* Created base sixshooter configuration
* Added SixShooter basic LED on/off support.
* Updated LED identifier numbers to align with layout identifiers (and IDs on PCB).
* Minor sixshooter documentation cleanup.
* Added sixshooter info.json file.
* Moved sixshooter custom keycodes out of keymaps and into base keyboard files, small documentation tweaks.
* Removed unnecessary boot section size definition.
* Removing CONFIG_H if/define and replacing with #pragma once.
* Adding my personal planck keymap
* Adding readme.md to my keymap
* Create my userspace
add users/ishtob/
* Moved macros off keymap
macros now exsists in my userspace, moved them off keyboard specific keymaps
* Create my userspace
add users/ishtob/
* rebase from main QMK repo
* add change_reciver2sender()/change_sender2reciver()
This is a change to improve readability.
* txled, rxled off in matrix_init()
* add serial_send_packet() / serial_recive_packet()
This is a change to reduce object size.
* add serial_low() at ISR() top
* add __attribute__((always_inline)) to some functions
* modify serial_send_packet()/serial_recive_packet()
A little, object size reduction.
A little, speedup.
* add debug code to helix/serial.c
* Adjust sampling timing of serial signal being received
* add split_scomm.c/split_scomm.h and change serial.c/serial.h
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
* add split_scomm.c/split_scomm.h into helix/rev1
* reduce object size helix/rev2/matrix.c
* remove checksum check, add parity check
* force occur parity error for test
* parity test ok. remove test code
* change some comment & add skip code when buffer_size == 0
* serial.c: multiple types of transaction support
Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.
* helix serial master-slave transaction optimize
Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.
* add debug code for retry
* add comment into each config.h
* fix ISR status drop
* add a debug macro 'debug_retry_chg()'
* reduce led_test size
* remove debug code from helix/serial.c and etc.
* helix:five_rows change TAPPING_TERM value 140
* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.
- The difference with the original let's split's serial.c
- It's high-speed about 4 times.
- Stable bi-directional data transfer. (Helix need master to slave transfer)
- serial.h was divided 2 files, serial_config.h and sereial.h
- With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)
- USE OLD Simple APIs (compatible with let's split serial.c)
- files :
- serial_config.h -- hardware configuration (need include by config.h)
- serial.c/serial.h -- serial communication
- USE NEW flexible APIs. (Support multi-type transaction function.)
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
- files
- split_scomm.c -- communication buffer is defined in here. call by matrix.c.
- split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
- serial_config.h -- hardware configuration (need include by config.h)
To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
- serial.c/serial.h -- serial communication lower layer
- NEW APIs for serial.c / serial.h (The lower layer)
// Soft Serial Transaction Descriptor
typedef struct _SSTD_t {
uint8_t *status;
uint8_t initiator2target_buffer_size;
uint8_t *initiator2target_buffer;
uint8_t target2initiator_buffer_size;
uint8_t *target2initiator_buffer;
} SSTD_t;
// initiator is transaction start side
void soft_serial_initiator_init(SSTD_t *sstd_table);
// target is interrupt accept side
void soft_serial_target_init(SSTD_t *sstd_table);
int soft_serial_transaction(int sstd_index);
int soft_serial_get_and_clean_target_status(int sstd_index);
- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
move from old serial.c the following buffer and functions
serial_slave_buffer[]
serial_master_buffer[]
void serial_master_init(void)
void serial_slave_init(void)
int serial_update_buffers(void)
define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
<!-- http://www.keyboard-layout-editor.com/#/gists/c1e8a15c68e4c52eed84653f21ae2d29 -->
Designed specifically to make switching back-n-forth with the Apple's MacBook Pro keyboard intuitive. Has a slight tendency toward readline/vim keybindings.
Caps locks becomes an `Esc` when pressed alone, or a `Ctrl` when pressed with another key.
Base Layer
----------
As simalar to the Apple keyboard as possible. Notiable exception is `Caps Lock`:
- `Esc` when pressed alone
- `Ctrl` when pressed with another key
Control+ Layer
--------------
Left `Ctrl` key switches to the "Control+ Layer". This layer mostly acts like a control key in most cases, with a few exceptions:
- `Ctl+` + `hjkl` are vim-style motion keys
- `Ctl+` + `p` and `Ctl+` + `n` are page up and down
- `Ctl+` + `Backspace` is forward delete
Fn Layer
--------
Audio Controls:
- `Fn` + `a` Volume Down
- `Fn` + `s` Volume Up
- `Fn` + `d` Mute
To flash this layout you need to press `Fn+Backspace`
Designed specifically to make switching back-n-forth with the Apple's
MacBook Pro keyboard intuitive. Has a slight tendency toward
readline/vim keybindings.
Caps locks becomes an `Esc` when pressed alone, or a `Ctrl` when pressed
with another key.
Base Layer
----------
As simalar to the Apple keyboard as possible. Notiable exception is
`Caps Lock`:
- `Esc` when pressed alone
- `Ctrl` when pressed with another key
Control+ Layer
--------------
Left Ctrl key switches to the "Control+ Layer". This layer mostly acts
like a control key in most cases, with a few exceptions:
- `Ctl+` + `hjkl` are vim-style motion keys
- `Ctl+` + `p` and `Ctl+` + `n` are page up and down
- `Ctl+` + `Backspace` is forward delete
Fn Layer
--------
Audio Controls:
- `Fn` + `a` Volume Down
- `Fn` + `s` Volume Up
- `Fn` + `d` Mute
To flash this layout you need to press `Fn+Backspace`
* Adds Fleuron keyboard directory and default layout
* Adds Fleuron keyboard directory and default layout
* adds double zero macro, and updates to the new macro methodology
* adds raise and lower layers
* removes makefile from default layout, turns off mousekey, console, and command in rules.mk
* makes upper right key a bksp in default layout, adds .json layout file
* updates to default layout
* tweak default layout jusabit
* fix raise and lower switch case, and scoot a few keycodes around
* make changes for PR #3571
* fixing erros for PR #3571
* adds Dollartacos first custom keymap
* fixes for PR #3571
* Initial Commit of catch22 macropad by rockydbull
* Add configurator info.json
* Use macros
* Use pragma once
* Use CA22 as product id
* Clean up readme
* Use the layer define value
* Feedback from @drashna
* initial commit
* get the matrix correct
* make my name be known
* add rgblight enable
* add a default keymap
* Add QMK Configurator support for the base layout
* add name here too
* fix up readme
* remove set user from keymap
* use led_set_kb as per drashna's comments on PR
* cloned colinta as base
* switched to default base. started customising
* minor changes to layout
* added mouse keys
* minor tweaks to layout and mouse speed
* updated readme
* tweaked layout
- added middle fn keys
- moved rgb controls to fn layer middle
- added special keys to fn layer right
* moved scroll buttons as to not interfere with lshift
* turned on backlight
* fixed backlight
* changed user keycodes to differentiate
* changed folder name to lowercase
* updated readme
* stop processing after custom keycode
* edits to suit new standards
* added layer indicator using gp100 and gp103
* Rules for vitamins_included
Added a section to disable RGB underglow for the Let's Split
Vitamins Included board.
* fixing ortho_4x12 configs
* Using upstream/master version instead
* Additions and Corrections
Corrected the Kinesis/Stapelberg's .c file to allow LEDs to work
Removed excess cruft from my Kinesis keymap to reflect this change
Other minor tweaks and adjustments to my ortho_4x12 and 5x12 layouts
* Updated readme
* dz60/macos_arrow: move the eject key on esc to leave right cmd+bksp for move to trash
* dz60/macos_arrow: move the reset key on the media layer
This avoids accidental activation.
* dz60/macos_arrow: disable LEDs
* jennetters fourier keymap, tapdance declarations and reformatted keymap file for readbility
* Update rules and keymap to follow new makefile setup.
* Add #pragma once to config.h
* add SCREEN_NAV layer for copy/pasting within screen
* working readreg/paste macros
* working read reg / paste macros
* write log and tran patterns, and expand
* add ls -la shortcut, add tab on combined layer
* put delete word on the right pinky key on shell_nav layer
* add TAB on the right side, add reset key
* added Cloud9 macros
* add cloud9 shortcuts to atreus layout
* added BROWSER_CONTROL layer
* finalized browser control layer
* adding comment
* add browser control layer to atreus
* add flashing command line
* remove the tab on combined layer
* remove the tomouse
* remove mouse layer, change log/tran expand patterns, cleanups
* add dumptlog macro
* add "delete to home" shortcut
* fix conflict
* remove unneeded mouse layer
* add meh shortcuts on the browser_control layer
* add/modify some macros
* explain the various layers
* Add files via upload
Added a nordic layout for UT47
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update to readme and keymap files
* Update readme.md
Changed cover image
* Update readme.md
typo fix
* Delete config.h
* Delete keymap.c
* Delete readme.md
* Delete rules.mk
* Updated cover image in readme.md
Fixed typo in image of keymaps
* Update keymap.c
Changed backslash to forward slash in first function layer.
* Add files via upload
* Delete config.h
deleting files so I can upload to a folder with lower case name
* Delete keymap.c
deleting file so I can change to lower case name
* Delete readme.md
deleting file so I can change to lower case name
* Add files via upload
* Update keymap.c
Cleaned up definitions in beginning of file.
* Update keymap.c
forgot an include
* Update keymap.c
* Update readme.md
Updated picture of layout, link was wrong and pointed to an old/removed image.
* Update readme.md
Fixed error in link to keyboard layout editor
* Update keymap.c
More cleanup of the includes at beginning of file
* Update config.h
* Update keymap.c
Fixed typo: Volume Down and Volume Up on the Tab layer were switched.
* Update keymap.c
* Added a macro on the Tab layer for <kbd>Ctrl</kbd>+<kbd>Alt</kbd>+<kbd>Del</kbd>
* Added a macro on the Gaming layer for <kbd>Alt</kbd>+<kbd>Tab</kbd> (replaces prebious Backspace key)
* Update readme.md
Updated readme.md file to reflect changes to keymap.c in cover photo and KLE link.
(added short cuts for Ctr Alt Del and Alt Tab)
* fix for that stupid LED
* formatting changes and add firmware flashing warning to readmes
* update readme with more info
* add LAYOUT_60_ansi thanks to help from phlop
* add configurator support for 60_ansi
* add 60_ansi for community layout support
* Bocaj Layout Revamp
* Pull in Upstream (#1)
* Various tweaks for some Input:Club build processes
* change KEYMAP to LAYOUT for all new keyboards made using this script
* Add support for rev3 of the Atom47 (#2672)
* Added support for rev3 of the Atom47
* Updated Atom47 readme's
* Fix redefine error on rev2 and add maartenwut's keymap
* Fix redefine error on LEdiodes keymap
* Add Nyquist keymap (#2692)
* nyquist
* danielhklein nyquist setup
* shift left controls
* remove readme
* cleanup before pr
* ready for pr
* Adds Phantom TKL support (#2696)
* Add an info.json to phantom keyboard
* Add layouts
- KEYMAP_WINKEYLESS
- KEYMAP_7BIT
- KEYMAP_ISO
- KEYMAP_ISO_WINKEYLESS
* Add key_counts
* Add 2 missing F-Row keys
* Add TKC1800 info.json
Created an info.json for the tkc1800.
* Clueboard 60 info.json
- adds
- LAYOUT_60_ansi
- LAYOUT_60_iso
- KEYMAP_AEK
- KEYMAP
- LAYOUT_60_ansi_split_bs_rshift
* Add the Speedo keyboard
* Fix KC60 info.json file (#2707)
* change KEYMAP to LAYOUT in all the KC60 files
* Redo the info.json file
* Small fixes to TKC1800
- adjust F-row to use 0.25 spacing
- split left shift
- add key_count
* Fix some Configurator Warnings regarding LAYOUT vs KEYMAP (#2708)
* change diverge 3 KC_KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for handwired arrow pad
* change M10A to LAYOUT for m10-a
* Change KC_KEYMAP to LAYOUT_kc and KEYMAP to LAYOUT for mf68
* change KC_KEYMAP to LAYOUT for nano
* Refactor to LAYOUT
* refactor to LAYOUT-ansi and LAYOUT_iso for s65
* LAYOUT conversions for lfkkeyboards
* missed a few renames
* mini1800 for lfkeyobards support of LAYOUT
* Improve state/chord handling and clean up namespace
Some values that can never, ever, change were held in local
variables, rather than in PROGMEM. Fixed.
Change "pressed" to a signed int so the test for < 0 makes
sense, and to avoid possible weird failure modes in the
case where a key release comes in when pressed is already
zero. (Shouldn't happen, sure, but computers are weird.)
A lot of things in process_steno had external linkage for no
particular reason. They've been marked static. Stuff still
builds.
Distinguish between currently-held keys and keys that have
been held, and expose these values through a nicely-named API
so other code could, say, check on the current set of steno
chording in order to make displays. Also in passing fix up the
"state" value having external linkage so it could clash with
other people's variable declarations.
The API also provides hooks for key processing and steno chord
events, so you can monitor those events without having to
run in matrix_scan_user and recheck the values directly. Also
document these.
There is no path through processing a key that doesn't
end with a return false, so the nested return foo() are
gone and we just return false.
* Pull information from config.h and rules.mk (#2711)
* Pull information from config.h and rules.mk
* Readd the kbd75 maintainer
* Remove obsolete info.json entries (#2712)
* Clean up some long-standing errors when populating the API (#2715)
* More Configurator Warning Fixes (#2716)
* mf68_ble did not have the correct .c and .h files
* Fix JC65 KEYMAP to LAYOUT
* Change KEYMAP to LAYOUT for s60_x
* Convert KEYMAP to LAYOUT for lets_split boards
* Convert KEYMAP to LAYOUT
* more fixes to keymap for iris
* convert KEYMAP to LAYOUT for levinson keyboard
* change losinggeneration's KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for nyquist
* convert KEYMAP to LAYOUT
* convert KEYMAP to LAYOUT for viterbi
* convert KEYMAP to LAYOUT
* convert KEYMAP and its subsidiries to the LAYOUT standard
* convert KEYMAP and its subsidiries to the new LAYOUT standard
* Normacos keymap for let's split keyboard (#2691)
* Cheers let's split keymap
* fixed typo on norman layer of cheers keymap for let's split
* fixed right handed mappings for home row
* cheers keymap for let's split redefinition
* updated Cheers keymap for let's split
* cheers keymap for let's split updated with some terminal macros
* renamed cheers let's split keymap to a more appropriate normacos
* updated normacos keymap doc / removed non functional keys
* reset let's split rules to default values
* added more spotlight search macros
* normalized keymap comments
* Moved numpad on lower layer
* hhkb jp personal keymap (#2698)
* Add JJ40 Cockpit personal keymap (#2713)
* Add JJ40 Cockpit keymap
* Fix lower layer symbols
* Add readme for "major" keyboards to eliminate more QMK Configurator errors (#2718)
* add readme to ktype keyboard
* add readme to m10a
* add readme to mini1800
* add readme to parent directory
* Revert "Pull in Upstream (#1)"
This reverts commit eeba0cec17ccb636e4225eed88aeae72b99f5e45.
* Updates to Bocaj Files
- Gave up on Tap Dance for ' -> '
+ Added another 'Secret'
+ Add ' -> ' to the Swap Hands key
+ Add Swap Hands to the ' -> ' key
+ Made Hand Swapping a momentary toggle
- Removed Auto Shift
+ Added Layer Toggle to KC_QUOTE for the _TOOLS layer
- Disabled Tap Dance
* Merge remote-tracking branch 'upstream/master'
* Updates to Bocaj
Added Game Layers, Removed Unused Macros
* Removed 'secrets.h'
* Updates to Bocaj
Remove 'secrets'.
Remove 'sendstring_workman.h' and set related layer back to qwerty due to macro compatibility issues
* Total revisioning of keymap and layout structure
* Missed readme.md file
* Bocaj - Permissive Hold setting enabled
* Add files via upload
Added a nordic layout for UT47
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update to readme and keymap files
* Update readme.md
Changed cover image
* Update readme.md
typo fix
* Delete config.h
* Delete keymap.c
* Delete readme.md
* Delete rules.mk
* Updated cover image in readme.md
Fixed typo in image of keymaps
* Update keymap.c
Changed backslash to forward slash in first function layer.
* Add files via upload
* Delete config.h
deleting files so I can upload to a folder with lower case name
* Delete keymap.c
deleting file so I can change to lower case name
* Delete readme.md
deleting file so I can change to lower case name
* Add files via upload
* Update keymap.c
Cleaned up definitions in beginning of file.
* Update keymap.c
forgot an include
* Update keymap.c
* Update readme.md
Updated picture of layout, link was wrong and pointed to an old/removed image.
* Update readme.md
Fixed error in link to keyboard layout editor
* Update keymap.c
More cleanup of the includes at beginning of file
* Update config.h
* Update keymap.c
Fixed typo: Volume Down and Volume Up on the Tab layer were switched.
* Added initial files for QC60 prototype
* renamed all 'keymap' to 'layout'
* renamed layout macros to suggested naming convention of LAYOUT_macro_description
* replaced boilerplate
* removed rules.mk from keymap folders
* replaced 'qc60/rev1' with 'qc60/proto'
* replaced more boilerplate
* renamed DEFAULT_FOLDER to point at the correct folder
* updated readme
* Add files via upload
Added a nordic layout for UT47
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update to readme and keymap files
* Update readme.md
Changed cover image
* Update readme.md
typo fix
* Delete config.h
* Delete keymap.c
* Delete readme.md
* Delete rules.mk
* Updated cover image in readme.md
Fixed typo in image of keymaps
* Update keymap.c
Changed backslash to forward slash in first function layer.
* Add files via upload
* Delete config.h
deleting files so I can upload to a folder with lower case name
* Delete keymap.c
deleting file so I can change to lower case name
* Delete readme.md
deleting file so I can change to lower case name
* Add files via upload
* Update keymap.c
Cleaned up definitions in beginning of file.
* Update keymap.c
forgot an include
* Update keymap.c
* Update readme.md
Updated picture of layout, link was wrong and pointed to an old/removed image.
* Update readme.md
Fixed error in link to keyboard layout editor
* Update keymap.c
More cleanup of the includes at beginning of file
* Update config.h
* fabian layout
* added MOUSECURSOR layer that gets activated by holding space
* cleanup, meh and tilde and grave as separate keys, toggle switch for mousecursor layer
* merged default
* #pragma once
* including QMK_KEYBOARD_H instead of various imports
* using layer toggle instead of a function
* deleted obsolete rules.mk (was part of the old makefile system)
* #pragma once
* including QMK_KEYBOARD_H instead of various imports
* use ifndef KEYBOARD_planck_rev6 instead of ifdef KEYBOARD_planck_rev5
* Temporary work around for CB60 sound issues
Discussed this with @fredizzimo, upping the system ticks to 100K fixes
the sound issues I was having with the CB60; speaker would fail to shut
off after playing music, sometimes at startup. This changes the matrix
scan time from it's default of every 2ms to once ever 200us.
Fred has a more extensive change to the way matrices are scanned which
will require less clock cycles and we can then revert this change at
that time.
* Remove keymap dir from clueboard root
* Arrow: matrix and keymap refactor
* Left: matrix and keymap refactor
* Numpad: matrix macro correction
* Numpad: add support for community layouts numpad_5x4 and ortho_5x4
* Right: matrix and keymap refactor
* DC01 global readme cleanup (minor grammar)
* DC01 global Configurator support
* Right: bugfixes for HHKB-style keymaps
* Replace KC_NO with ___ in matrices for readability
* Add K49 to LAYOUT matrix
K49 was previously was stated to be padless, but it's actually the right-hand half of a split Backspace.
* Switched positions of K3C and K3D in LAYOUT matrix
When using a split right Shift, K3D is to the left of K3C.
* Insert KC_NO (___) element into bottom row of LAYOUT_60_ansi matrix
Reported by @NimMooMoo on QMK Discord
Right-hand modifiers on bottom row were shifted one key to the right. After debugging, discovered that the "electrical matrix" (the part of the matrix macro that determines which row and column a key uses) was one element short on the last row at K49, causing the rest of the row to be offset by one column.
This commit corrects that issue.
* Added a missing comma in the LAYOUT matrix
* Moved F row to raise
* Moved mouse keys over one space and removed unneccessary code
* Moved delete on lower
* Added CTRL functions
* Added Print Screen
* Added README.md file
* Updated CTRL
* Updated readme to current CTRL
* Minor Changes
* Updated mouse speeds
* Unknown changes
* Updated README and keymaps
* Removed caps from number row and put it in special
* Moved around equals sign again
* Updated mouse key speed
* Pull Request Updates
* Put in my keymaps
* Fixed all but weird lets split issue
* Organized and tried to trobleshoot lets split
* Organized and tried to trobleshoot lets split
* Added bbaserdem keymaps
* Added bbaserdem keymaps
* Fixed stuff
* FIxed a filename error
* Lets split eh
* Finalized things regarding keymap
* LFKPad: matrix refactor
* LFKPad: keymap refactor (QMK_KEYBOARD_H; matrix update)
* LFKPad: Configurator support
* LFKPad: added community layout numpad_6x4 to rules.mk
* LFKPad: Update rgb_sequence to match new matrix
* LFKPad: delete deprecated makefile include block from rules.mk
* DC01 initial commit
- Addition of directories
- Left readme
* Initial commit of left half
* Initial files for right half
* arrow
* i2c adjustments
* I2C slave and DC01 refractoring
- Cleaned up state machine of I2C slave driver
- Modified DC01 left to use already pressent I2C master driver
- Modified DC01 matrixes
* Fixed tabs to spaces
* Addition of Numpad
* Add keymaps
- Orthopad keymap for numpad module
- Numpad keymap for numpad module
- ISO, ANSI and HHKB version of keymap for right module
* Minor matrix.c fixes
* Update Readmes
* Add support for LFK65-HS - a hotswap 65%
* Add info.json for LFK65-HS
* Clean up for new build system, remove uneeded code.
* LFK65-HS cleanup. Fixed LAYOUT macros, etc
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
* Fixed split_common assuming I2C for RGB and Backlight. Added serial backlight support (stole from bakingpy's Levinson code ;) ) Serial RGB not implemented yet. Also Added "USE_IC2" to the lets_split_eh/eh as that was looked over.
* Fixed stupid mistake, forgot to set BACKLIT_DIRTY to false after setting slave backlit settings for serial
* Updated backlight data block to be cleaner (thanks drashna ;) )
* Add files via upload
Added a nordic layout for UT47
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* Add files via upload
* Update to readme and keymap files
* Update readme.md
Changed cover image
* Update readme.md
typo fix
* Delete config.h
* Delete keymap.c
* Delete readme.md
* Delete rules.mk
* Updated cover image in readme.md
Fixed typo in image of keymaps
* Update keymap.c
Changed backslash to forward slash in first function layer.
* Add files via upload
* Delete config.h
deleting files so I can upload to a folder with lower case name
* Delete keymap.c
deleting file so I can change to lower case name
* Delete readme.md
deleting file so I can change to lower case name
* Add files via upload
* Update keymap.c
Cleaned up definitions in beginning of file.
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
* Use string with delay
* Add skipped region to ergodox
* Add send string config
* Use default_layer_state instead of function
* Fully generalize keyboards
* old iris cleanup
* Fix Drashna keymap compile issues
By checking to see if secret.c exists before actually trying to add it
* Remove unnecessary references
* Add 4x12 ortho board
* Update userspace readme for secrets
* Make RGB more modular
* Fix iris keymap, since we don't need the lower left (Function keys)
* Fix includes
* Add Blanks
* Fix Ergodox lower layer
* Add suspend commands
* Add Maltron Layout
* Add additional layouts
* Finish adding gamepad to Iris
* Tweaks to iris gamepag layer
* make gaming layers more friendly
* minor gaming layer tweak
* Add Carplax
* Add modded key timer function
* Cleanup and macro documentation
* Add QMK DFU info
* Add 'old' keymap for 12 LED spare
* Update Pro Micro documentation
* Disable twinkling so it fits in firmware space
* Switch to QMK DFU bootloader, since it's better anyhow
* Write default layer state colors to EEPROM
Since we are writing to EEPROM anyways, and this way, it sticks on reboot
* Fix QMK DFU bootloader options
* More updates for QMK DFU support
* Use matrix scanning hack for startup_user until #3113 gets merged
* Fix indicator light consistency issue
* Add/readd ifdefs to indicators
* Add/readd alt indicator
* Remove RGB Twinkling from Viterbi macro pad
* Fix default layer color detection
* Fix rebase and detection issues
* Cleanup code so it will compile if RGBLIGHT is disabled
* Revert vsode settings
* Use Pragma Once instead of boilerplate code
* initial files for rev 6 with encoder
* music map init, dip scan added
* adds ws2812 driver for arm
* flesh out dip and encoder support
* adds default encoder res
* adds default encoder res
* start muse implementation
* muse working with encoder as control
* flip direction
* try mouse wheel again
* dont break other revs
* dont break other revs
* conditional autio
* pwm ws driver (not working)
* update build includes for chibios
* update ws2812 driver/config
* last commit for glasser code
* working example
* remove rgb for now
* finish up rev6
* working encoder keycodes
* add warnings to planck keymaps about the LAYOUT
* - Fixed DK60 version in config.h
* - Updated dk60 readme with new QMK rules
* - Fixed wording in readme
* Added dbroqua layout for DZ60
I've also updated dz60.h to add "true HHKD" keymap definition (6U
spacebar).
With the default HHKB definition r_alt was not mapped and when I pressed
r_menu it was r_alt.
Regards
* Updated dbroqua layout for HHKB keyboard
Added default configuration and alternate (swap gui/alt keys).
Save user choice in keyboard memory (like plank, thanks for this
feature!).
* Added dbroqua layout for Iris keyboard
* Updated layout and fixed includes
* Turn backlight support on by default
* Correct error on LED backlight support
Turns out, it doesn't work if you don't enable it in rules.mk. Who knew?
* mitosis:datagrok: improved tenkey layout; changelog + more in README
* mitosis:datagrok enable audio!
* mitosis:datagrok: underscore on right shift, rearrange some symbols
* mitosis:datagrok: add more descriptions to readme
* mitosis:datagrok: abuse space cadet to get equivalent of RSFT_T(KC_UNDS)
Friend was having trouble with their tada since their build environment wasn’t setup. Updated so they could access the links that were listed (old links 404’d)
* default keymap refactor: QMK_KEYBOARD_H include; readability
* Configurator support
* info.json was missing a comma
* Added matrix functions to matrix.c per @drashna
* Moved info.json to rev1 directory
* rev1 info.json metadata update
* Configurator support for ErgoDash rev2
* Moved rev1/ergodash.h to ergodash.h
* Integrate rev2 support into ergodash.h; delete rev2/ergodash.h
* add hhkb bluetooth functionality (rn42)
pretty much straight from tmk
some minor changes to make things work
* hhkb jp personal keymap
* Revert "hhkb jp personal keymap"
This reverts commit 886713d8bb98572f03110f285706a8140a083892.
* Initial commit for Comet46 firmware
* Update Comet46 README
* Add readme to satt keymap of comet46
* Add default keymap for Comet46
* Fix broken link in readme
* Delete redundant includes
* Modify default keymap & fix LAYOUT macro
* Modify satt keymap of Comet46
* Add H87a keymap and info
* Create readme.md
* Add h87a .json for kbfirmware.com use
* Update readme.md
* Update readme.md
* Update h87a files
* Delete Makefile
* Update readme.md
* Delete desktop.ini
* update files to match new QMK framework
* Update files to match new QMK structure
* Update files to match new QMK structure
* add layout name information
* Add info.json
* update keymap to support layout_all
* update keymap to support layout_all
* update rules.mk to fix filesize
* Update readme.md
* Update config.h
* Update readme.md
* Update config.h
* Update config.h
Add "define CONFIG_H and include "config_common.h" back to file
* Added basic MxSS support
* Fixed split RSHFT for ISO layouts
* Updated readme.md for MxSS
* Added initial support for individual control of front RGB LEDs
* Changed RGBLED color selection to work using hue and saturation rather than RGB
Added code for LED state change on layer change
* Avoid needing an entire 8 bits to store the brightness value
* Added custom keycodes, along with their handlers
* Added EEPROM storage for front LED config
* Fixed up ability to use QMK Configurator and updated readme.md
* Applied suggested changes from pull request: https://github.com/standard/standard/issues/452
Updated name in license descriptions
Updated layouts to snake case
Corrected mistakes in info.json
Updated layer_colors to a weak attributed array in mxss.c
* Defined a new safe range for custom keycodes in keymap.c
* Fixed up issues with front LED
Fixed LEDs not always updating in indicator mode
Added support for the other RGBLIGHT modes in RGB mode
* Attempted fix for ISO layouts for QMK configurator
* Added basic MxSS support
* Fixed split RSHFT for ISO layouts
* Updated readme.md for MxSS
* Added initial support for individual control of front RGB LEDs
* Changed RGBLED color selection to work using hue and saturation rather than RGB
Added code for LED state change on layer change
* Avoid needing an entire 8 bits to store the brightness value
* Added custom keycodes, along with their handlers
* Added EEPROM storage for front LED config
* Fixed up ability to use QMK Configurator and updated readme.md
* Applied suggested changes from pull request: https://github.com/standard/standard/issues/452
Updated name in license descriptions
Updated layouts to snake case
Corrected mistakes in info.json
Updated layer_colors to a weak attributed array in mxss.c
* Defined a new safe range for custom keycodes in keymap.c
* preliminary Gray COD67 checkin
* Get part of the switch matrix prepped
* finish switch matrix
* mock the pins and keymap for now
* add keymap fixes
* update readme with flashing instructions
* keymap fix
* Add more flashing and notes info to readme
* remove un needed file
* fix comments
* add QMK Configurator Support
* Configurator support
* Add LAYOUTS = planck_mit to rules.mk
* Disable Tap Dance at the keyboard level
* Keymap refactor: QMK_KEYBOARD_H; enable Tap Dance for default keymap
* Add keymaps/default/rules.mk to enable Tap Dance
* Reverse the addition of config.h in keyboards/tetris/keymaps/default/
* Initial port of AL1 Keyboard from Triangle Labs
* Change REPLACE WITH YOUR NAME and some readme changes
* More readme change to indicate Group Buy Link
* Give Triangle Lab credit
* remove pins from config.h and rely on matrix.c
* Add QMK Configurator support
* new matrix for LE(Last Edition) E6V2
* Update pin outs for the new version of the PCB
* putting in some placeholders for now
* Trying to get e6v2/oe:default to compile
* put rules.mk in the right directory
* Add and update readme files
* move info.json to oe directory
* Update LE directory
* rename keyboard name
* Add QMK Configurator Support
At this time, ths only covers the ALL case and allows people to use
the configurator to generate their keymaps. More work will need
to be done.
* Refactor KEYMAP to LAYOUT standards
- Change KEYMAP to LAYOUT_ortho
- Added a new LAYOUT called LAYOUT_numpad
* Use the new LAYOUT_numpad macro
* Add QMK Configurator support
* Change LAYOUT names as per code review
* Change positioning of keys in the matrix
* fix compile issue
* initial support for kc60se extracted from Blake Lewis
* add my name to the list
* remove breathing as the backlight pin is not a PWM one
* use standard LAYOUT macros such as 60_ansi and 60_ansi_split_bs_rshift
* Make the base LAYOUT more sensible and add Configurator support
* add atmel-dfu bootloader
* Adding Rama M10-A Macropad
* ch-ch-ch changes...
* Major overhaul based on SMT's keymap.
* more changes.
* Moved the FKeys to the ADJUST layer.
* More rearranging.
* Alias in Atreus62 keymap to make it more legible
Added config.h to fix tapping_term issue for Caps Lock key in OSX
* Added OrthoDox layout.
* More layout changes.
* Fixing things with the keyboard.
* Finishing touches.
Set left-hand master in config.h
Embedded the arrow keys in keymap.c
* Revised keymap making this easier to use.
* additions and changes.
* changes to various keymaps.
* Minor adjustments to OrthoDox layout.
* Added Eco keymap. Updated Let's Split keymap.
* Added gherkin
* Removed my M10A keymap
* Planck Keymap Updates
Updated my Planck keymap and created a simple keymap for Seph's Preonic.
* Added readme
* readme fixes
* Update readme.md
more clarification
* Keymap Tweaks
Removed the Power button setting from the keymap. It was in a
horrible location. I'll work on getting it setup somewhere else
sometime later.
* Added Readme
I finally got around to adding a readme to this keymap. I've also added minor changes to the layout.
* Fixed Keymap Error
* Fixed Readme
* adding iris and levinson keymaps
* Tweaks to keymap
* added youngJZ keymap
* Changes to keymap
Added a readme.md
* Levinson changes
Added the readme.md and rules.mk files.
Configured RGB underglow and backlighting.
* fixed readme
* changes to keymaps
* Updated keymap
* Updated readme.md
* Updated Readme (again)
* Updated Readme
Fixed formatting. Again.
* Updated readme
This is the last readme update for this keyboard update. I hope.
* Added Contra keymap
* Kinesis Keymap Update
* Updated Keymaps
I've updated my Kinesis (Stapelberg) layout and my Clueboard 66 layout.
I've also updated my Kinesis Readme.
* Clueboard Keymap update
Added media keys to my Clueboard 66 Rev2 layout.
* Added keymap
Added Minidox keymap & rules.
Added user function to Let's Split keymap that turns off the red
LEDs on the Pro Micros.
* New Zen keymap
Added Zen keyboard to my list of keyboards, so had to generate a new
keymap for it.
Also adding some changes to my MiniDox keymap and config.h, as well
as my Levinson's config.h.
The config.h file changes enable ee_hands.
* A few changes for useability
I made a few changes to the Minidox keymap to see if I can't make it more useable.
I'm also working on streamlining the Zen keyboard keymap to reduce layers.
* Re-vamped Iris keymap.
* changes
* minor keymap change
This was a minor keymap change to use mod_tap for the backspace key:
ALT when held, BSPC when tapped.
* Added Fourier keymap
* Keymap Cleanup
Moved KC_ESC to KC_CAPS, and changed KC_ESC to KC_GRV
This is because of muscle memory, I kept hitting ESC when trying to hit TAB.
* Keymap Adjustments
Swapped Caps/Esc, put Caps in Raise/Lower layers, put Grv in normal
Esc position. Adjusted the readme.md to reflect these changes.
* minor tweaks
Added code to disable red ProMicro LEDs after flashing.
* Clean-up
* Corrections to keymap.
Fixed a foul-up in the Zen keymap where the lctrl was where the LOWER
should have been.
* Changes to make this fall in line with the new Layout features
* Moving to LAYOUTs for 4x12 boards
* fixed config.h file
* standardization changes
* Reverted Atreus62 keymap to LAYOUT format
* Switch Preonic and Nyquist to ortho_5x12
* Corrections to config.h
* config.h file tweaks
* config.h file tweaks
* Added missing integers.
* Updated Seph's keymap to LAYOUT standard.
* Keymap tweaks & changes
* Bringing keymap up to LAYOUT standard
* Trying to get LEDs working
* Fixes for Stapelberg
Updated my keymap to confirm to the new LAYOUT standard.
Updated the stapelberg.h to reflect this LAYOUT standard.
Updated the stapelberg.c files to hopefully get the LEDs working.
* Getting closer to Kinesis LED functionality.
* NKRO Fix
Disabled NKRO for VUSB ortho_5x12 boards
* Hardware update
Backlight enable
Change pin
Add 2keys (68→70)
* change readme
* support rev1
change keymap path
* move ergodash.h
* sync the left and right backlight led
matrix.c is same as iris keyboad
backlight breathing is unstable, so it comment out
* disabled commands
* dual spacefn, -= match to amj40 layout
-= was killing my muscle memory, so I moved it. Don't have any other
plans for kl though, so leaving them there as well.
* now helix led_test local rgblight.[ch] not use. remove.
* greatly simplify keyboards/helix/rev2/keymaps/led_test/keymap.c
Helix keymap 'led_test' use modified default/keymap.c
* Add Dynamic Macro Toggle using Tap Dance
One Tap -> Play Macro 1
Two Taps -> Stop Recording
Three Taps -> Start Recording Macro 1
* Move feature from default to dyn_macro_tap_dance
* Convert 4 space tabs to 2 space tabs
Follows qmk style guidelines
* Addition of hard brigtness limit for RGB_Matrix
- Added a define "RGB_MATRIX_MAXIMUM_BRIGHTNESS" to enable hard limiting the maximum brightness for rgb_matrix
- Used the above define to limit the maximum brigthness of HS60 for better stability
* Added docs for new rgb_matrix define
* Addition of check for maximum brightness
* Add mbsurfer keymap for DeltaSplit75 with ANSI split backspace
* Update mbsurfer DeltaSplit75 keymap to include right hand arrow cluster
* Update mbsurfer DS75 keymap, move volume down to be symmetrical
* Add readme to Mbsurfer DS75 keymap
* Fix Mbsurfer DS75 keymap image
* Clean up mbsurfer DeltaSplit75 keymap, add layer overview comments
* Fix volume down and add mute to fn layer
* Restructure kbd75 to support multiple revs
* add rev2 files
* fix config comments
* try and avoid duplicate code for LAYOUT macros
* keep the same layouts for rev2 for info.json
* Add QMK Configurator support for the numpad layout
* update readme to talk about rev2
* Create keymap.c
Modified the default to be way more like a pok3r, already clear that it needs a better ctrl location.
* Delete keymap.c
* Create keymap.c
Modified the default keymap to be more like a pok3r, clearly needs a better ctrl location and probably some other tweaks.
* Add files via upload
* Update keymap.c
Parenthesis correction.
* Parenthetical cleanup
Forgot one...
* Mods and numpad; cleanup
Rework mods and numpad layer, remove superfluous declarations
* comment define devlayer
* Create readme.md
Background and intention.
* Updated to fit example
* Update readme.md
* Update rules.mk
* Update config.h
* Updated includes
Replaced:
#include "iris.h"
#include "action_layer.h"
#include "eeconfig.h"
With:
#include QMK_KEYBOARD_H
* Update rules.mk
Removed RGB enable declarations
* Update rules.mk
* Update keymap.c
Spaced out on MINS and EQL.
* Update rules.mk
Removed unnecessary block.
* Remove the RGB call
Make would fail because of the RGB call that wasn't anywhere but here, cleaned that up from the default config.
* Update keymap.c
Added [ and ] since I'd forgotten them originally...
eucalyn
skullY
orbitingorca
tong92
Nicholas Shaff
Biacco42
mechmerlin
ishtob
MakotoKurauchi
MechMerlin
Erick Ozaki
Christopher Sexton
Yan-Fa Li
marksard
James Underwood
Greg Bowler
ArpinFidel
Fred Silberberg
Dave Brown
Drashna Jaelre
Xyverz
Olivier Poitrey
techsock
Takeshi ISHII
Joshua Magee
Danny
wanleg
Kenny Hung
Konstantin Đorđević
Max Rumpf
Dylan Khor
bakageta
rbong
Will
Brosseau Valentin
Mikkel Jeppesen
J.net
Daniel Shields
lucwastiaux
NeonSpork
Len Trigg
Jacob Jerrell
Stephen Tudor
Michael Pio
Lukas Klingsbo
Kenneth Aloysius
noroadsleft
lebastaq
Fabian Topfstedt
Seth Barberee
Jarred Steenvoorden
Merlin04
Jack Humbert
Taylor Gonzalez
Michael Zoech
Batuhan Baserdem
yiancar
scott-t-wilson
Dan
That-Canadian
Mark Kuba
Konstantin Lepa
Ally Parker
Damien
Andreuha
ichi
Hannes Egler
TerryMathews
zjpxshade
Wilba6582
ajp10304
Callum Oakley
Michael F. Lamb
frederik-h
Eric
Luma
Maarten Dekkers
QMK Bot
Enochen
Wayne Chen
satt99
Josh Hinnebusch
Erez Zukerman
MxBlu
epaew
yttyx
zwnk
FireBazooka
Brendan Wrafter
omkbd
Ethan Madden
zerovectorspace
Markus Weimar
Cory Shaw
sgugler
Skyler Lewis
rfvizarra
fordmr
Albert Seo
Derek Tracy
