Preliminary support, anyway.
If a dependency only includes DEPEND_EXISTS, then only changes that
involved adding or deleting a page can trigger it.
This is complicated by internal pages, since the code did not previously
differentiate between add, delete, and change of internal pages.
Now it tracks change separately from add+delete, so DEPEND_EXISTS pagespecs
that actually match internal pages (which will probably be quite rare in
practice) should work.
As soon as a change happens, we know we will need to rescan all
dependencies from the start, so bail out of the current scan partway to
avoid doing redundant work.
Only problem with this is that ikiwiki sometimes ends up printing out
dependencies that, while correct, are not obvious. Before:
building B, which depends on A
building C, which depends on A
building D, which depends on A
After:
building B, which depends on A
building C, which depends on B
building D, which depends on C
I had assumed that an image shown full size did not need add_depends, since
a change would not need a change to the displaying page.
But this is not true if the image is modified and its size changes. Then
the page needs to update its img tag to reflect the current size.
If an image was resized smaller, with width and height specified to values
that did not fit its aspect ratio, the image tag with/height were not
adjusted to the actual size imagemagick chooses.
This was broken by 03449610d6.
To fix it right, it unfortunatly needs to always read the src image now,
in order to determine if the image is being displayed larger, or resized
smaller. When resized smaller, it then always uses the size of the
thumbnail, while for larger it calculates the size.
(Only way to get rid of this sometimes extra image read would be to change
it to not allow displaying images larger.)
Through a complex chain of circumstances, that filtering was causing
dumpsetup to trigger undefined warning messages from the po plugin. But
anyway, munging the otl in htmlize is less error-prone and less expensive,
a win all around.
Loading and use of IkiWiki::Receive can all be pushed into the git plugin,
rather than scattered around.
I had at first wanted to make a receive plugin and move it there,
but a plugin was not a good fit; you don't want users to have to manually
load it, and making the git plugin load the receive plugin at the right
times would need more, and ugly code.
calls are warranted. They shouldn't modify the caller's working directory,
though. Use File::chdir to keep the scope of the changes subroutine-local.
The tests now pass without resetting the working directory.
* In Wrapper.pm, add a new hook "wrapperargcheck" to examine argc/argv
and return success or failure. In the failure case, the wrapper
terminates.
* In cvs.pm, implement the new hook to return failure if a directory is
being cvs added.
having to quote, and the possible use of the shell) sucks. Stop
passing args to cvs_runcvs() as an arrayref, since that also sucks
(and was a sop to IPC::Cmd). Instead, use Joey's construction for
temporarily redirecting stderr to /dev/null. Much much simpler and
better. Works on my laptop with bozohttpd, now to test on the NetBSD
wiki.
TeX has configuration options that prevent unsafe things like shell
escapes and insecure file reads/writes. Turn all of them on.
teximg's regex-based blacklist does not suffice. For instance:
[[!teximg code="""
\catcode`\%=0
%input{/etc/passwd}
"""]]
Remove the blacklist, since the TeX configuration options seal off the
underlying mechanisms more safely, and the blacklist blocks other TeX
commands that can prove useful.
Although imagemagick handles even really large sizes sanely, using a page
file, doing so would just waste time and disk space, since the browser
can be told to resize it larger.
checkconfig can run more than once in a single ikiwiki run if setup is
building wrappers. That clobbered the origsub value for bestlink, leading
to infinite recursion
It's not "exact" since case munging has to be done, and I think
"simple" captures the optimisation better.</pedant>
With apologies to smcv, who probably has to rebuild his wiki now.
Let E be the number of dependencies per page of the form "A depends on B and
nothing else", let D be the number of other dependencies per page,
let P be the total number of pages, and let C be the number of changed
pages in a refresh.
This patch should speed up a refresh from O(E*C*P + D*C*P) to
O(C + E*P + D*C*P), assuming that hash lookups are O(1).
In practice, plugins like inline and map produce a lot of these very simple
dependencies, and my album plugin's combination of inline with a large
number of pages causes it to suffer particularly badly.
In testing on a wiki with about 7000 objects (3500 full pages, 3500
images), a full rebuild continued to take about 5:30, and a refresh
after touching about 350 pages and 350 images reduced from 5:30 to 1:30.
As with my previous optimizations, this change will result in downgrades not
working correctly until the wiki is rebuilt.
This is unnecessary and just slows us down (by a factor of 2, in the
pessimal case where every page has an inline with pagenames); it's also
not possible to optimize it into add_depends_exact calls.
Set rootpage to the non-l10n'd rootpage parameter if it is set,
else to the masterpage of the linking page.
Signed-off-by: intrigeri <intrigeri@boum.org>
The po plugin's injected bestlink must do something special when called by this
exact part of inline's code.
Signed-off-by: intrigeri <intrigeri@boum.org>
... else, the recentchanges page shows a link such as "sandbox.es". But,
clicking on it goes to the English (or negotiated language) version of the page.
It is better in this one case if the link goes direct to the translated version
of the page.
(cherry picked from commit 496e8523c6)
... else, the recentchanges page shows a link such as "sandbox.es". But,
clicking on it goes to the English (or negotiated language) version of the page.
It is better in this one case if the link goes direct to the translated version
of the page.
This should be more efficient than pagespec_match_list since it short-circuits
after the first match is found.
The other problem with using pagespec_match_list here is it may throw an
error if a bad or failing pagespec somehow got into the dependencies.
The new dependency handling works better (eliminates more duplicates) if
dependencies are split up. On the same wiki mentioned in the previous
commit, this saves about a second (i.e. 4%) on the same test.
On a large wiki you can spend a lot of time reading through large lists
of dependencies to see whether files need to be rebuilt (album, with its
one-page-per-photo arrangement, suffers particularly badly from this).
The dependency list is currently a single pagespec, but it's not used like
a normal pagespec - in practice, it's a list of pagespecs joined with the
"or" operator.
Accordingly, change it to be stored as a list of pagespecs. On a wiki
with many tagged photo albums, this reduces the time to refresh after
`touch tags/*.mdwn` from about 31 to 25 seconds.
Getting the benefit of this change on an existing wiki requires a rebuild.
can evaluate them, check them in the wrapper right off the bat.
This doesn't prevent the deadlock in web commits that need to cvs
add directories, but I'm committing so Joey can take a look if he
wants.
This is both faster, and propigates any error in processing the feedpages
pagespec out to display on the page. Which may have been why I didn't use
it before, but currently seems like a good thing to do, since it explains
why your feeds are empty..
If a page is taken from the underlay, and one of the specified languages
does not have po files in the underlay, it would create a broken link
to the translated version of the page for that language.
With this change, there's no broken link.
I think the N/A was not intended to be visible, but it can show up as the
percent translated to a language. This happens if the page is located in an
underlay, and not translated to the language in any other underlay.
Previously, [[!meta redir="foo"]] on bar, where bar/foo exists, would
depend on "foo" (which matches nothing, probably) rather than "bar/foo".
(cherry picked from commit f27ec09b72f886415e63fe394e18d9c3cb3913bf)
Previously, [[!img bar.jpg]] on foo, where foo/bar.jpg exists, would
get a dependency equivalent to "glob(bar.jpg)" (which might not match
anything), rather than the correct "glob(foo/bar.jpg)".
(cherry picked from commit 85b2ec49ecd12dd23e5c432933457a72744ce7cb)
During backlink calulation, all links are examined and broken links can
be detected for free, so store a list of broken links and have brokenlinks
use it.
Exposing the %brokenlinks structure is a bit ugly, but the speedup seems
worth it: Around 1 second for wikis the size of the doc wiki that use
brokenlinks.
By adding this setting, we get both more configurability, and a minor
optimisation too, since gettext does not need to be called continually
to get the Discussion value.
This was impressively broken. add_depends was being called with params
backwards, and on parameter was set to the name of the generated
file, which isn't in the source.
Now updates to images will update the page that contains them, thus
updating them. This is unncessary for fullsize images, so skipped.
Serving up images etc. as text/plain; charset=utf-8 is unlikely to work
very well, and there's no point in having this CGI action for attachments
(since they're copied into the output as-is anyway).
Joey Hess
Amitai Schlair
Amitai Schlair
Josh Triplett
Simon McVittie
intrigeri
Will Uther
harishcm