I was unable to determine a specific author or copyright holder
for this icon, and listing every potential Wordpress copyright holder
in debian/copyright seems ridiculous.
I have benchmarked the pagename() call this avoids taking up to 2 seconds
for a loadindex in a large wiki. The total loadindex for that wiki was
6.46s, so this is a significant improvment.
Even on a smaller site, this reduces the refresh time from 1.69 to 1.52
seconds.
The only breakage risk here is that pagename() can change the page name
it calculates due to setup changes. But in the case of a setup change, the
whole site is rebuilt. So the cached page name is not used in that
case.
I *think* this is ok, at least it results in close to the same index being
saved as before. The difference is that plugins that have a pagestate of {}
have that recorded this way, while with the tight loop, the key for the
plugin in not copied in that case. I cannot see how this could matter.
The recent move of the post author to the author field is good, but with
it coming after the name of the feed, it is unlikely to be visible when
viewed in eg mutt. Move it to before the feed name.
Not sure if this is needed to avoid it trying to run an editor. Probably
there is never a controlling terminal and probably git notices and does
nothing. But I'm just copying what I have in git-annex assistant here.
(Although with a much worse git version comparion, that only really works due
to luck.)
I saw this happen with calendar, when it wanted to update a page, that
had a calendar on it, but the page had just been deleted. This caused
srcfile_stat to crash.
This seemed to be due to the pagetemplate hook calling prerender. I've
observed this making it take *minutes* for the signin page to be displayed.
ltracing ikiwiki showed it was matching pagespecs a lot.
It may be that this is still a speed pain point when rendering pages, not
just for CGI. So more work may be needed here.
Try to avoid a situation in which so many ikiwiki cgi wrapper programs are
running, all waiting on some long-running thing like a site rebuild, that
it prevents the web server from doing anything else. The current approach
only avoids this problem for GET requests; if multiple cgi's run GETs on a
site at the same time, one will display a "please wait" page for a
configurable number of seconds, which then redirects to retry. To enable
this protection, set cgi_overload_delay to the number of seconds to wait.
This is not enabled by default.
bestlink returns '' if no existing page matches a link. This propigated
through inline and other plugins, causing uninitialized value warnings, and
in some cases (when filecheck was enabled) making the whole directive fail.
Skipping the empty results fixes that, but this is papering over another
problem: If the missing page is later added, there is not dependency
information to know that the inline needs to be updated. Perhaps smcv will
fix that later.
strftime is a C function, it does not return decoded utf8.
Several places in ikiwiki manually decoded it, but at least two
forgot to.
Also, strftime might not return even encoded utf8, if LC_TIME is set
to a non-utf8 value. Went ahead and supported decoding whatever encoding
it uses.
The remaining direct calls to strftime() are all ones that first set
LC_TIME=C, in order to get times that are not for human display.
https://rt.cpan.org/Ticket/Display.html?id=74487
Gave up trying to support multiple YAML backends. The XS one requires ugly
manual encoding to get unicode right, and doesn't allow dumping yaml
fragments w/o the yaml header, but at least it doesn't randomly crash
on import like YAML::Mo has started to.
mdwn: Can use the discount markdown library, via the
Text::Markdown::Discount perl module.
This is preferred if available since it's the fastest currently supported
markdown library, speeding up markdown rendering by a factor of 40.
That is to say, when only rendering a lot of markdown, discount is 40x
faster. When building a ikiwiki site, ikiwiki's other overhead gets in the
way, but I still see significant speedups. Building the ikiwiki docwiki
dropped from 62 to 45 seconds, for example.
However, when multimarkdown is enabled, Text::Markdown::Multimarkdown is
still used.
While discount contains some nonstandard markdown extensions,
including tables and footnotes, AFAICS most of them are not
enabled by default in the perl bindings.
I consider sticking to non-extended markdown a desirable thing, since this
is probably not the last markdown engine. In particular, sundown is waiting
in the wings to get packaged and get a perl binding.
----
Reviewing all the showdown extensions, here are the ones that are enabled:
centered paragraphs:
->centered<-
image sizes: [dust mite](http://dust.mite =150x150)
<style>..</style> blocks are eaten. The perl binding does not provide
access to the gathered CSS. This is not legal html anyway, so unlikely
to cause breakage.
We had a weird problem where, after moving to a new, faster server,
"git push" would sometimes fail like this:
Unpacking objects: 100% (3/3), done.
fatal: The remote end hung up unexpectedly
fatal: The remote end hung up unexpectedly
What turned out to be going on was that git-receive-pack was dying due
to an uncaught SIGPIPE. The SIGPIPE occurred when it tried to write to
the pre-receive hook's stdin. The pre-receive hook, in this case, was
able to do all the checks it needed to do without the input, and so did
exit(0) without consuming it.
Apparently that causes a race. Most of the time, git forks the hook,
writes output to the hook, and then the hook runs, ignores it, and exits.
But sometimes, on our new faster server, git forked the hook, and it
ran, and exited, before git got around to writing to it, resulting in
the SIGPIPE.
write(7, "c9f98c67d70a1cfeba382ec27d87644a"..., 100) = -1 EPIPE (Broken
pipe)
--- SIGPIPE (Broken pipe) @ 0 (0) ---
I think git should ignore SIGPIPE when writing to hooks. Otherwise,
hooks may have to go out of their way to consume all input, and as I've
seen, the races when they fail to do this can lurk undiscovered.
I have written to the git mailing list about this.
As a workaround, consume all stdin before exiting.
Also, I let preview mode write real files, rather than using data: uri.
Which is ok these days, since ikiwiki tracks files created during
previewing, and cleans them up later.
In 875d550f12 I for some reason
made $page be changed when creating a discussion page, which
broke the link on the edit page. Changing page seems unnecessary,
so reverted that part of the change.
Involved dropping some checks for .svn which didn't add anything, since if
svn is enabled and you point it at a non-svn checkout, you get both pieces.
The tricky part is add and rename, in both cases the new file can be in
some subdirectory that is not added to svn.
For add, turns out svn has a --parents that will deal with this by adding
the intermediate directories to svn as well.
For rename though, --parents fails if the directories exist but are not
yet in svn -- which is exactly the case, since ikiwiki makes them
by calling prep_writefile. So instead, svn add the parent directory,
recursively.
tldr; svn made a reasonable change in dropping the .svn directories from
everywhere, but the semantics of other svn commands, particularly their
pickiness about whether parent directories are in svn or not, means
that without the easy crutch of checking for those .svn directories,
code has to tiptoe around svn to avoid pissing it off.
There's a nice message if the plugin is loaded and used and highlight is
not available, and a nice fallback. So no need for this other warning,
which can happen any time all plugins are loaded to generate a setup file.
This is such a pity. smcv had these great dates, but squeeze's Date::Parse
cannot parse them.
Oh well, at least it makes for a great bug closure title.
This kind of change is scary, but this particular lock is very simply
used and so it seems ok to make it even just for better portability to
SunOS. (People still use that?)
* Add unminified jquery js and css files to source.
* Update to jquery 1.6.2, and jquery-ui 1.8.14.
The full files are included in the source but not the binary.
I'm not minifying the files as part of build because I don't want ikiwiki
to build depend on a javascript minifier. (Let alone need one at runtime).
Nor do I want to deal with any breakage caused by the minifier. These
files were taken from the debian packages.
The jquery-tmpl full file was taken from revision
66bb852217c49ae8c9a8f2522150354ae80463de of its git repository, which
matches the minified file I already had. I did not want to deal with possible
breakage in newer versions; this thing claims to need an ancient version of
jquery (1.4.2), and is perhaps only working by luck with the newer versions
as it is.
* mercurial: openid nicknames are now used when committing. (Daniel Andersson)
* mercurial: implement rcs_commit_staged so comments, attachments, etc
can be used. (Daniel Andersson)
* mercurial: fix viewing of a diff containing non-utf8 changes.
(Daniel Andersson)
* rename: Fix logic error that broke renaming pages when the attachment
plugin was disabled.
* rename: Fix logic error that bypassed the usual pagespec checks.
Imagemagick does not generate svg images very well, but it can convert
them to png quite well.
For browsers that don't yet support displaying svg, this also provides a
workaround; just scale the svg down to get a png. But the workaround is
partial, since scaling the image larger, or leaving it the same size will
cause the original svg to be displayed. Since browsers are actively
improving svg support, this is good enough for me.
Needed for attachment to return json when requested.
I think some browsers send Accept: * , so I made sure to check that json
was explicitly listed as to be accepted, as well as having a high
priority.
Two problems fixed:
1. Files are written with a .ikiwiki-new suffix, which has to be taken into
account.
2. Need to count length of bytes, not of unicode characters.
Joey Hess
Simon McVittie