rules.mk
* Update keyboards/idb/idb_60/config.h
* made suggested changes
* refactor keyboards using ST_STM32F072B_DISCOVERY to use 'MCU = STM32F072'
* refactor keyboards using GENERIC_STM32_F042X6 to use 'MCU = STM32F042'
* refactor keyboards using GENERIC_STM32_F103 to use 'MCU = STM32F103'
* add readme to each of the mkii versions
* update the most parent of kbd67 readmes to have history of the new versions
* fix up the parent readme for the two types of boards
* Update keyboards/kbdfans/kbd67/mkiirgb/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kbdfans/kbd67/mkiirgb/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kbdfans/kbd67/mkiirgb/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kbdfans/kbd67/mkiirgb/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* fixup readmes
Co-authored-by: fauxpark <fauxpark@gmail.com>
* fixed hhkb keymap issue and added allleds configuration
* fixed layout mismatch
* add more matrix control
* remove redundent define in rules.mk
* turn NKRO on
* remove allled macro, adding readme in allleds mode, add via support
* add two more layers for via
* update readme file
* Update keyboards/exclusive/e6_rgb/keymaps/allleds/readme
* Update keyboards/exclusive/e6_rgb/keymaps/allleds/readme.md
* add VIA support to Kyuu
* update keymap file to follow indenting guidelines
* add missing newline to rules.mk
* remove unnecessary backslashes and reindent default keymap
* Added KidBrazil custom keymap for CRKBD
-Custom Font
-Custom OLED output
* Added missing readme
* Oled Timeout Update for KidBrazil Keymap (#1)
* Setup Oled timeout based on simple timer
* Cleaned up comments and added timeout for LEDs
* Fixed some small errors
* Updated oled timout with matrix scan
* Updated oled timout with matrix scan
* Update withou eeprom
* Update timer code
* Use process user instead of keymap
* Added ifdef to protect oledtimer
* Updated with half timeout state for logo
* Removed middle tier timer
* Final cleanup of unused files
* Updated code as per suggestions & requests
* Second round of revisions
* Updated keymap to better handle LED timeout
- Added boolean to hold LED state
- Added init function to set rgb to known state
- Modified RGB_TOG to work with noeeprom commands
* Finished adding the timeout for OLED and testing on CRKBD
* Updated documentation
* fixed the timeout logic so it works as intended
* Update keyboards/crkbd/keymaps/kidbrazil/README.md
* fix ANSI layout macro reference
* update ISO layout macro and enable 65_iso community layout support
- rename to LAYOUT_65_iso (with LAYOUT_iso alias for backwards compatibility)
- rename position k2c to k1d (electrical position)
* rules.mk templating
* tada68.h: use #pragma once include guard
* config.h: use #pragma once include guard
* make product id unique
* update info.json
* update readme
* cleanup default keymap
- keycode alignment
- layout macro reference
- four-space indent
* remove matrix_*_user functions from tada68.h
* Left-right gradient.
* Update the comment to match the new functionality.
* CPP does integer division so this round is not necessary.
* The x-range is actually 224, update comment and use bit-shifting again.
* Update docs with gradient left-right effect and associated "DISABLE" option.
* hope this works
* TF working with userspace
* rules for tf
* Fixed changed default files
* delete old keymap
* revert tf68 default to default
Co-authored-by: Akaash Suresh <casa.akaash@gmail.com>
* Add an 65_ansi community layout
- fix quoting because of comma in config.h
* Enable LAYOUT_65_ansi for tada68
* cleanups
* Update keyboards/tada68/tada68.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-authored-by: fauxpark <fauxpark@gmail.com>
* ifdef rgb stuff like a madman for RGB Coexistance
* Re-enable RGB Light on Planck
* fix RGB Coexistance issue
* Tweak feature settings for Ergodox EZ Glow
* Their powers combine, and I am Captain RGB
This one is for noroadsleft and yan.
* Limit brightness when both RGB features are enabled
* Change shutdown method
* Add RGB Coexistience stuff to keymap
* disable RGBLIGHT_SLEEP until a solution can be found
* Disable Unicode on the kyria
* Fix up Iris rev defines
* Fix up community layouts to compile properly
* Cleanup rgb stuff
* Merge ergodox keymaps
* Update CCCV macro to use tap_code16
* Enable Solenoid on C39
Because josh couldn't
* Enable RGB Light, not Matrix on rev6 keymap
* Only enable LTO on non-ARM boards
* Clean up Bootmagic OLED display
* Enable RGBLIGHT_SPLIT on kyria
Not that it does anything
* Add hotkey for discord
* Add support for Red Scarf I numberpads
* update info.json for configurator
* Update keyboards/redscarf_i/redscarf_i.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/redscarf_i/redscarf_i.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/redscarf_i/redscarf_i.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/redscarf_i/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/redscarf_i/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/keymaps/4x5_ortho/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/keymaps/4x5_ortho/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/keymaps/4x6_ortho/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/keymaps/4x6_ortho/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/redscarf_i/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/redscarf_i/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* rename keymaps, add default
* final touches! i think we're there
* remove .gitignore from keymaps directory
* remove unused custom keycodes from ortho_custom_4x5 keymap
* remove ortho_custom_5x4 keymap (identical to ortho_5x4 keymap)
* remove firmware size impacts from rules.mk
* change "MCU selection" to "MCU name" in rules.mk
* complete matrix array for LAYOUT_ortho_5x4 macro
Probably not needed, but I like when it's complete.
* add numpad layout macros
* correct info.json data
* update readme
Co-Authored-By: Ben Weakley <2173281+Defying@users.noreply.github.com>
* rename ortho keymaps to rows by columns per QMK convention
* rules.mk templating
* change uint32_t to layer_state_t per drashna
* use led_update_kb() per drashna
Co-authored-by: Ben Weakley <2173281+Defying@users.noreply.github.com>
Co-authored-by: fauxpark <fauxpark@gmail.com>
* correct the matrix pin for db63
* first correct layout
* adding RGB support for db63
* adding backlighting keycode
* enable back extension
* update readme for the bootloader
* correct the capslock pin
* update correct info.json and layout following suggestion
* editing contact
* Update keyboards/db/db63/README.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/db/db63/README.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Move some common matrix code to a common location
* Refactor some 'custom_matrix_helper' logic to use custom matrix lite
* Fix build for kinesis/stapelberg - abuse of vpath was picking up matrix.c from core when custom matrix was enabled
* Add validation for CUSTOM_MATRIX
* Added csc027 user folder and keymaps for both keebio/iris and planck
* Moved the git_macros variable out of the process_record_user function.
* Updated the usb_led code to use the new led_update_user instead of the led_set_user function.
* Update users/csc027/defines.h
Removed the "_______" macro definition in defines.h, since it has already been defined in QMK.
* Update users/csc027/defines.h
Removed the "XXXXXXX" macro definition in defines.h, since it has already been defined in QMK.
* Update users/csc027/csc027.c
Simplified several keyboard macro definitions in the csc027.c file by switching from SS_LCTRL to SS_LCTL in their definitions.
* Condensed both the planck and iris rules files to the minimal set of declarations.
* VIA Refactor
* Remove old code
* review changes
* review changes
* Fix cannonkeys/satisfaction75/prototype:via build
* Add via.h to quantum.h
* Move backlight init to after backlight config load
* Merge branch 'master' into via_refactor_pr
* Update user's rules.mk to new way of enabling VIA
* Added id_switch_matrix_state
* Review changes
* Added my UT47.2 Swedish layout with tap dance function.
* Move tap dance over to user space
* Removed config_common from config file
* Changes to workspace with new support for code16. Tested ok
* Swedish support
* Added code16 version of tapdance to userprofile.
* Created 4th layer and updated readme file. Removed ascii rep of layout.
* Tabdance updates
* Removed duplicated RGB keys.
* Added hvp minivan config
* Fixed tapdance key maps
* Added Planck 1 space base hvp layout
* Start of hvp xd75 layout. Way to many keys
* Added working config ink test for atreus62
* fixed smaller layout changes
* Updated tap dance with option 5
* Added better thump keys
* Created lets split layout
* Removed not used modes
* Updated to correct url
* Readme file
* Atreus62 readme
* Cleanup of keymap file
* Added tap dance
* Fixed missed adjustment
* Added hvp planck setup
* Update ascii
* will this work better?
* removed ascii
* Planck 1 space setup
* Fixed ascii local
* Added Corne setup
* Changes for lets split
* Atreus62 config
* Added Lily58
* Setup corne
* Setup planck
* Updated lets split
* UT47 setup
* Setup a The Vanboard.
* Alt Ctrl
* #define D_NAVI MT(MOD_LCTL | MOD_LSFT, KC_D)
* Fix D_NAVI & plank midi
* Fixed PR comments
* Added pragma
* Moved def to user space
* Removed not used endif
* Added def to users space
* Added rules to van
* Removed not used part of config
* Removed not used layout
* Removed not needed comments
* Remove not needed keymap_config_t
* Removed broken ascii from readme files and removed not needed rules
* Added spaces to readme file
* Removed xd75 from branch
* Aranck now supports community MIT layouts, also minor optimisations done
* Update keyboards/handwired/aranck/keymaps/turkishish/readme.md
* Update keyboards/handwired/aranck/readme.md
* Use White channel on RGBW LEDs
Co-authored-by: kwerdenker <sebastian.spindler@gmail.com>
* Manually apply white channel to array
* Move where convert_rgb_to_rgbw is called
* Fix type for rgbw led struct
* Add changes to Ergodox EZ
can revert if deemed necessary
* Revert "Add changes to Ergodox EZ"
This reverts commit aa44db198d40d758ca10470eb94615513592d1dd.
* Revert "Fix type for rgbw led struct"
This reverts commit c5c744cba040201cc0d124400773cf13f8a2cf22.
* Revert "Move where convert_rgb_to_rgbw is called"
This reverts commit cd7f17caf6dd30731c54b3be54490fe4519444f9.
* Revert changes and fix up functions
* Enable white channel for Ergodox EZ as well
* Only run conversion of rgblight is enabled
Co-authored-by: kwerdenker <sebastian.spindler@gmail.com>
* add new keyboard
* update config to use
* confirm config that works
* fix the keymaps and what not
* default keymap update
* update readme
* update and remove unncessary files
* update IDs and remove unused definitions
* update readme
* add new keyboard
* update config to use
* confirm config that works
* fix the keymaps and what not
* default keymap update
* update readme
* update and remove unncessary files
* update IDs and remove unused definitions
* update readme
* remove unused stuff
* update default keymap and add my own with layer indicator LEDs
* update README
* add crd's layout as part of the default as well
* some specific space fixes
* update readme for flashing
* remove code and use mcu selection instead. yay!
* remove vlk from default and enable velocikeys in madhatter
* remove BL_ from default
* and remove BL_ from madhatter as well
* Update keyboards/cheshire/curiosity/keymaps/crd/keymap.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-authored-by: Khader Syed <35927972+chapter63@users.noreply.github.com>
Co-authored-by: fauxpark <fauxpark@gmail.com>
* add indicator lighting support thanks to Keebology tracing
* set the correct number of underglow LEDs
* add comments and skeletal structure for layer indicator LEDs
* add backlight areas pins
* update readme
* we can't turn leds on based on zones, so we use multiple backlight pin support instead to turn them ALL on and control them.
* add comments to backlight setting
* make a more useful default keymap that can also be used for testing
* add duck orion to list
* add indicator led support
* update readme
* Update keyboards/duck/orion/v3/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/duck/orion/v3/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/duck/orion/v3/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/duck/orion/v3/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/duck/orion/v3/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/duck/orion/v3/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* add the appropriate header files
* fix indent so Drashna will not die
* Update keyboards/duck/orion/v3/v3.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/duck/orion/v3/keymaps/default/keymap.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/duck/orion/v3/keymaps/default/keymap.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/duck/orion/v3/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/duck/orion/v3/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/duck/orion/v3/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Fix key object order
info.json: Reorder the key objects into the order required by kyria.h
* linting
info.json: fix indent depth and trailing whitespaces
* Minimize visual footprint
info.json: Subtract 0.25 from each Y value to minimize the keyboard dimensions when rendered
* Initial commit for K-Nunmpad
* Changed layoutname
Corrected the files according to drashnas suggestions.
* Some names have been changed
* Some code thats not been used has been removed
* Fixed rules.mk
When adding the commnity layout, tapdancing broke. This was fixed with
rules.mk was changed in the k-numpad and karlssn keymap.
* Cleanup according fauxpark
Cleaned up the readme.md and the rules.mk according to feedback from
fauxpark.
* Fix reversed col 11 and 12
- the two columns are reversed in the matrix
* Fix gui
* Fix reversed col 11 and 12
- the two columns are reversed in the matrix
* Added userspace for d4mation. Included their keymap for the Atreus62
* Do not assign layer numbers manually
* Remove some unneeded things per @drashna's recommendation
* Fix some single line comments I missed
* Update unicode macros to use send_unicode_hex_string() instead of process_unicode()
* OBetter check for Unicode Enabled. Moved some checks into macros.c
* Use eeconfig_init_user() to set default unicode input mode
* ISO layout for the soldered Think6.5 PCB
* Think6.5 personal layout readme
* Add personal Think6.5 user map with LED group cycling
* Add default case to process_record_user
* Make the ASCII diagram match the layer properly
* Relocate KC_NUHS to the home row for consistency
* Add LAYOUT_65_iso_badge to info.json
* Wire up the badge LEDs as capslock LEDs
* Remove unused keymap variable
* Added KidBrazil custom keymap for CRKBD
-Custom Font
-Custom OLED output
* Added missing readme
* Oled Timeout Update for KidBrazil Keymap (#1)
* Setup Oled timeout based on simple timer
* Cleaned up comments and added timeout for LEDs
* Fixed some small errors
* Updated oled timout with matrix scan
* Updated oled timout with matrix scan
* Update withou eeprom
* Update timer code
* Use process user instead of keymap
* Added ifdef to protect oledtimer
* Updated with half timeout state for logo
* Removed middle tier timer
* Final cleanup of unused files
* Updated code as per suggestions & requests
* Second round of revisions
* ported J80 to QMK
* added default ISO layout
* removed optional override functions
* set bootmagic to lite
* removed comment
* added tkl_ansi and tkl_iso layouts
* updated vendor and device name
* set ANSI layout as default and split iso to separate folder
* removed empty file
* Update keyboards/J80/info.json
Added comma
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/J80/keymaps/default/keymap.c
Removed backslash
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/J80/keymaps/default/keymap.c
Removed backslash.
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* removed comments and backslash, fixed JSON formatting
* Rename J80.h to j80.h
* Rename keyboards/J80 to keyboards/j80
* renamed folder to lowercase
* added key definition for reset key
* added define for KC_NO to underscores
* Added backlight and lock LED support
* Fixed BACKLIGHT_PIN
* Fixed typo
* Added define for bootmagic lite and description in readme
* Update keyboards/j80/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/j80/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/j80/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/j80/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/j80/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/j80/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/j80/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/j80/j80.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/j80/j80.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/j80/keymaps/default/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Added full right shift layouts
* Move rgb keycode logic to process_keycode
* Fixes for rgb matrix
* Fixes for mxss
* Fix inc/dec logic, add comments
* Fix return RAINBOW_SWIRL logic
* stop external use of rgb helper functions
* merge fix
* Fix 'defined but not used' when all animations are disabled
* Move kwerdenker's personal keymap from RGB
Talked to Maartenwut about making RGB an actual template instead of
kwerdenker's keymap. Free'd up B7 so it can be used for audio in
agreement with MW. He's considering adding a speaker footprint to next
rev of plain60, and only B7 can be used with Audio. RGB uses bitbang
driver so it doesn't really make any difference if it's pin B0.
- RGB should be a template for other people to modify, not a personal
keymap
- change default pin to B0 to free up B7 for audio use
- rename RGB to kwerdenker
* Add RGB keycodes to FN layer
* don't use uppercase in keymap names
- doesn't work properly on MacOS or Windows
* Add an audio specific keymap
* Enum instead of define
* Suggested change to keymap
- maintain compatibility with old keymap
* Change plain60 to bootmagic lite
- it's easier to reset and maintain a keyboard with lite
- remove obsolete size comments
* Add RESET on a layer to default keymap
* Use _FN
* Maintain compatibility with keymap
* Fix thinko
* allow main functions to be overridden
* update keymap to toggle keys and cleanup a bit
* allow main functions to be overridden
* update keymap to toggle keys and cleanup a bit
* get them lights working with the new setup
* disable console on my keymap, cause ARM and Linux, for now
* update keymap
* add home and end to the navigation
* thought this was redundant - update keyboards/projectkb/alice/alice.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* adding my zen 1 keymap
updated layers and custom keycodes
* added slack + paste
defined custom keycode S_H_P and added to layer 3
* added custom keycodes
defined and inserted T_H_B and T_H_T
* enabled tap dance
adjusted rules to include tap dance
* tap dance enumeration and timing
added a TD key to send space on press and . on double tap. added tapping term to set tap detection time.
* added custom keycode
added E_SS to print string
* added mouskey + enum keycode
added in mousekey to rules. added custom code DC_C to double click and copy.
* updated custom keycode string
added a space into the output string for S_H_P
* removed colemak layer
colemak commented out, started adjusting MOs
* added 1 key copy paste
used from https://github.com/qmk/qmk_firmware/blob/master/users/drashna/process_records.c#L116-L130
* updated rgb and copyright line
* updated tapcode KC_CCCV
* Update keyboards/rgbkb/zen/rev1/keymaps/starcaller_v1.1/config.h
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* updated keymap folder name to my username
* I don't know if this is how my keyboard is laid out or not
* testing, still broken
* name change
* I think this is the layout I will try to use to start
* it compiles!
* added norman layout!
* media keys
* Moved backlight functions to KEYB
Moved Delete off of Backspace and to the < key
* more changes to layout, move Norman to 1 so it was moddable by FCTN
* swapped volume and media, I use volume a lot more than media
* Eh, it's still all in flux.
* I don't want the entire function layer full of dead keys, after all...
* moves escape to the caps lock key and caps lock to the functions layer
* update my readme for posterity
* Updates bonfire dz60 for better escape control
* WIP commit -- this is not working yet
* updates keymap for GAME layer
adds info to README
adds visual keyboard layout map in json and jpg for reference
* updates readme for visual keymap insertion
* removes my layout from the parent folder and keeps it localized
* updates the C code to be more readable
* finished the HELD_ESCAPE code
* finishes v6.1.0
* updates layout names to match repo code style per @mechmerlin
Apply suggestions from code review
* updates to code style per suggestions by @mechmerlin
* Update global-functions.c
updates some personal documentation
* updates hold time for escape on gaming layer
* updates several aspects of the code based on PR requests
* moves a variable
* Fix ansi_blocker layout
Reposition unused keycode
* Update keymap matrix hex code
Use match hex code so number matches matrix position
Update spacing
* Realign keymap to match physical hardware
* working on keymap and files for the navi10
* fixing and modifying tap dance keys and layers
* cleanup, and adding my separate keymap
* edited and simplified the default keymap
* cleaned up files and added support for future rev2 board
* readme edits
* moved rev0 specific keymap to it's own folder
* added revision data to the config files
* added DEFAULT_FOLDER
* added note on compiling for a specific revision
* documentation and readme edits
* moved keymaps around and cleaned up
* added photo
* formatting and cleanup
* fixing whitespace
* moving the tap dance enable to keymap folders
* Formatting of Contra readme.
* Initial version of my custom keymap
* Move TODOs to readme
* Add comment
* Nuke Plover layer
* Port changes to other layers
* Finished work on my own layout for now
* Add layout image
* Processed comments from review
* Set proper AVR part for USBasp avrdude flashing
* Remove `PROGRAM_CMD` stuff from rules.mk as they should not be needed anymore
* Missed the Plaid readme
* Remove PROGRAM_CMD from Mysterium
* Display logo for caps lock indication on crkbd using old OLED driver
* Add emacs read-only mode file variable to generated files
* use LTO_ENABLE instead of EXTRAFLAGS
This enables the same option, and disables action_macros, and action_functions, both of which seem to break when LTO is enabled. And this is a lot simpler to use.
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Added my Dactyl Manuform layout
* Added my Dactyl Manuform layout
* finalized key layout, added reset code, no LED yet
* finalized key layout, added reset code, no LED yet
* enabled RGB backlight
* enabled RGB backlight
* enabled RGB backlight
* supporting split rgb
* supporting split rgb
* supporting split rgb
* added media controls
* allowing ctrl/command to fallthrough from mouse layer so we can ctrl scroll to zoom in/out
* addressed PR comments, and make a couple last minute adjustments to the layout, to add in the Forwards Delete keycode
* decreased brightness even more
* massdrop ctrl endgame keymap first commit
* massdrop ctrl endgame keymap update
Added double dance functions to toggle mouse layer while keeping LGUI key functionality.
Added led config and related functionality.
Added RGB indicators for effective keys on layers.
Fixed RGB timeout ignoring user set LED flags.
At current state, layer RGB indicators ignore RGB brightness value, will add toggle key later to toggle between current keyboard brightness and max brightness as it's nice to have the indicator RGB at max brightness but still too bright at times.
* updated documentation and added RGB indicator for ctrl and shift in function layer
* Update keyboards/massdrop/ctrl/keymaps/endgame/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/massdrop/ctrl/keymaps/endgame/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Various fixes and changes.
Removed backslashed at end of layouts, better looking.
Changed layout names from macro definitions to enum.
Replaced MOD_BIT with MOD_MASK macros.
* add RGBRST key into helix/pico:default keymap ADJUST layer
* update helix/rev2:default keymap's OLED display contents
* add RGBRST key to HELIX_ROWS == 4 ADJUST layer
* add CAPS key to RAISE, LOWER layer
* add layer status display on slave side oled
* add RGB LED status display on both side oled
* save stack memory size
* Added tr60w configurations.
I based these files on the fox-lab/qmk_firmware repository.
After checking both licenses, which are identical, I added those
files into this feature branch.
For transparency reasons I'll add the url to the fox-lab repository.
https://github.com/fox-lab/qmk_firmware
* Using #pragma once in config.h.
* Removed '#define CCONFIG_H' from config.h.
* Changed PRODUCT_ID to '0x4140'.
* Renamed setting to 'DEBOUNCE'.
* Removed key combination, due to already default implementation.
* Removed 'PREVENT_STUCK_MODIFIERS', defaulted by QMK.
* Removed not uneccessary '#endif' statement.
* Renamed include to 'QMK_KEYBOARD_H'.
* Changed keymap structure according to pull request suggestion.
* Removed 'void matrix_init_user(void)'.
* Removed 'void matrix_scan_user(void)'.
* Removed 'bool process_record_user(...)'.
* Removed non-standard configuration in favor for 'led_update_kb'.
* Using default setup based on 'MCU' setting.
* Replaced Build Option configuration with suggested information.
* Fixed include statements as requested.
* Changed 'KEYMAP' to suggestion.
* Removed obsolete '#endif' statement.
* Added readme.md file.
* Updated readme.md with further information.
* Reverted include statement, to check if this caused ci error.
* Revert "Reverted include statement."
This reverts commit ebd992dc01133169be38ae7201bb00b4d01cc737.
* Fixed wrong mapped key
* Fixed include as per suggestion.
* Replaced 'KC_TRNS' with '_______'for readability.
* Added personal keymap.c file.
* Updated the readme.md file according to template/avr/readme.md.
* Fixed Link to Image.
* Updated readme.md as per request.
* Updated rules.mk, as per suggestion.
Set 'BOOTMAGIC_ENABLE = lite'.
* fluorite keymaps
* Update config.h
* Update fluorite.c
I corrected the points that were pointed out.
* Update fluorite.h
I corrected the points that were pointed out.
* Update config.h
I corrected the points that were pointed out.
* Update keymap.c
I corrected the points that were pointed out.
* Update keyboards/fluorite/config.h
thanks!
* Update keyboards/fluorite/readme.md
thanks!
* Update keyboards/fluorite/rules.mk
thanks!
* Update keyboards/fluorite/rules.mk
thanks!
* Update keyboards/fluorite/rules.mk
thanks!
* Update keyboards/fluorite/rules.mk
thanks!
* Update keyboards/fluorite/rules.mk
thanks!
* Update keyboards/fluorite/readme.md
thanks!
* Update keyboards/fluorite/readme.md
thanks!
* Update keyboards/fluorite/rules.mk
thanks!
* Update keyboards/fluorite/rules.mk
thanks!
* Update keyboards/fluorite/rules.mk
thanks!
* Update keymap.c
I corrected the points that were pointed out.
* Update fluorite.c
I corrected the points that were pointed out.
* Update rules.mk
I corrected the points that were pointed out.
* Update keyboards/fluorite/rules.mk
Thanks!
* Update keyboards/fluorite/rules.mk
Thanks!
* Update keymap.c
I corrected the points that were pointed out.
* Update fluorite.h
I corrected the points that were pointed out.
* Update keymap.c
I corrected the points that were pointed out.
* Update keymap.c
I corrected the points.
c:165:68
XDXXXXX >> XXXXXXX
Reverted,because error log.
ADJUST,
* Update keymap.c
I corrected the points that were pointed out.
* Update readme.md
link added
* Update readme.md
photo link added
* Update readme.md
link Modify
* Update keyboards/fluorite/readme.md
Thanks!
* Update keyboards/fluorite/readme.md
Thanks!
* fixed noah info.json
* fixed iso keymap and adding default iso keymaps
* keymap cleanup
* verified through the qmk configurator preview mode
* modify encoding from utf-8 bom to urf-8
* replace home and end with cmd-left and cmd-right for iOS compatability
* tab left and right with cmd-shift-bracket instead of ctrl-tab for Blink compatability
* cmd-up and cmd-down instead of pg-up pg-down for blink shell compatability
* Revert "cmd-up and cmd-down instead of pg-up pg-down for blink shell compatability"
This reverts commit e976af9f11f77933f272edc22faf971445a65717.
* reorganised symbol layer
* update link in readme
* Community Layout support for KBD8X MK2
- add LAYOUT_tkl_ansi and LAYOUT_tkl_iso layout macros
- add default_tkl_iso keymap, using new layout macro
- rename ansi_625 keymap to default_tkl_ansi, using new layout macro
- change keymaps to four-space indent
- update info.json
- remove firmware size impacts from rules.mk
* remove empty functions
* rename the ANSI and ISO keymaps per fauxpark
* add new keyborad wm1
* 删除print信息
* add info.json and modified the default keymap.c
* add keyboard name and maintainer in info.json
* add readme.md file for new keyboard
* add default/keymap/readme.md
* modified the main readme file
* change keyboard name from wm1 to wm1_hotswap
* update readme
* update imgur link in readme
* update readme to add more pic and subtopic
* change wm1 keyboard pic to direct show up
* add copyright to config.h
* modified the info.json to change the label
* set the debug config to no in rule.mk
* rename wn1.c wm1.h to wm1_hotswap.c, wm1_hotswap.h
* fix spelling mistake
* update the rule.mk to new version
* fix the LED operation in wm1_hotswap.c
* delete the definition of kc_trns
* change layout to conform to electrical position
* delete backslashes in keymap.c
* update info.json according to the layout
* change the return of led_update_kb
* delete unused comments in rule.mk
* delete unused definition in wm1_hotswap.h
* add a if statement to support user override func
* fix comment in rules.mk
* Add left number pad layout to candybar keyboard
* successfully builds
* Rename new layout to LAYOUT_lefty and add corresponding LAYOUT_righty as alias for LAYOUT
* merge
* Add lefty keymap
* Add lefty layout to info.json
* Added LAYOUT_righty to info.json and corrected some misplaced braces
* Update keyboards/candybar/info.json
* removed redundant sections as suggested.
* added cans12er keyboard
* updated readme
Updated the readme to conform with the provided template from the qmk_firmware githubpage
* Update keyboards/cans12er/README.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Changed configuration
Changed the configuration based on the Change Request from PR #7455 made by github user noroadsleft
* f
* Allow overriding of all functions in wonderland.c
- needed for custom LED functions in keymap.c
* Example of layer indication via LEDs
optimize
* Use newer led_update_kb and led_update_user hooks
- these allow overriding without use of __attribute((weak))__
* Update led documentation a bit
- clarify some of the wording around how to use led_update_user
* Update led_update_user example
* Update audio example to be complete
* trailing spaces smh
* spaces
* spaces
* smh
* Less code is good
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Add three missing default layouts
* Add layout support to tragicforce68
* Not really 68%
* Fix dumb mistake
* Update info.json too
* Apply suggestions from code review
* Adds layout for DZ60rev2 plate B, options 4 and 10
* Use KC_TRANS for layer keys
* Format layer0 with visual key size layout
* Add RGB controls; add start description; add KC_LOCK
* Update comments on rules.mk for DZ60
* Gets keymap compiling
* Fix wiring for shift on row 3
* Hold a with other key to send Ctrl-A before other key
* Adds compile-time defined mac-compatability media keycodes
* Adds logic in place for capturing taps (w/ timeout)
* Add send_keys(...) which can send up to 64 nested keycodes
* Implement send_keys callable with n repeats
* Tweaks some of the keymap
* Add reset keycode; add disable to custom shortcuts
* Adds a special "off" layer where bonus mod goes to layer 0, every other key KC_NO
* Adjust timeout; mousekey settings
* Changes layout of Home,End,PgUp/Dn on the dedicated arrow keys L1/L2
* PoC on rgb lighted layer indication
* Refactors color table defines
* Adds logic for controlling layer lights
* Only change state on one side of the event lol
* Switch back to Tapping Toggle for layer 4
* Add custom config file for keyboard; TT and mousekey settings
* Code cleanup; starting to refactor special ctrl tapping keys functions
* Move defines and reak out functions
* Remove debugging light
* Adjust keymaps; add enter
* Adds a couple custom macros
* Add simplified version of keymap to help debug issues
* Adds basi numpad configuration for levinson keyboard half
* Use ANSI ctrl key as layer 1 for better one hand (`)
* Adapt to new 8bit hue from #5547; layer enum use everywhere
* Move custom code out to users/ space
* Flip col pins, move key assignments to "left hand"
* Update readme
* Implement placeholder macros
* Notes
* Reduce tapping time for SFT_T(/)
* Adds vim features; refactors things
* Adds fork of the vim features written by xton
* Use correct backspace keycode
* Add VIM_ESC
* Add "OFF" to the RGB/HSV definitions
* Clean up rules, use new "OFF" definition
* Add windows KC_CALCULATOR key to numpad
* Reformat layers with better guide; change layer names
* Add sleep key
* Change timeout delay
* Add a "code paste" which surrounds a ^V with ```
* Try removing shift tap on rshift /
* Update macros
* Update the "code paste" macro
* Update keymap with reset, calc, equals
* Update keyboards/dz60/keymaps/twschum_b_4_10_simple/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/dz60/keymaps/twschum_b_4_10/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update users/twschum/twschum.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update users/twschum/twschum.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Revert quantum/rgblight_list.h
* Better name for split space layout; rename KEYMAP->LAYOUT
* Rename KEYMAP->LAYOUT
* Use simpler :flash command
* Clean up layout files
* Use qmk's MOD_MASK_CTRL
* Sync lufa submodule
* Cleanup from noroadsleft's PR comments
* Modernize vim layer code
* Remove keymap_config extern from default keymaps
* Revert unicode
Apparently VSCode does not like unicode, I didn't actually edit these lines, so it must have been automatic... :(
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* add the dog keyboard
* set rgbled
* fix info.json and readme.md
* Update keyboards/thedogkeyboard/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/thedogkeyboard/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/thedogkeyboard/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/thedogkeyboard/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* update thedogkeyboard
* Add Kyria Keymap
* Enable all RGBLIGHT Animations for ARM and high capacity AVR
* Reduce GNUC version for __has_include
* Cleanup Ortho 4x12 Community layout
* Update Collide 39 keymap
* Cleanup Keymaps
* Enable full 30 LEDs for Ergodox
* Change EEPROM Load timing
* Use RGB Matrix on Planck Rev6
* Use correct keymap swap
* Enable everything for ARM
* Only enable rgb sleep on avr until crash is fixed
* Add additional Kyria keymap config
* Overhaul Kyria OLED display
* Improve kyria keymap based on usage
* Minor tweaks to rules
* Update OLED code to truncate properly
* Fix RGB Light layer indication
* Switch all of biton32 to get_highest_layer function
* Fix OLED Keylogger display
* Run qmk cformat over all of my user files
* Slight tweak to kyria based on usage
* Move around LALT_T config
* Add comments about base wrappers to keymaps
* Another cformat pass
* Temp fix for VUSB boards and NKRO
* Convert tabs to spaces in rules.mk files
* Only enable RGBLight if it's enabled
* Add Encoder Flip setting
* Update OLED font file
* my custom layout
* asd
* use qmk-dfu
* :)
* ganti keymap lagi
* my custom layout
* asd
* use qmk-dfu
* :)
* ganti keymap lagi
* my custom layout
* asd
* use qmk-dfu
* :)
* ganti keymap lagi
* Add handwired2x2 project, define pins for atmega328p in config_common.h
* Add USB IDs
* my custom KBD75 layout
* renaldi danang's numpad
* my redox keymap
* reynaldi danang's numpad
* asdasd
* ASH-1800
* added description and layer 1
* added requested changes from fauxpark
* forgot to include this
* USB descriptor parameter:
- assign product id
- assign description
edit formatting on readme.md
* update USB descriptor: change manufacturer
* review from fauxpark and noroadsleft
* remove extra files
* removed unnecessary comment
* minor cleanup
* [keymap] Add abnt2 format to gh60
* Fix typing errors
* Change key names to capitals
* Fix layout define
* Apply suggestions from code review
* Fix layout define again I used a k
* Remove layer variable
* Update keyboards/dz60/keymaps/default_abnt2/readme.md
* Make changes from noroadsleft
* Add Community Layout: 60_abnt2
Add a 60% version of the standard keyboard layout used in Brazil.
* Enable 60_abnt2 support for DZ60
* fix the indenting in the Community Layout keymap
* debug lint info.json
Because I need to debug this file.
* move ISO Enter to the proper location in sequence
* add key counts because I like having them
skullydazed
Mikkel Jeppesen
zvecr
Jumail Mundekkat
yiancar
Lucas Moreira
fauxpark
yohewi
James Young
Wilba
Xelus22
Akaash Suresh
Max Rumpf
Cable Car Designs
MechMerlin
Brett Inman
Rossman360
dsanchezseco
Dmitrijs Minajevs
Alfred Maler
Salicylic-acid3
clovervidia
Spaceman
Maarten Dekkers
Takuya Urakawa
M. de Verteuil
Nathan Gray
Hybrid65
Callum Oakley
Ben
Josh Hinnebusch
Xyverz
Rys Sommefeldt
Ahmed Elshafey
Sascha Grunert
Adi M
Koichi Katano
marksard
csc027
Michael Firmin
John M Daly
Jonathan Rascher
xyzz
Mike Rix Wolfe
AbstractKB
Daniel Shields
Patrick Fruh
Seth Barberee
pngu
bottilabo
yulei
Kenny Greulich
Perry Huynh
Jesse Leventhal
Rob Haswell
Robert Snyder
Karol Samborski
gtips
Juno Nguyen
Yan-Fa Li
Drashna Jaelre
Hung DO
Jason Thigpen
hineybush
ridingqwerty
Rossman360
Tom Saleeba
Legonut
Gergely Peidl
hvp
marhalloweenvt
William Chang
Jianfei Wang
Benjamin Smith
Arda Kılıçdağı
Lukas Klingsbo
Sid Carter
codecoffeecode
Martin Karlsson
Toshihiro Suzuki
XScorpion2
Ryan
ihotsuno
Eric Defore
x1
Nygel Lyndley
Øyvind Wilhelmsen
Dmitry Nosachev
Boy_314
randlor
Zach
starcalleramethyst
Noan Mousy
nrtkbb
moyi4681
kakunpc
Bart Riemens
Lukas Alexandre
Ethan Beyer
MudkipMao
Jason Nedell
Ethan Durrant
Takeshi ISHII
Alper Cugun
Manna Harbour
Eric Bunton
Danny
coseyfannitutti
squirrelsRduck
Jeong Arm
MakotoKurauchi
halvves
kevin-b-lockwood
Joule-Flow
Matt Valentine-House
skullY
John Helveston
QMK Bot
heliarmk
Stephen Tudor
Kemmel-Dev
Thomas Baart
Martin Kauppinen
yynmt
Rob Rogers
Can Baytok
Hilary B. Brenum
Tim Schumacher
trinity1561
ashpil
angelbirth
Erovia
くまお工房
Luiz Correia