* Added xeal60 via clone of lets split
* Delete removed other keymaps
* Basic keymap (no FN). Compiles.
* Removed NP_STAR and NP_SLSH.
* Removed "debounce_algo = manual" in all keyboards with CUSTOM_MATRIX = yes.
* Changed order of rules in TMK. Documented feature.
* Fixed missing whitespace in debounce documentation
Table wasn't working due to missing newline.
* Added bold in a few areas.
* DO NOT USE - Removed debounce from TMK.
* Remove accidental xeal60 commit
* DO NOT USE - debounce successfully compiled.
* DO NOT USE Revert back to original API to support split_keyboards.
* Working eager_pk
* Whitespace cleanup.
* Restored debounce.h since there wasnt any real change.
* Moved debouncing_time variable to inside #if debounce
* Removed check for custom_matrix. We can safely include the debounce file for compilation when custom_matrix is used.
* Removed #include "matrix.h" from debounce.h
* Bug fix - was using MATRIX_ROWS instead of num_rows
* Fixed compilation error with debounce_sym_g
* Renamed DEBOUNCE_ALGO to DEBOUNCE_TYPE
* Malloc array in debounce_eager_pk, since split keyboards only use MATRIX_ROWS/2.
* Fix compile error in debounce_eager_pk
* Stricter, leaner DEBOUNCE_TYPE section in common_features.mk. Cleanup debounce_type.mk
* Migrate fn_actions for default keymaps
* Rename the Grave/Escape Shift masks
* No need for shift_esc_shift_mask
* Change breaks to return false
* Right align pointers
* Add default case
* Separate cases with empty lines
* NUBS_Z: initial version
Create a keycode that is normally Z, but KC_NUBS when tapped while Alt is being held.
This removes the possibility of using an Alt+Z shortcut.
* NUBS_Z: modification
Modify NUBS_Z macro to only use alternate operation if Right Alt is being held, rather than responding to either Alt key.
Also add QMK version keycode to System layer, Equals key.
* Remove unneeded breaks from process_record_user
* Macro refactoring
- removed G_RST and G_C10R macros
- updated G_BRCH macro
- outputs `master` if used while Shift is held down; or my git alias for the current branch otherwise
- updated G_FTCH macro
- outputs `git pull upstream ` if used with Shift; `git fetch upstream ` otherwise
- swapped `modifiers` variable for `get_mods()` function directly for checking modifier state
- swapped keymap-level modifier mask macros for QMK-core mod mask macros (thanks vomindoraan #4337)
- renamed MODS_RALT_MASK to MOD_MASK_RALT (more consistent with the above change)
* Update readme files
* set bootmagic from no to lite and put in a note in the readme
* use pragma once
* discovered a compile error when testing with default keymap. The inlined led functions need to be externed in the .c file
* might as well turn on mouse keys as well
* [Keymap] Adding buhearns keymap
* Removing deprecated function
with fauxpark's help
* Update readme.md
* Switching to UNICODE_ENABLE
with drashna's help
* Update rules.mk
* Update config.h
* Update config.h
Tidying up
* Update keymap.c
Tidying up
* Update readme.md
Tidying up
* Update rules.mk
Tidying up
* Removing GESC and adding TILD
* initial commit with edits to vanilla code
* Add QMK Configurator support
* add an appropriately generated keymap
* pins, matrices, and features added in
* moved it all to a regular directory. It's called regular as that's what it's called in the group buy. In the future we will have other directories for the other PCBs that are delivered to customers.
* forgot caps lock led support
* Update keyboards/doro67/regular/keymaps/default/config.h
Use the NAME
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update keyboards/doro67/regular/readme.md
Be more explicit
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Add stm32f072 base ck4x4 to handwired
* add prints
* Save these tries
* Save changes again
* Working hadron oled
* OLEd working but ws2812b still iffy:
* save another try
* Encoder feature + OLED
* RTC code
* Implement clock setting mode
* Whitespace
* Encoder hooked up to working LED PWM code
* Add missing files
* eeprom changes
* Save changes
* Move i2c master
* Move satisfaction75 under cannonkeys
* Set proper default folder
* Revert some core changes
* Undo paved iris changes
* Reorganize code for maintainability and prep for new features
* Add starting code for clock OLED mode
* Clock set mode finished
* Add custom encoder modes
* Actually add VIA keymap
* Gate to only 072
* fix gate for only 072
* Update header guards and includes
* Update i2c selection strategy
* Update board.c to handle software reset to DFU
* add dusty keymap
* change keymap folder to match my github username
* initial keymap completed in comments only
* layout without NAV completed in comments only
* disable Command to prevent interference with Space Cadet keys
* switch _ and \ in the symbol layer
* Layers complete through _NAV
* add thumb keys to _NAV
* complete _NUM
* all layouts complete; still needs `process_user_record()`
* completed first draft of keymap; still needs config.h to match
* corrected keycodes for Mac macro-volume keys
* fix Mac mute keycode
* add missing Mac keycodes for previous and next track
* placeholder for qwerty layout, not yet completed;
remove unnecessary breaks;
add todos
* eliminate Preonic branch before switching to Minidox branch:
• delete dustypomerleau Preonic keymap folder
• complete keymap.c (QWERTY layer, vanilla numbers layer)
TODO:
• add preferences to config.h
• complete the README
* edit commented keymap diagrams for clarity in dual function keys
* define initial config.h and add rules.mk for mouse key support
* fix redundant line after implementation of tap_code()
* fixed key_timer declaration, added README and rules
* formatting of keymap
* add CTPC to config
* cycle thumb keys to favor center position
* modify config.h for temporary Pro Micro compatibility
* remove superfluous call to use serial; homebrewed mod tap keys are still broken with OSL
* merge _SYS and _MEDIA on new Z_SYS key
* ALT_OP example of new MT macro complete
* initial narze-inspired MT fixes in PRU
* add (currently superfluous) custom keycode for the _SYS layer
* rudimentary `OSL` symbol macros that immediately register the mod and fail to reset the oneshot layer, but do output the proper keys—fix both of these things
* remove permissive hold to improve tapping performance
* remove calls to `clear_oneshot_layer_state()`, as they have no effect inside `process_record_user()`. Tapdance appears to be the way forward.
* final commit before tapdance code; correct layout in comments
* initial tapdance code for shifted mod taps
* add numeric and ergo NUM layers and pinky shifts for keycuts
* add TD() wrappers to tapdance codes and clean up commented layout guides
* add faux return to cur_dance to allow compilation - TODO: research what the default clause should be in cur_dance
* update commented schematics for better readability
* add backspace and delete to lockable layers, Z_SYS -> SYS_Z for consistency, fix schematic errors
* add `DOUBLE_SINGLE_TAP` to tapdance cases to allow doubling of the single tap character without waiting tapping term
* remove reduced oneshot tapping toggles
* update README
* newline tweak :)
* Update keyboards/minidox/keymaps/dustypomerleau/keymap.c
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* Update keyboards/minidox/keymaps/dustypomerleau/config.h
Co-Authored-By: dustypomerleau <dustypomerleau@users.noreply.github.com>
* remove `PREVENT_STUCK_MODIFIERS`, as this is default behavior
* Tweaks to default 1up60hte layout + support for HHKB style layout
* Added changes to layouts
* Fix config.h
* Fixed errant KC_NO in layout
* Added readme to keyboard... Will update with images/store link when avail.
* Update to use LAYOUT_60_hhkb default layout
* md formatting fix
* Update keyboards/1upkeyboards/1up60hte/readme.md
Co-Authored-By: bubnick <bubnick@users.noreply.github.com>
* Update keyboards/1upkeyboards/1up60hte/readme.md
Co-Authored-By: bubnick <bubnick@users.noreply.github.com>
* Added layout to rules.mk, fixed layout to be compatble with community HHKB keymaps
* Added image, updated store page to readme
* Add userspace files for vosechu
* Code review corrections
* Few more code review corrections
* Initial add of Laptreus code
* Initial add of Laptreus code
* Adding last punctuation to default
* Add some debug suggestions to the debug readme
* Fixes for PR feedback
* Fixing capitalization of readme files
* update auto detect connection logic
* remove unneeded file
* make an appropriate readme
* amend the LAYOUT macro to adhere to new QMK standards and create an appropriate keymap
* add QMK Configurator support
* a bunch of changes lol
* delete unneeded routines
* update date to modern times
* remove a useless prototype
* add in drashna's suggestions on PR
* added keyboard jj4x4, a shorter version of the jj40
* removed useless file
* edited jj4x4 readme.md
* optimized array size in jj4x4 config.h, removed reference to jj40 layouts from rules.mk
* removed custom matrix for this ps2avrgb board, refactored column and row pins
* fix a bug in which the physical matrix did not match the physical layout. Top row was missing 1 key and bottom row had 1 extra key
* amend keymap to account for the new physical matrix
* 6.25u space bar is actually supported, so add a new layout that supports this
* fix keymap readme to no longer need the cautionary warning
* Moving sentraq keyboards to sentraq subdirectory.
* Updating readme markdown to correct make commands.
* Updating s60_x references to point to the new vendor subdirectory.
* Fixed stripped spaces in markdown.
* Updated help information in s60_x readme and linked to additional documentation.
* Make QMK Configurator work with e7-v1
This adds the missing info.json file for the e7-v1 keyboard which I
forgot to add to the original PR.
This allows to see the correct layout in QMK Configurator.
* Fix the ISO layout
The ISO layout has one extra key (hash/tilde) on row 3 right before
the enter key.
The e7-v1 PCB has this key wired at the same switch as the ANSI
backslash (since this switch is not used in ISO).
The tkl_ansi layout had an incorrect value for the grave/tilde key, and
number row keys were misnumbered. This fix removes the typo and adds the
missing K1C key.
* Fix mixed tabs and spaces in adb_usb and m0110_usb makefiles
* Fix typos in converter build options
* Tweak ordering and spacing in converter makefiles
* initial commit
* Do a nice write up for readme
* establish switch matrix and physical layout
* Put in the pins that are used
* QMK configurator support and keymap
* set bootloader to caterina because pro micro boohoo
* add ortho_4x4 support for user spaces
* got the columns reversed lol
* Tweaks to default 1up60hte layout + support for HHKB style layout
* Added changes to layouts
* Fix config.h
* Fixed errant KC_NO in layout
* Added readme to keyboard... Will update with images/store link when avail.
* Update to use LAYOUT_60_hhkb default layout
* md formatting fix
* Update keyboards/1upkeyboards/1up60hte/readme.md
Co-Authored-By: bubnick <bubnick@users.noreply.github.com>
* Update keyboards/1upkeyboards/1up60hte/readme.md
Co-Authored-By: bubnick <bubnick@users.noreply.github.com>
* Added layout to rules.mk, fixed layout to be compatble with community HHKB keymaps
* Create ISO HHKB keymapping for GH60
* Add media controls to Fn layer
* Use M(x) instead of F(x), add Copyright text
* Add README for additional information about TMO50 features/quirks
* Add indicator LED code
* Move indicator code to tmo50.c
* move over kbd19x into the kbdfans directory
* move over kbd4x into the kbdfans directory
* move kbd66 into the kbdfans directory
* move the kbd6x into the kbdfans directory
* move kbd8x into the kbdfans directory
* move kbd75 into the kbdfans directory
* move kbd67 into kbdfans directory
* add a fairly sparse readme for kbdfans directory
* update make instructions for keyboards and add the Complete Newbs Guide to readmes that was missing it
* get kbd75 compiling again
* remove repetitive #defines of KC_NO and KC_TRNS when QMK_KEYBOARD_H is already included in KBD75
* add links to kbdfans readme
* fix some readme formatting
* there is no reason to have two different keymaps with such a small difference, condensing to one
* turning on backlights by default
* enable backlight by default for kbd66
* noticed that the kbd75 had caps lock led code in every keymap. Moved it out to the keyboard.c so everyone can partake.
* Update keyboards/kbdfans/kbd66/readme.md
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* update readme link ordering
* Added QMK Config for Sentraq Number Pad keyboard.
* Sentraq Number Pad documentation cleanup.
* mend
* Added json for configurator.
* Small documentation tweaks.
* Updated the layouts to use the default layouts that match.
* Uncommended user level functions in keymap, left custom keycode/macro code commented but documented why.
* Switched to #pragma once from #ifndef structure in header file.
* Moved Sentraq number pad to sentraq creator directory.
* Renamed sentraq_number_pad to number_pad now that it's nested in the sentraq directory.
* Updated references inside the files for the keyboard rename and nesting.
* Adds keymaps for muzfuz
* Remove unused keys from adjust layer
* Bring in line with current QMK standards.
* Adds Preonic and adjusted Planck keymaps
* Make changes per review request
* update reset sequence info
* fix my rgb underglow led number flub
* add a more sensible keymap
* add caps lock led support
* remove unused #define
* swap the spacebar sizes around to match the space65
* use vomindoraan's suggestion in PR to use IS_LED_ON
* fixed arrow keys and left control
* added right shift
* latest version
* reverted arrow keys
* edited readme
* added osu layer
* updated osu layout
* updated osu layout
* added full arrow keys to osu layout
* in case i mess up creating macros
* added the best meme key in the world
* added plover steno layer
* updated boy314 layout
* removed unused layers
* added boy314 xd75 layout, inspired by preonic layout
* added boy314 xd75 layout, inspired by preonic layout
* version 2 of boy314's xd75 layout
* added readme notes
* updated readme for boy314 xd75 layout
* qwerty support, brackets on bottom row, caps lock underglow
* fixed readme/
* small changes to allow merging
* minor changes to format
* fixed up default readme
* added numpad and tweaked bottom row
* updated xd75 and preonic rev3 keymaps
* added initial half n half files
* fixed .h file
* updated names
* fixed layout in halfnhalf.h
* fixed manu name, changed bootloader in rules.mk
* removed redundancies in preonic and xd75 layouts
* readme updated
* initial commit
* get rid of vanilla code, and fix formatting
* write up a nice looking readme
* add in pins and enable features
* define keymap and switch/physical matrix
* add QMK Configurator support
* switch to bootmagic lite to decrease file size
* Move boards to cannonkeys and share resources
* Share common files between cannonkey boards
* Fix ortho60 keymap
* update LED numbers
* Add RGB keys to Ortho60 and Ortho48
* Add Backlight control to default layout Ortho60 and 48
* Remove unnecessary ws2812.c SRC from rules.mk
* Make Default standard layout
Move Mac OS layout to a separate layout. Basically Mac has the Alt and GUI keys swapped
* Fix typos
* Use Bootmagic keys instead of separate MacOS keymap
* Create ISO HHKB keymapping for GH60
* Add media controls to Fn layer
* Use M(x) instead of F(x), add Copyright text
* Add README for additional information about TMO50 features/quirks
* handwired/space_oddity: refactor
- config.h: updated to use #pragma once include guard
- rules.mk: replace `?=` with `=`
- space_oddity.h:
- updated to use #pragma once include guard
- layout macro KEYMAP renamed to LAYOUT
- default keymap:
- updated to use #include QMK_KEYBOARD_H
- replace references to Planck keycodes
- replace fn_actions-powered layer switch keycode
- rebuild keymap block comments
- keymap layers now use short-form keycodes
- refactor action_get_macro keycodes into process_record_user
* handwired/space_oddity: Configurator support
* handwired/space_oddity: readme cleanup
- update readme to better conform with QMK template
- fixed the make command.
* Add the e7-v1 keyboard
The e7-v1 is a 75% keyboard made by Exclusive based on an Atmega32u4
pub with RGB lights on top and backlighting.
This PR add supports for the regular ANSI layout and ANSI split
backspace layout. No ISO yet :(
* My e7-v1 keymap
Difference from base layout:
* split backspace
* Home & End on last keys of row 0 instead of Insert/Del
* Fn is on the End key when hold
* supports both a windows/linux keymap and osx keymap
* layer change is reflected in the rgb leds of the logo
The following layouts were being rendered with 6.75u Spacebars instead of 7u:
- LAYOUT_ansi_blocker_7u
- LAYOUT_ansi_blocker_7u_small_lshift
- LAYOUT_ansi_blocker_7u_small_bspc
- LAYOUT_ansi_blocker_7u_small_lshift_small_bspc
- LAYOUT_iso_blocker_7u
This commit corrects this issue.
Flagged by yanfali on QMK Discord.
- layout macro and keymap layers refactored to more closely resemble physical keyboard layout
- added layout mockup to alice.h
- correct info.json data (was missing a key)
* Added southpole keyboard
added southpole keyboard folder and files including keymaps folder. Keymaps have errors and will not compile yet
* Add files via upload
added manufacturer and product name and description
* Update config.h
* Add files via upload
changed formating added layer
* cleaned up files, fixed foobeard keymap, and added maker info
* fixed keymap files
* Update keyboards/southpole/keymaps/foobeard/keymap.c
Co-Authored-By: ericduns <ericduns@gmail.com>
* Update keyboards/southpole/keymaps/default/keymap.c
Co-Authored-By: ericduns <ericduns@gmail.com>
* made changes fixing outdated lines and added readme.md
* made requested changes for pr to all files
* removed vs code and added new line to southpole.h
* moved some stuff around on my iris layout, but don't expect a lot of changes in the future
* good working setup
* [keymap] some mods to my (omgvee) Helidox keymap
* updated zlant keymap with diagram
* made edites to last post
* noticed slight error in default keymap due to my own mistake. fixed to be the same as default
* fixed spacing in second base layer second row from left
* Added xealousbrown keyboard.
* Changed to pragma once in config.h
* Update keyboards/handwired/xealousbrown/rules.mk
Added bootloader.
Co-Authored-By: alex-ong <the.onga@gmail.com>
* Update keyboards/handwired/xealousbrown/config.h
Commented out IS_COMMAND() since it is already default value.
Co-Authored-By: alex-ong <the.onga@gmail.com>
* Remove duplicated or unnecessary definitions in config.h and rules.mk
* Use IS_HOST_LED_ON() macro
* Add mouse acceleration to kbd6x:konstantin keymap
* Clear and restore mods when sending macros
* Make SEND_STRING_CLEAN a config option
* Add NO_ACTION_ONESHOT to userspace config
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4
* Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions
* Update docs to use get_mods() instead of keyboard_report->mods
* Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test
For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist
* Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt)
* Move Iris via support to Via keymap
And move it out of the main keyboard files
* Actually add via keymap folder
Because using git when you're tired is apparently a very bad idea, and you do stupid things like not running git add
* Clean up config.h file for iris via keymap
* Add default value for IS_COMMAND for COMMAND feature
* Cleanup and consistency
* Update Templates to reflect change
* Fix IS_COMMAND in template
* Fix IS_COMMAND define
* Use consistent IS_COMMAND block in templates
* Remove unnecessary `#undef IS_COMMAND` directives
* Fix compile issue on orthodox
* Reomve IS_COMMAND option for newer boards
* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting
* Remove a couple of additional IS_COMMAND defines
* Remove remaining redundant IS_COMMAND definitions
* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin
* Remove multiple empty lines in modified config.h files
* Update additional boards
* Reomve IS_COMMAND from newer boards
* Update Alice keyboard
* Remove IS_COMMAND from additional boards
Jan 24th edition
* Basic Fanoe support (no LED yet)
* Enable RGB lights
* Backlighting support
* Change to reflect Wheat Field brand of Fanoe PCB
* Hot swap variant
* Fix review comment issues
* Fix review issues
* Corrected rules.mk
* Change naming to avoid using possibly copyrighted names
* Added info.json
* Corrected manufacturer name in info.json
* Keymap updates
* Add layout for use with ws2812b and such
* Fixes based on code review
I worked on those keymap to simplify the use of 60% keyboards for
coders. Instead of trying to mimic planck, this keymap remove
raise/lower layer complexity and keep some important sign keys for coder
in the upper right side pretty much the same way as they are on a full
keyboard.
A karabiner configuration is also provided to mimic most of the keymap
features on the macbook internal keyboard for when you are forced to use
it.
* Custom keymap.
* Fix magic layer, enable Unicode.
* Update README.
* Make Unicode config change keymap-local.
* Move magic to AltGr, simplifying layout.
* Changes per Drashna.
* Fix magic+esc = backtick!
* Change reset implementation per Drashna's suggestion.
* Add a few more symbols so long as the commit is open - √ℜℂℤ⊙ℚℕ and the like.
* Typo fix.
* Slight simplification, drop an extra variable.
* Added busby222 config
* Fixed bug with leftover colemak and dvorak layouts
* Fixing dumb mistake
* Minor tweaks to layout. Need to use at work tomorrow to make more adjustments
* Added mouse controls for raised layer
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update config.h
Added mouse specific settings for smoother mouse movement (default is sort of hard to use)
* config.h cleanup
* Lowering max mouse speed (personal preference)
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update keymap.c
* Update config.h
* Update rules.mk
* Added MIDI layer
* Switched the Adjust layer to an MO call
* Update keymap.c
* Fixing bugs related to midi layer
* Changed "Caps Lock" ctrl to RCTRL for use in VirtualBox
* Added shovelpaw keyamp
* Removed deprecated QUANTUM_DIR code block
* Switched midi layer to be only active when held
* Addressing requested changes
* Removed unnecessary include statement
* initial commit
* move the original kbd67 stuff into its own directory, rev1
* get rid of vanilla cookie cutter code
* put in the switch matrix pins, backlight pin, and rgb underglow pin. Number of underglow LEDs is questionable.
* switch matrix created for hotswap
* create a basic keymap for testing
* make info.json for QMK Configurator support
* rename kbd67 due to compile error
* kbd67 generic readme file
* fix make instructions for the new rev1
* comment out unneeded rgb light #defines
* Update keyboards/kbd67/readme.md
Add an extra space for proper markdown rendering
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update keyboards/kbd67/hotswap/hotswap.h
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* Update keyboards/kbd67/hotswap/keymaps/default/keymap.c
Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com>
* use pragma once
* proper format of MechMerlin
* Cluecard: refactor
- renamed layout macro KEYMAP to LAYOUT
- reformatted layout macro to more closely resemble physical device layout
- keymaps now use #include QMK_KEYBOARD_H
- config.h files updated to use #pragma once method
- deleted outdated QUANTUM_DIR code blocks from rules.mk files
- white space changes on rules.mk files (alignment/readability)
* Cluecard: Configurator support
* Cluecard: readme update
- added image
- updated Docs links
* Clueboard 66% HotSwap: corrected matrix and Configurator data
- removed k31 and k84 from LAYOUT
- both appear to be unsupported for this PCB according to images on clueboard.co
- updated block comment mock-ups to match changes
- rebuilt info.json file
- delete removed keys from default keymap.c
* Clueboard 66% HotSwap: readme update
- fix make example
- updated Docs links
* Clueboard 66% HotSwap: 66_ansi keymap update
Updated to use #include QMK_KEYBOARD_H
* Clueboard 60% refactor
- renamed layout macro KEYMAP to LAYOUT_all
- renamed layout macro KEYMAP_AEK to LAYOUT_aek
- removed redundant KC_TRNS definitions from keymaps
- all keymaps now use #include QMK_KEYBOARD_H
* Clueboard 17%: refactor
* Clueboard 17%: Configurator support
* Clueboard 17%: update Docs links in readme
* Cleanup the 2x1800 files
* Update Clueboard 60% to standard matrix
* Update the clueboard default keymaps
* Refresh and update clueboard 17
* Add the 66% hotswap to Clueboard's readme
* Clarify the 66% hotswap's readme
* change the image to imgur
* Update the clueboard 66 to follow modern standards
* update clueboard 66_hotswap to follow modern practices
* Move the logo to imgur
* update clueboard/card to follow modern practices
* remove clueboard/66 as a valid make target
* Address comments in #4902
* fix user keymaps after the changes
* Added TGR Alice keyboard support
This keyboard uses ps2avrGB firmware, so I used the same matrix
Bootmapper Client was using and was able to flash it appropriately.
* Refactor alice to use QMK core
* Fixed markdown line breaks on TGR Alice readme
* handwired/retro_refit: refactor
- retro_refit.h
- updated to use #pragma once include guard
- refactored layout macro to not auto-prepend KC_ to keycodes
- renamed to LAYOUT (from KEYMAP)
- aligned for readability
- default keymap.c
- now uses #include QMK_KEYBOARD_H
- removed unused fn_actions and action_get_macro blocks
* handwired/retro_refit: Configurator support
* handwired/retro_refit: readme update
Updated readme to format of current QMK template.
* Create ISO HHKB keymapping for GH60
* Add media controls to Fn layer
* Use M(x) instead of F(x), add Copyright text
* Create initial firmware for TMO50
* Correct year and author
* Fix repos README
* Remove unnecessary code
* Change include guard in tmo50.h
* Plain60: remove redundant include guard from plain60.h
Superseded by #pragma once.
* Plain60: add Docs links to readme file
* Plain60: Configurator support
* new hhkb keymap implementing movement layer + comfort features
* Apply suggestions from code review
Co-Authored-By: schaefer-dev <schaefer.dev@gmail.com>
* removed deprecated function action_get_macro and mousewheel configs that are no longer used
* handwired/reddot: refactor
- reddot.h
- updated to use #pragma once include guard
- renamed layout macro KEYMAP to LAYOUT
- refactored arguments to more closely resemble physical layout
- aligned for readability
- keymaps/default/keymap.c
- now uses #include QMK_KEYBOARD_H
- updated include path for keymap_french.h
- refactored to use short keycodes
- aligned for readability
* handwired/reddot: Configurator support
* handwired/reddot: readme update
- update readme to current QMK template
- add KLE permalink to my best guess at the layout
* Initial support for TKC Candybar
* Correct FN layer issue
Both shift keys were overloaded. Moved Caps Lock to FN + C.
* Update keyboard description in config.h.
* Info.json
* Update project information
* Update keyboards/candybar/readme.md
Co-Authored-By: TerryMathews <terry@terrymathews.net>
* handwired/qc60: refactor and Configurator update
- correct layout macro name (LAYOUT_ANSI_DEFAULT to LAYOUT_ansi_default)
- add layout data for remaining layout macros
- correct ISO layout macros (neither had a split left Shift)
- refactor LAYOUT_iso_alt (place KC_NUHS key on home row; consistent with LAYOUT_iso_default)
- proto.h refactored to use #pragma once include guard
* handwired/qc60: keymap refactor
- delete redundant KC_TRNS and KC_NO aliases
* handwired/qc60: readme update
- update header (made consistent with QMK template)
- update Docs links (Newbs Guide; grammar)
* handwired/ortho60: Configurator update
- correct labels for Up and Right keys
- add layout data for LAYOUT_1x2uC
* handwired/ortho60: readme update
- update readme file to use QMK template
* handwired/ortho60: deleted DEFAULT_FOLDER rule
Not needed as the keyboard currently has no revisions.
* TKC1800: refactor
- tkc1800.h
- updated to use #pragma once
- visual alignment
- update config.h files to use #pragma once
- update all keymaps to use #include QMK_KEYBOARD_H
- delete redundant mod mask, KC_TRNS, and KC_NO definitions
- reformat keymap layers for readability
- add block comment for Function layer in default keymap
- delete commented action_get_macro code blocks (deprecated function)
- update files to better conform with QMK coding conventions
- update smt keymap to use set_single_persistent_default_layer (instead of persistent_default_layer_set)
- replace instances of `?=` with `=` in rules.mk
* TKC1800: Configurator visual fixes
- correct key sizes and positioning
- reformat file so each physical key object has its own line for readability
- update and add `label` keys for readability
* TKC1800: readme update
- fix image gallery link
- update Hardware Supported and Hardware Availability lines
- update make example (add :default suffix)
- update QMK Docs links (Newbs Guide; grammar)
* Add missing semicolons to smt keymap
Discovered the LAYOUT_compact macro didn't compile in QMK Configurator. Realized the reason for that was that it automatically prepends `KC_` to every keycode received.
Renamed the macro to LAYOUT_kc so Configurator will ignore it.
Also changed the file to use the #pragma once include guard because I was in here anyway.
* change VENDOR_ID, PRODUCT_ID, and DEVICE_VER as step one in getting VIA support
* fix v1 product id
* VIA doesn't use the version, so we need to encode it into PRODUCT_ID
* Eliminate separate slave loop
Both master and slave run the standard keyboard_task main loop now.
* Refactor i2c/serial specific code
Simplify some of the preprocessor mess by using common function names.
* Fix missing #endif
* Move direct pin mapping support from miniaxe to split_common
For boards with more pins than sense--sorry, switches.
* Reordering and reformatting only
* Don't run matrix_scan_quantum on slave side
* Clean up the offset/slaveOffset calculations
* Cut undebounced matrix size in half
* Refactor debouncing
* Minor fixups
* Split split_common transport and debounce code into their own files
Can now be replaced with custom versions per keyboard using
CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes
* Refactor debounce for non-split keyboards too
* Update handwired/xealous to build using new split_common
* Fix debounce breaking basic test
* Dodgy method to allow a split kb to only include one of i2c/serial
SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only
that driver code in the binary.
SPLIT_TRANSPORT = custom (or anything else) will include neither, the
keyboard must supply it's own code
if SPLIT_TRANSPORT is not defined then the original behaviour (include
both avr i2c and serial code) is maintained.
This could be better but it would require explicitly updating all the
existing split keyboards.
* Enable LTO to get lets_split/sockets under the line
* Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE
* Remove avr-specific sei() from split matrix_setup
Not needed now that slave doesn't have a separate main loop.
Both sides (on avr) call sei() in lufa's main() after exiting
keyboard_setup().
* Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT.
* Add comments and fix formatting.
* Crawlpad: delete kbfirmware JSON file
* Crawlpad: refactor
- config.h and crawlpad.h updated to use #pragma once method
- layout macro renamed from KEYMAP to LAYOUT_ortho_4x4
- default keymap now uses #include QMK_KEYBOARD_H
- deleted deprecated action_get_macro function
- cleanup rules.mk file
- add LAYOUTS = ortho_4x4 to rules.mk
* Crawlpad: Configurator support
* Crawlpad: readme update
- update image link to direct link
- fully update Docs link line
- delete reference to deleted kbfirmware JSON file
* Add encoder support
* Add VIA support to Iris Rev. 3
* Update pinout and disable mouse keys to free up space
* Rollout VIA support to all Iris revisions
* Update default keymap
* Update vendor ID
* Add kbd6x:konstantin keymap
* Prevent tap dance from sending LShift as a weak mod in KBD6X
* Move config.h and rules.mk definitions into userspace
* Add UC_WIN to UNICODE_SELECTED_MODES
* Temporarily use Bootmagic until Command is fixed
* Move common behavior from keyboards into userspace
* Update kbd6x:konstantin keymap and userspace
* Make a RCTRL layer in kbd6x:konstantin
* Make KC_ESC turn off layers
* KC_ESC turns L_FN off only if it was locked on
* Add missing record->event.pressed checks
* Move numpad toggling logic into function
* Disable Bootmagic, enable KEYBOARD_SHARED_EP with Command
* Add support for THE50
A 50% custom keyboard designed and produced by LazyDesigners
* THE50 code-improvement
Implement the changes suggested by noroadsleft.
* changed ortho keymaps and userspace
* changed prime_o keymap
* changed userspace
* optimized keymaps and userspace
* removed permissive hold as it doesn't seem to do anything
* defined TAPPING_TERM in userspace config.h
* Commited into clean repo
* Gergo initial release
* Cleaning up
* Cleaning up
* Update readme.md
* Updated image, fixed MD formatting, added clairity
* Moved keymap to keyboard subdir, modified rules.mk
* Cleaned header guards
* Cleaned header guards. Read the rest of the PR comments
* Update keyboards/gergo/keymaps/default/keymap.c
Co-Authored-By: germ <jeremythegeek@gmail.com>
* Update keyboards/gergo/readme.md
Co-Authored-By: germ <jeremythegeek@gmail.com>
* Moved makefiles to keymap mod-area-thingy-with-overrides
* Update rules.mk
Slow the roll on the defaults while I wait for merge
* Update rules.mk
* Cleaning cleaning cleaning
* More housekeeping. Keeping optdefs
* moved keyboard specfic conf to config.h. Can we merge yet?
* added info.json
* adds proton c base
* fixes custom matrix include
* adds readme.md
* initial proton coversion, no pin mapping
* start of mcu selection
* add pin mapping and sweet16 test
* add at90 to list
* disable backlight, fix d7
* update flag names
* doc updates
* proton c update for mcu selection
* initial prime_o commit
* Cleaned up comments, other things.
* Update bakingpy 4x12 keymap and add test mode for debugging/development (#4810)
* Keymap: ave-63's iris layout (#4812)
* Updated keymap to use standard seven-underscore KC_TRNS notation
* initial prime_o commit
* Cleaned up comments, other things.
* Updated keymap to use standard seven-underscore KC_TRNS notation
* Downbubble: Configurator fix
Fix the visual key alignment and some typos.
* Downbubble: refactor
Rename layout macros:
- LAYOUT_downbubble_standard to LAYOUT_standard
- LAYOUT_downbubble_splitbackspace to LAYOUT_split_bs
- LAYOUT_downbubble_splitrightshift to LAYOUT_split_rshift
- LAYOUT_downbubble_splitnumpad to LAYOUT_split_numpad
- LAYOUT_downbubble_spliteverything to LAYOUT_all
Microsecond (us) delays are now handled by a busy wait loop according to MCU frequency. This replaces the system counter method which had an overhead of around 12us.
TC5 device and supporting routines removed as it was the old us delay counter.
wait_ms is now properly a macro to CLK_delay_ms.
wait_us is now properly a macro to CLK_delay_us.
Removed CLK_get_us as it has no use.
All calls to CLK_get_ms() have been replaced by timer_read64() with corrected typing.
All calls to CLK_delay_ms() have been replaced by wait_ms().
All calls to CLK_delay_us() have been replaced by wait_us() and timings verified or updated as needed after review on scope.
Corrected typing of variables using 64bit ms timer readings if needed.
* initial commit, this now mostly works
- RGB controls work
- Dynamic keymap still broken due to eeprom
- Via works
* STM32 eeprom update
- Update EEPROM emulation library to handle 8bit data like AVR.
- This library also allows for multiple page pairs resulting in greater EEPROM size flexibility
* hs60 changes
* HS60 hhkb added
* Update keyboards/hs60/v2/config.h
Co-Authored-By: yiancar <yiangosyiangou@cytanet.com.cy>
* Fractal: layout macro cleanup
Removed KEYMAP alias for LAYOUT_preonic_mit. Alias was unused, and the terminology usage is deprecated.
* Fractal: readme cleanup
Updated the line containing the documentation links in the readme.
* Fractal: disable preonic_mit community layout
QMK doesn't have a preonic_mit community layout at this time.
Disables preonic_mit as an option for community layout. Can be re-enabled when the layout is added.
* Numbrero: fix Configurator mismatch
Key object order in info.json didn't match the layout macro, leading to keys being assigned out-of-sequence.
* Numbrero: tidy
- white space changes in numbrero.h (alignment/readability/QMK conventions)
- minor changes to readme.md (grammar, mostly)
* Tradestation: tidy code
- correct JSON syntax on info.json
- visual key alignment on info.json
- white space changes on rules.mk and tradestation.h (readability/QMK conventions)
* Tradestation: readme refactor
Modify readme.md to more closely match QMK template.
* Tradestation: readme update
Update The Board podcast link for libsyn.
* S65-X: remove S65-Plus support
The original QMK codebase for the Sentraq S65-X actually supported both the S65-X and the S65-Plus. In the interim, the S65-Plus has been broken off into its own directory.
This commit removes support for the S65-Plus from the `keyboards/s65_x/` directory, as that code has been superseded by the code in the S65-Plus directory (`keyboards/s65_plus/`).
- deleted S65-Plus layout macros from s65_x.h and info.json
- deleted s65plus keymap directory
- removed references to the unused column pins
- removed the two unused columns for the switch matrices
- renamed switch K300 in LAYOUT_ansi to K301 (reflects matrix position)
- renamed switch K214 in LAYOUT_iso to K114 (reflects matrix position)
* S65-X: keymap refactor
- all keymaps now use #include QMK_KEYBOARD_H
- default and iso keymaps refactored for readability
- deleted redundant KC_TRNS and KC_NO keycode definitions from smt keymap
* S65-X: readme update
- updated Hardware Availability link
- updated Docs links
* S65-Plus: add LAYOUT_iso data
Adds LAYOUT_iso macro to s65_plus.h and info.json, and an ISO layout version of the default keymap.
* S65-Plus: refactor default keymap
- refactor for alignment/readability
- removed fn_actions code block
- add empty process_record_user block
* S65-Plus: readme update
- Hardware Availability link is now a hyperlink
- updated Docs links
* S65-X: enable 65_ansi and 65_iso community layouts
Thi commit allows the Sentraq S65-X to use the 65_ansi and 65_iso community layouts.
- LAYOUT_ansi renamed to LAYOUT_65_ansi
- LAYOUT_iso renamed to LAYOUT_65_iso
- added LAYOUTS rule to rules.mk
* Remove QUANTUM_DIR code blocks from keyboard rules
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect entire keyboards.
* remove QUANTUM_DIR code blocks from rules for default keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect default keymaps.
* remove QUANTUM_DIR code blocks from rules for user keymaps
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files that affect "user" keymaps. (It's actually any keymap
that isn't named `default`.)
* remove QUANTUM_DIR code blocks from rules for community layouts
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for community layouts.
* remove QUANTUM_DIR code blocks from rules for userspaces
This commit removes the deprecated "QUANTUM_DIR" code block from
rules.mk files for userspaces.
* Use standard KC_ALGR, remove language-specific redefinitions
* Use ALGR instead of ALTGR in BÉPO and Canadian multilingual keymaps
* Remove BE_LALT, BE_LGUI aliases
* adding default settings to support 3v ERM vibration motors
* set default settings of haptic motor for LV061228B-L64-A 2v LRA
* update ishtob keymap and fix config settings
* Added my Mechmini2 layout to qmk.
* Added more info to the readme.
* Made changes.
* Update keyboards/mechmini/v2/keymaps/lbibass_625_space/keymap.c
Co-Authored-By: lbibass <ewdries02@gmail.com>
* Update keyboards/mechmini/v2/keymaps/lbibass_split_space/keymap.c
Co-Authored-By: lbibass <ewdries02@gmail.com>
* Added brightness and volume controls to MechMini 625 layout.
* Make CRKBD keylogger output actually show tap keys
* check MT/LT for twinkling
* Add ortho 5x12 support for fractal keyboard
* Use newer interface for setting pins/ports
* Remove custom unicode methods
* Reomve unicode input info
* Odd rules issue
* Redefine REST note to be more pleasing
* Properly disable PM LEDs with GPIO commands
* Update gitlab CI yaml file
* Remove extra mod tap check
* Remove initial state on ergodox glow
* Rev6 Cleanup
* Fix KC_MAKE macro
* Update GitLab CI yaml file
* More GitLab CI changes
* One final GitLab CI change
* Remove unneeded unicode support
* Optimize KC_MAKE
* Change rgblight_get_mode's return type to uint8_t.
Since rgblight_get_mode() is just returning rgblight_config_t.mode,
it should match rgblight_config_t.mode's type: uint8_t.
* Update rgb_matrix_get_mode to return uint8_t.
It seems the led_mask is set incorrectly on the WhiteFox meaning that
the LED at C9-1 (the space bar) doesn't get lit. I can't see any reason
for this to be intentional so I am pretty sure it's a typo. At the very
least it fixes the space bar LED for me.
* Add my zeal60 keymap
* Temporarily remove failing community layout from zeal60 make rules
* Revert "Temporarily remove failing community layout from zeal60 make rules"
This reverts commit ffd0018fb1dcf3d5f90d4a226c437d4e85430cce.
* refactored cyclops keyboard project
Moved the files into a subfolder to allow consistency in preparation for additional commits to come in the future.
made some small adjustments to the configuration and keymap
* Update keyboards/westfoxtrot/cyclops/keymaps/default/keymap.c
Co-Authored-By: westfoxtrot <17062872+westfoxtrot@users.noreply.github.com>
* Update keyboards/westfoxtrot/cyclops/readme.md
Co-Authored-By: westfoxtrot <17062872+westfoxtrot@users.noreply.github.com>
* Update keyboards/westfoxtrot/cyclops/readme.md
Co-Authored-By: westfoxtrot <17062872+westfoxtrot@users.noreply.github.com>
* Update keyboards/westfoxtrot/cyclops/readme.md
Co-Authored-By: westfoxtrot <17062872+westfoxtrot@users.noreply.github.com>
* XMMX: matrix and keymap refactor
- xmmx.h updated to use #pragma once
- renamed LAYOUT_ansi_wk macro to LAYOUT_tkl_ansi
- renamed LAYOUT_ansi_wkl macro to LAYOUT_tkl_ansi_wkl
- renamed LAYOUT_iso_wk macro to LAYOUT_tkl_iso
- renamed LAYOUT_iso_wkl macro to LAYOUT_tkl_iso_wkl
* XMMX: Configurator support
* XMMX: readme update
* Add support for reset to bootloader
Chibios_test/STM32_F072_ONEKEY wouldn't reset to bootloader on a
compatible Discovery board because the Chibios library board file was
lacking the __early_init(void) function necessary to read the magic key.
Borrowed code from Clueboard 60, tested working.
* Remove board.chcfg
* Add provisional Helix implementation to test the quantum/split_common.
* copy keyboards/helix/serial.[ch] to quantum/split_common/
* Make serial.c a pure driver.
Remove buffer name and buffer size from serial.c. They should be placed in the caller(matrix.c, split_utils.c).
* remove quantum/split_common/serial_backward_compatibility.h
* Changed array serial_master_buffer to structure serial_m2s_buffer.
* Changed array serial_slave_buffer to structure serial_s2m_buffer.
* Change keyboards/miniaxe/matrix.c
I also made changes to quantum/split_comon/matrix.c to keyboards/miniaxe/matrix.c.
Note: I contacted @ka2hiro, creator of miniaxe, and I got permission to change keyboards/miniaxe/matrix.c.
* update history comment in quantum/split_common/serial.c
* Revert "Add provisional Helix implementation to test the quantum/split_common."
This reverts commit 168c82ef82c88e79979d9796bab9cc819cc2f685.
* fix keyboards/miniaxe/matrix.c, quantum/split_common/matrix.c
avr-gcc 4.9.[23] report error.
avr-gcc 5.4.0, avr-gcc 7.3.0 pass.
It is funny.
* update comment quantum/split_common/serial.c
* Reserve RGBLIGHT_SPLIT macro in quantum/split_common
* initial commit for Othi's HHKB layout keymap,
covering multiple modifiers hold and vim-like support and german characters. If there's
any suggestion i can be reached via mnpqraven on github or Othi#6661 on
discord
* added readme.md. TODO: update readme.md
* changed to default quantum keycode for `KC_TRNS`,
removed `PREVENT_STUCK_MODIFIERS`,
fixed tap dance using one shots
TODO: unicode implementation at https://docs.qmk.fm/#/feature_unicode
* keymap documentaion(readme) added
* unicode init
TODO: figure out what made the compose sequence not running
* update unicode and readme
* JD40: default keymap refactor
- Removed redundant action_layer.h include
- Refactored to use LAYOUT macro (from LAYOUT_kc)
- Refactored to use QMK-native keycodes
- Removed superseded TMK code blocks
* JD40: readme cleanup
Fixed and updated the links in the readme file
* Infinity60: refactor
- infinity60.h / keymap.c
- renamed layout macro to LAYOUT_60_ansi_split_bs_rshift; removed layout macro alias
- updated to #pragma once
- keymaps now use #include QMK_KEYBOARD_H
- keymaps/jpetermans/config.h updated to #pragma once
- keymaps/jpetermans/rules.mk deleted (complete contents were deprecated make instructions)
* Infinity 60%: Configurator support
* Infinity60: readme update
Updated the Docs links.
* Infinity60: bugfix depariel keymap
Had a typo.
* Infinity60: edit matrix.c
per @drashna
- https://github.com/qmk/qmk_firmware/pull/4707#issuecomment-449540676
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL
* add define USB_MAX_POWER_CONSUMPTION
* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk
rules.mk: add 4 Variables for compile control.
# Helix keyboard customize
# you can edit follows 4 Variables
# jp: 以下の4つの変数を必要に応じて編集します。
OLED_ENABLE = no # OLED_ENABLE
LED_BACK_ENABLE = no # LED backlight (Enable WS2812 RGB underlight.)
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight.)
LED_ANIMATIONS = yes # LED animations
config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define
* HELIX_ROWS define move from config.h to rules.mk
* add readme.md
* rename readme.md to readme_jp.md
* add readme.md and modify readme_jp.md
* change helix/ssd1306.c for select glcdfont.c position
* add variable LOCAL_GLCDFONT into each keymaps rules.mk
* Add iPhone/iPad LED support to Helix default keymap
* renumber _ADJUST for shrink program size
* Fix Helix i2c wrong bit rate
* add helix serial debug code
* serial debug macro move from config.h to serial.h
* helix serial.c debugging...
* refine debug macros
* add some comments
* add SELECT_SERIAL_SPEED
* add comments
* debugging sync_send/sync_recv
* add very high speed
* fix sync_send/sync_recv
* fix com. start and switch send/recv
* debug mode off
* remove debug codes
* temporary change, compiling C, C++ and ASM without -g
* helix config.h refine
* Revert "temporary change, compiling C, C++ and ASM without -g"
This reverts commit e9730cbbfd94fbcf792d992e3a1a65ad279b24d6.
* add change_reciver2sender()/change_sender2reciver()
This is a change to improve readability.
* txled, rxled off in matrix_init()
* add serial_send_packet() / serial_recive_packet()
This is a change to reduce object size.
* add serial_low() at ISR() top
* add __attribute__((always_inline)) to some functions
* modify serial_send_packet()/serial_recive_packet()
A little, object size reduction.
A little, speedup.
* add debug code to helix/serial.c
* Adjust sampling timing of serial signal being received
* add split_scomm.c/split_scomm.h and change serial.c/serial.h
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
* add split_scomm.c/split_scomm.h into helix/rev1
* reduce object size helix/rev2/matrix.c
* remove checksum check, add parity check
* force occur parity error for test
* parity test ok. remove test code
* change some comment & add skip code when buffer_size == 0
* serial.c: multiple types of transaction support
Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.
* helix serial master-slave transaction optimize
Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.
* add debug code for retry
* add comment into each config.h
* fix ISR status drop
* add a debug macro 'debug_retry_chg()'
* reduce led_test size
* remove debug code from helix/serial.c and etc.
* helix:five_rows change TAPPING_TERM value 140
* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.
- The difference with the original let's split's serial.c
- It's high-speed about 4 times.
- Stable bi-directional data transfer. (Helix need master to slave transfer)
- serial.h was divided 2 files, serial_config.h and sereial.h
- With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)
- USE OLD Simple APIs (compatible with let's split serial.c)
- files :
- serial_config.h -- hardware configuration (need include by config.h)
- serial.c/serial.h -- serial communication
- USE NEW flexible APIs. (Support multi-type transaction function.)
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
- files
- split_scomm.c -- communication buffer is defined in here. call by matrix.c.
- split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
- serial_config.h -- hardware configuration (need include by config.h)
To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
- serial.c/serial.h -- serial communication lower layer
- NEW APIs for serial.c / serial.h (The lower layer)
// Soft Serial Transaction Descriptor
typedef struct _SSTD_t {
uint8_t *status;
uint8_t initiator2target_buffer_size;
uint8_t *initiator2target_buffer;
uint8_t target2initiator_buffer_size;
uint8_t *target2initiator_buffer;
} SSTD_t;
// initiator is transaction start side
void soft_serial_initiator_init(SSTD_t *sstd_table);
// target is interrupt accept side
void soft_serial_target_init(SSTD_t *sstd_table);
int soft_serial_transaction(int sstd_index);
int soft_serial_get_and_clean_target_status(int sstd_index);
- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
move from old serial.c the following buffer and functions
serial_slave_buffer[]
serial_master_buffer[]
void serial_master_init(void)
void serial_slave_init(void)
int serial_update_buffers(void)
define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
* fix comment typo
* Fix the value of helix:five_rows variable HELIX_ROWS to 5.
* led_test rules.mk some change
* Separate common parts of helix/rev2/keymaps/*/rules.mk into helix/rev2/keymaps_common.mk
* helix/rev2/keymaps/edvorakjp/rules.mk use helix/rev2/keymaps_common.mk
* Separate common parts of helix/pico/keymaps/*/rules.mk into helix/pico/keymaps_common.mk
* Helix each keymap's using rgblight mode symbol instead magic number
No change in build result.
* Helix pico keymaps: make rgblight modes selectable.
No change in build result.
* Helix rev2 keymaps: make rgblight modes selectable.
No change in build result.
* fixed Helix froggy/keymap.c: invalid rgblight mode value 0 to 1 (=RGBLIGHT_MODE_STATIC_LIGHT)
* Deselect RGB_TEST and ALTERNATING in Helix rev2,pico keymaps config.h.
* Merge branch 'master' of https://github.com/qmk/qmk_firmware
* revert 955dcbc
* delete keymaps_common.mk
* add LAYOUT_kc() to keyboards/helix/pico/pico.h
* Standardize the Unicode EEPROM code
* Remove unicode init from process_record_* functions
* Add unicode init to where it belongs: matrix_init_quantum
* Move Unicode proccessing to unicode common
* Add audio feedback to input mode keys to drive konstantin up a wall
* Tap_code cleanup
* Update keycodes
* Update unicode documentation
* Update unicode keycodes for consistency/easier merge
* Add Audio Feedback section
* Remove Functions from feature page
And link to the file instead. Link to specific lines later on.
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* Because I missed it!
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* SPAAAAAAAAAACing
Co-Authored-By: drashna <drashna@live.com>
* Add BSD for future compatibility
* Thought I fixed that!
Co-Authored-By: drashna <drashna@live.com>
* non-breaking
Co-Authored-By: drashna <drashna@live.com>
* Considered that
Co-Authored-By: drashna <drashna@live.com>
* Yuuup
Co-Authored-By: drashna <drashna@live.com>
* consistency
Co-Authored-By: drashna <drashna@live.com>
* white spaces .... copied from elsewhere
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Update keycode defines
* Fix Linux Song
* Update all of the songs
* Cleanup
* Move and update check to ensure only one unicode method is enabled
* Update quantum/quantum_keycodes.h
* Update documentation
* Wordsmithing and cleanup
* Format unicode_common (#13)
* case alignment
* process_record_unicode_common → process_unicode_common
* Move song arrays into function where they're used, align preprocessor directives
* Swap the order of UC_WIN and UC_BSD
* Update Unicode docs
* Reorder Unicode mode stuff to match the order of input mode constants
* Fix capitalization in doc subtitle
* Readd BSD and OSX_RALT songs
* Reword BSD note in docs
* Readd BSD keycode description
* Reword explanation of input on different platforms
* Steal vomindoraan's input mode documentation
Co-Authored-By: vomindoraan (vomindoraan@gmail.com)
* Willingly give Drashna the rest of my Unicode doc improvements
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* remove merge artifacts
* Unicode common cleanup (#17)
* Standardize the Unicode EEPROM code
* Remove unicode init from process_record_* functions
* Add unicode init to where it belongs: matrix_init_quantum
* Move Unicode proccessing to unicode common
* Add audio feedback to input mode keys to drive konstantin up a wall
* Tap_code cleanup
* Update keycodes
* Update unicode documentation
* Update unicode keycodes for consistency/easier merge
* Add Audio Feedback section
* Remove Functions from feature page
And link to the file instead. Link to specific lines later on.
* Fix white spaces
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* Because I missed it!
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* SPAAAAAAAAAACing
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Add BSD for future compatibility
* Thought I fixed that!
Co-Authored-By: drashna <drashna@live.com>
* non-breaking
Co-Authored-By: drashna <drashna@live.com>
* Considered that
Co-Authored-By: drashna <drashna@live.com>
* Yuuup
Co-Authored-By: drashna <drashna@live.com>
* consistency
Co-Authored-By: drashna <drashna@live.com>
* white spaces .... copied from elsewhere
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Update keycode defines
* Fix Linux Song
* Update all of the songs
* Cleanup
* Move and update check to ensure only one unicode method is enabled
* Update quantum/quantum_keycodes.h
* Update documentation
* Wordsmithing and cleanup
* Format unicode_common (#13)
* case alignment
* process_record_unicode_common → process_unicode_common
* Move song arrays into function where they're used, align preprocessor directives
* Swap the order of UC_WIN and UC_BSD
* Update Unicode docs
* Reorder Unicode mode stuff to match the order of input mode constants
* Fix capitalization in doc subtitle
* Readd BSD and OSX_RALT songs
* Reword BSD note in docs
* Readd BSD keycode description
* Reword explanation of input on different platforms
* Steal vomindoraan's input mode documentation
Co-Authored-By: vomindoraan (vomindoraan@gmail.com)
* Willingly give Drashna the rest of my Unicode doc improvements
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* Rearrange process_unicode_common functions
* Make Unicode input mode constants (UC_*) an enum
* Simplify unicode_input_start/finish code
* Make the key used for WinCompose configurable
* Remove UC_OSX_RALT in favor of setting the key with UNICODE_OSX_KEY
* Update Unicode input mode doc
* Add descriptions and rearrange definitions in process_unicode_common.h
* Add registry command to Unicode docs + misc updates
* Reword an explanation in Unicode docs
* Add TODO comment
* Remove trailing whitespace
* Improve Cycling documentation
* Add Unicode Input method Cycling support (#19)
* Standardize the Unicode EEPROM code
* Remove unicode init from process_record_* functions
* Add unicode init to where it belongs: matrix_init_quantum
* Move Unicode proccessing to unicode common
* Add audio feedback to input mode keys to drive konstantin up a wall
* Tap_code cleanup
* Update keycodes
* Update unicode documentation
* Update unicode keycodes for consistency/easier merge
* Add Audio Feedback section
* Remove Functions from feature page
And link to the file instead. Link to specific lines later on.
* Fix white spaces
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* Because I missed it!
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* SPAAAAAAAAAACing
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Add BSD for future compatibility
* Thought I fixed that!
Co-Authored-By: drashna <drashna@live.com>
* non-breaking
Co-Authored-By: drashna <drashna@live.com>
* Considered that
Co-Authored-By: drashna <drashna@live.com>
* Yuuup
Co-Authored-By: drashna <drashna@live.com>
* consistency
Co-Authored-By: drashna <drashna@live.com>
* white spaces .... copied from elsewhere
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Update keycode defines
* Fix Linux Song
* Update all of the songs
* Cleanup
* Move and update check to ensure only one unicode method is enabled
* Update quantum/quantum_keycodes.h
* Update documentation
* Wordsmithing and cleanup
* Format unicode_common (#13)
* case alignment
* process_record_unicode_common → process_unicode_common
* Move song arrays into function where they're used, align preprocessor directives
* Swap the order of UC_WIN and UC_BSD
* Update Unicode docs
* Reorder Unicode mode stuff to match the order of input mode constants
* Fix capitalization in doc subtitle
* Readd BSD and OSX_RALT songs
* Reword BSD note in docs
* Readd BSD keycode description
* Reword explanation of input on different platforms
* Steal vomindoraan's input mode documentation
Co-Authored-By: vomindoraan (vomindoraan@gmail.com)
* Willingly give Drashna the rest of my Unicode doc improvements
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* Rearrange process_unicode_common functions
* Make Unicode input mode constants (UC_*) an enum
* Simplify unicode_input_start/finish code
* Make the key used for WinCompose configurable
* Remove UC_OSX_RALT in favor of setting the key with UNICODE_OSX_KEY
* Update Unicode input mode doc
* Add descriptions and rearrange definitions in process_unicode_common.h
* Add registry command to Unicode docs + misc updates
* Reword an explanation in Unicode docs
* Add TODO comment
* Add cycle_unicode_input_mode and UNICODE_SELECTED_MODES macro
* Add an option for making cycle changes persistent
* Add debug prints to functions that change input_mode
* Use cycle_unicode_input_mode in whitefox/konstantin
* Add persist_unicode_input_mode function
* Add offset to cycle to allow stepping in reverse
* Add keycodes: UNICODE_MODE_FORWARD, UNICODE_MODE_REVERSE
Aliases: UC_MOD, UC_RMOD (respectively)
* REVERT ME: Undo changes to whitefox/konstantin to avoid conflicts
* Fix wrong constant name
* Revert "REVERT ME: Undo changes to whitefox/konstantin to avoid conflicts"
This reverts commit 42676bf251fc8e3823f5e614dad6e510ba47a2f3.
* Change dprintf text
* Give selected modes priority over EEPROM when !UNICODE_CYCLE_PERSIST
* Remove trailing whitespace
* Cleanup of RALT code and unicode compilation stuff
* Remove else for unicode handling
* Espectro: layout macro refactor
- updated to #pragma once method
- restructure LAYOUT_all data as block comment
- Configurator was reading the LAYOUT_all macro even though it was commented out.
- updated all keyswitch arguments to use K<ROW><COLUMN> notation
- add LAYOUT_iso macro
- add info.json file for Configurator support
* Espectro: keymap refactor
- deleted unused MODS_CTRL_MASK definitions
- iso keymap refactored to use LAYOUT_iso macro
- default and iso keymaps refactored for readability
* A Planck style keymap with iris flair
- Re-arrange layers to be more planck like.
- move backspace to right thumb
- replace backspace with minus, more useful for coding
- replace center keys with brackets
- MT(MOD_LCTRL and ESCAPE)
- Use QMK-DFU for bootloader
- add a soft reset to keymap
* Feedback from reviewers
- remove redundant define (noroadsleft)
- remove unused layer switch case (drashna)
* Adding ortho60 to handwired
* update to use LAYOUT_ortho_5x12
* Address PR comments about layout macros
* Add default layout to info.json for configurator
* Hack to xyverz layout until RGB branch is merged
* Fix undef RGBDIPIN in xyverz 12x5 layout
* Revert change to xvyerz's layout
* Fix typo
* Fix order
* Revert xyverz rules.mk
* ErgoInu: Configurator update, part 1
Give each key its own line to make the file easier to debug.
* ErgoInu: Configurator update, part 2
- converted all JSON variables to lowercase (this was the bugfix)
- converted Tabs to Spaces
* ErgoInu: Configurator update, part 3
- break key data into chunks
* ErgoInu: Configurator update, part 4
Rebuilt the layout tree into a new file, taking the Y values from the original data. Copied relevant data from original file into the new file, and then overwrote the original file.
* Cospad: Configurator update
- added LAYOUT_gamepad_6x4 data
- renders as 4 rows by 6 columns visually
- fixed LAYOUT_numpad_6x4 data
- JSON objects were in the wrong order
* Cospad: readme update
- markdown formatting fixes
- made Hardware Availability address a hyperlink
- updated Docs links
* converter/ibm_5291: Configurator support
- added layout data to info.json file
- corrected keyboard_folder value
* converter/ibm_5291: readme cleanup
- Fixed "image" url (target of link was a web page; changed markdown formatting to text link)
- Sentence capitalization fixes
- markdown formatting fixes for readability
* Layout macro refactor
- Renamed KC_KEYMAP to LAYOUT_kc
- Renamed KEYMAP to LAYOUT
- moved LAYOUT above LAYOUT_kc (Hoping this encourages users to use LAYOUT.)
- updated layout macro name in info.json
- white space changes for readability
* Keymap refactor: default
Default keymap now uses `#include QMK_KEYBOARD_H` and LAYOUT macro (from KC_KEYMAP/LAYOUT_kc). Keymap was also refactored to use process_record_user function instead of deprecated action_get_macro from TMK.
Also moved LONGPRESS_DELAY and LAYER_TOGGLE_DELAY definitions to config.h.
* Keymap refactor: dcompact
- Changed chimera_ortho.h include for QMK_KEYBOARD_H
- Updated layout name on keymap layers
* Coding conventions fix in default keymap
* Keymap refactor: gordon
- Changed chimera_ortho.h include for QMK_KEYBOARD_H
- Removed redundant includes of action_layer.h and process_tap_dance.h (superseded by QMK_KEYBOARD_H)
- Removed redundant definitions for KC_NO and KC_TRNS
- Updated layout name on keymap layers
* add temporary compile test shell script
* Extended support of SKIP_VERSION to make invariant compile results during testing.
* build_keyboard.mk, tmk_core/rules.mk: add LIB_SRC, QUANTUM_LIB_SRC support
Support compiled object enclosed in library.
e.g.
```
LIB_SRC += xxxx.c
xxxx.c --> xxxx.o ---> xxxx.a
```
* remove 'ifdef/ifndef USE_I2C' from quantum/split_common/{i2c|serial}.c
* add SKIP_DEBUG_INFO into tmk_core/rules.mk
When SKIP_DEBUG_INFO=yes is specified, do not use the -g option at compile time.
* tmk_core/rules.mk: Library object need -fno-lto
* add SKIP_DEBUG_INFO=yes
* remove temporary compile test shell script
* add '#define SOFT_SERIAL_PIN D0' to keyboards/lets_split/rev?/config.h
* quantum/split_common/serial.c: Changed not to use USE_I2C.
* Refactor fourier to use split common code
* Refactor fourier to use split common code - fix handedness when not using EE_HANDS or MASTER_LEFT
* add SOFT_SERIAL_PIN config
* handwired/CMD60: refactor
- renamed layout macro KEYMAP to LAYOUT
- removed K2C, K3B and K3C locations (indications are these locations were unused in hardware)
- keymap
- now uses #include QMK_KEYBOARD_H
- converted keycodes to short format
- deleted TMK fn_actions and action_get_macro blocks
- white space changes (readability/alignment)
* handwired/CMD60: Configurator support
* handwired/CMD60: readme update
- updated to conform to current QMK template
- added image and build gallery links
* handwired/cmd60: rename all files and folders to lowercase
* handwired/maartenwut: readme cleanup
- Fixed typo (Maarten's last name was misspelled)
- Updated Docs links
* handwired/maartenwut: Configurator support
* S7 Elephant: Configurator bugfix, part 1
Reformatted the JSON so each key is on its own line:
This makes the keys easier to rearrange.
* S7 Elephant: Configurator bugfix, part 2
Deleted the extra key from LAYOUT_iso_1u:
JSON contents stated this layout used a split Backspace, but the matrix is configured and intended to have a 2u Backspace.
Extended the Backspace to 2u width and deleted the extra key. (This fixes the error that broke LAYOUT_iso_1u's rendering in the Configurator.)
* S7 Elephant: Configurator bugfix, part 3
Fix ISO layouts:
Noticed JSON object for Enter on ISO layouts was immediately after Right Bracket. Inspection of s7_elephant.h revealed the expected and appropriate location to be after ISO Hash.
Moved Enter key to the proper location on all ISO layouts.
* Add standard ALGR defition, remove (re)definitions from language files
* Use ALGR(kc) consistently in ALTGR(kc) aliases
* Non-Nordic keymaps should not use NO_ALGR
* Add standard KC_ALGR definition
* Update docs with ALGR and KC_ALGR
* Update SS_ALGR and ALGR_T aliases
* handwired/numpad20: refactor
- layout macro no longer auto-prepends keycodes with KC_
- keymaps for this keyboard will now compile in QMK Configurator
- keymap now uses #include QMK_KEYBOARD_H
- deleted unused fn_actions code block
* handwired/numpad20: Configurator support
* Preonic: refactor layout macros
Unify layout macro names across AVR and ARM.
- all layouts and matrices have moved/duplicated to their appropriate revisions
- preonic.h now includes the appropriate header file from the selected revision
- revision header files only contain layouts appropriate for that revision
- Previously, all layouts were available in source for all revisions.
- removed KEYMAP layout macro alias (was unused)
- macros LAYOUT_preonic_1x2uC and LAYOUT_preonic_grid for AVR and ARM revisions
- LAYOUT_preonic_grid has alias LAYOUT_ortho_5x12 for all revisions
- deleted LAYOUT_ortho_4x12 alias (not appropriate for this keyboard)
- ARM-based revisions have 1x2uR, 1x2uL and 2x2u matrices
* Preonic: updated revision headers to #pragma once
* Preonic: update Configurator files
Updated the Configurator files to reflect the previous changes in this branch.
- Preonic revs. 1 and 2 will use keyboards/preonic/info.json
- Preonic rev. 3 will use keyboards/preonic/rev3/info.json
- This file will override keyboards/preonic/info.json when preonic/rev3 is selected in the Configurator.
Drashna Jaelre
fauxpark
Danilo Vulicevic
noroadsleft
MechMerlin
Frederick Hirsch
Daniel H Klein
buhearns
Andrew Kannan
Wilba
zvecr
Danny
kwerdenker
Dusty Pomerleau
Mike Bell
mikethetiger
GreenShadowMaker
TerryMathews
takashiski
Braydon Bubnick
Edmund Miller
Pierre Constantineau
Brice Figureau
Chuck Lauer Vose
adiron
Konstantin Đorđević
Jeremy Bernhardt
Rys Sommefeldt
Cole Markham
sprayed
Carlos
Biacco42
Nicholas Shaff
Josh Forisha
Emīls Delle
Peter Roe
Fang
Mazin Power
moyi4681
Felipe Coury
Fredric Silberberg
Boy_314
Tuan Anh Tran
Rockman18
Othi
wanleg
Mattia Dal Ben
Max
Spaceman
QMK Bot
Geoff Lane
Brice Figureau
ai03
f00_B34rd
VM
Maxr1998
CodingDog
Alex Ong
yulei
James Churchill
seebs
Jack Humbert
walkerstop
Olivier Poitrey
zunger-humu
skullY
shovelpaw
skullydazed
Nikolaus Wittenstein
Jason Thigpen
Daniel Schäfer
Maarten Dekkers
Stefan Peterson
Takeshi ISHII
Kenny Hung
WillyPillow
noroadsleft
Jordi Pakey-Rodriguez
Valen Cheung
bendk
Branden Byers
Tomek Wójcik
Aaron Wood
Erovia
Jeremy Bernhardt
Christoffer Holmberg
tw1t611
Jason Pepas
SpacebarRacecar
gorbachev
reasonsandreasons
ave-63
Eduardo Lourenço Pinto Neto
Danny Nguyen
Vasken Dermardiros
Elvis Pfützenreuter
patrickmt
flehrad
yiancar
Masayuki Sunahara
Naoki Katahira
Jordi Pakey-Rodriguez
Gam3cat
ishtob
Frank Tackitt
lbibass
David Dai
satt99
Matthew Lyon
ginjake
Menchen
Stephen Gelman
Jumail Mundekkat
Adam Lee
Michael Pio
Jeremy Herve
Sascha Grunert
Emily Soldal
MakotoKurauchi
Kevin Hogeland
Skyler Lewis
Ismael Venegas Castelló
Yan-Fa Li
Daniel Shields
Fredric Silberberg