* Issue 9942: Add Quantum defines
Add codes to quantum_keycodes for LSA, RSA, RCS, and their corresponding _T macros
* 9942: Add documentation for new defines
Add documentation for new defines in feature request 9942. Also define SAGR and SAGR_T as aliases for RSA and RSA_T.
* Update quantum/quantum_keycodes.h
* Update docs/keycodes.md
* Update docs/keycodes.md
* Update docs/keycodes.md
* Update docs/keycodes.md
* Add PR checklist document.
* Update docs/pr_checklist.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Reword the lower/raise/adjust suggestion somewhat for clarity.
* Add suggestion from @Didel for coding conventions.
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Indicator flag for RGB Matrix
This adds a new flag for the RGB Matrix feature that lets you specify if the LED is an indicator LED, to be used to indicate the system state of the keyboard (eg caps/num/etc lock status, layer indication, modifer status, etc).
* Better formatting of table
* small text and formatting fixes in vscode manual
fix double opening <kbd> tags for correct formatting
expand two points for better understanding
* restored <kbd>, clarified how to open the terminal
restored <kbd> tags that were deleted with the last commit; they are correct as they were to have the whole menu "breadcrumb" nested inside a box
clarified how to open the terminal
escaped backtick for shortcut Ctrl+` as I’ve added backticks for code on the same line
* Update docs/other_vscode.md
* Update Japanese translation of feature_mouse_keys.md.
* fix original document version.
* Update docs/ja/feature_mouse_keys.md
* update based on comment
* Add IS_LAYER_ON_STATE()/IS_LAYER_OFF_STATE() macros
* Add docs for IS_LAYER_ON/OFF(_STATE) macros
* Remove IS_LAYER_ON/OFF_STATE redefinition in userspace
* Run clang-format on quantum/quantum.h
* Redefine IS_LAYER_ON/OFF(_STATE) as aliases of existing layer functions
Also update relevant doc entries.
Needs testing to check if this breaks existing IS_LAYER_ON/OFF usage in certain
edge cases (namely calling the macros with 0).
* Reformat layer check function docs
* Add a function to set individual pixels
* Add documentation for oled_write_pixel
* use smaller data type for oled_write_pixel
* Fix boundary check edge case
* Update oled_write_pixel doc
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* dipsw test on helix/rev2/sc/back:five_rows
* add peek_matrix() to matrix_common.c
* add DIP_SWITCH_MATRIX_GRID support to quantum/dip_switch.c
* update docs/feature_dip_switch.md about DIP_SWITCH_MATRIX_GRID
* Test end. remove test code. Revert "dipsw test on helix/rev2/sc/back:five_rows"
This reverts commit 6d4304c74557597c9fb4d324f79c3ae4793ae874.
Process mouse movement in the keymap before it is sent to the host. Example uses
include filtering noise, adding acceleration, and automatically activating a
layer. To use, define the following function in your keymap:
void ps2_mouse_moved_user(report_mouse_t *mouse_report);
* Add Hebrew keymap aliases
* Use NBSP for internal space in box drawings
* Apply suggestions from code review
* More whitespace fixes
* IL_DVAV, IL_DYOD and IL_VYOD were incorrect
* Add IL_DEG, IL_MUL, IL_DIV
* Hebrew is now ISO (no more BAE)
* Use ISO left shift
* Apply suggestions from code review
* DYOD and VYOD were reversed in diagram.
Oops!
* The TAGs of the original document has been updated to facilitate future verification.
* docs/ja/driver_installation_zadig.md
* docs/ja/feature_audio.md
* docs/ja/feature_auto_shift.md
* docs/ja/feature_bluetooth.md
* docs/ja/hardware_avr.md
* docs/ja/hardware_drivers.md
* docs/ja/getting_started_make_guide.md
* The TAG of the original document has been updated to facilitate future verification.
* The TAG of the original document has been updated to facilitate future verification.
* update docs/ja/feature_tap_dance.md
* The TAG of the original document has been updated to facilitate future verification.
* The TAG of the original document has been updated to facilitate future verification.
* The TAG of the original document has been updated to facilitate future verification.
* Fix incorrect delay when setting WS2812 (and similar) leds
* Add documentation for WS2812_DELAY_MICROSECONDS
* Remove improper cast to uint8_t
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
* Remove unneeded cast to uint8_t and correct math
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
* microseconds -> µs
Co-authored-by: Ryan <fauxpark@gmail.com>
* Make documentation better match the spec sheet.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Rename macro to match spec sheet
* Further correction to the delay maths for the SPI case.
Co-authored-by: Joel Challis <git@zvecr.com>
* Move ws2812_common.h to the drivers directory
* Revert "Further correction to the delay maths for the SPI case."
This reverts commit e61b56a2cfc7dfec9992a7a3af92afa50e5b8ec0.
* Remove ws2812_setleds_pin(); consolidate ws2812.h
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
PR #9307 fixed the immediately visible problem (the command that was
added to $HOME/.bashrc was incorrect because of missing quotes around
paths with spaces). However, the modified command is still wrong - it
captures the value of $PATH at the setup time, and the resulting command
written out to $HOME/.bashrc will overwrite $PATH with that captured
value, ignoring any changes in the environment. This may be especially
important for WSL, where the initial value of $PATH in Linux includes
everything which has been added to %PATH% on the Windows side; after
adding that command to $HOME/.bashrc the WSL environment will no longer
pick up any changes made by newly installed Windows software.
Instead of that, use single quotes around the command, so that the
environment variables are not expanded at the setup time, and the
command that is added to $HOME/.bashrc becomes exactly this:
PATH="$HOME/.local/bin:$PATH"
This command will use the $HOME and $PATH environment variable values at
the time the command is executed, not at the time the QMK setup is
performed, so any further updates to $PATH are taken into account.
Double quotes also ensure that the command is safe even if the values of
those environment variables contain spaces.
* Change `echo` to `export`
* Add `export` as a note under the `echo` command
* Remove note from last commit
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update docs/newbs_getting_started.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update docs/newbs_getting_started.md
Add 1 line of whitespace under note
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initial doco write-up.
* Update docs/platformdev_selecting_arm_mcu.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Updated the Japanese translation of newbs_learn_more_resources.md
Updated the Japanese translation of newbs_learn_more_resources.md to 0.9.0.
* update docs/ja/newbs_learn_more_resources.md
* update ja/newbs_learn_more_resources.md
* add feature_mouse_keys.md translation
* update based on comment
* update based on comment
* update based on comment
* update based on comment
* update based on comment
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* Fixed the indentation of the sample code in docs/feature_pointing_device.md sample.
* Update docs/feature_pointing_device.md
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* ARM split - Add uart half duplex transport support
* Fix for f103
* initial full duplex pass
* partially remove full duplex
* Correct speeds within driver docs
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* newbs_flashing.md: place bootloader instructions before Toolbox intro
* Update docs/newbs_flashing.md
* More wordsmithing, point ARM users at Discord if all else fails
* Link Discord
* CLI: Improve experience when running `qmk setup` on FreeBSD.
* Install the `avrdude` package as well.
* Switch to installing python packages w/ `--user` flag.
* Basic getting started sections for FreeBSD.
* Update `util/freebsd_install.sh` for root/non-root branches.
* Add ID to doc section.
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Add ID to another docs section.
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Use `; then` in script for consistency.
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Updated to use sudo in one shot if available.
* Apply suggestions from code review
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* Style fixes for latest version in master.
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: skullydazed <skullydazed@users.noreply.github.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* add feature_leader_key.md translation
* update based on comment
* set link as lang dir
* update based on comment
* update based on comment
* update based on comment
* Improve stock bootloader list
* Switch version numbers on USB64/128 bootloaders
* Unix line endings for PS2AVRGB bootloader
* Update PS2AVRGB bootloader to 1.0.1
* Also mention bootloader rule
* Didn't need to change the links
This commits add the SH_OS keycode, which works similarly to one shot
layers:
* while pressed, the keyboard is swapped
* if no keys were pressed while it was pressed, the next key press is
swapped
SH_OS also supports chaining with one shot layers:
OSL(x) + SH_OS + key interprets the key press on the oneshot layer.
The ONESHOT_TIMEOUT setting used by one shot keys and layers is also
used by oneshot swap hands. In the above chaining scenario the timeout
of the oneshot layer is reset when swap hands is activated.
Resolves#2682
* Allow 16 lighting layers
* Require #define RGBLIGHT_LAYERS_16 to enable 16 layers
* Override RGBLIGHT_MAX_LAYERS to set maximum number of lighting layers
* Enforce lower bound on RGBLIGHT_MAX_LAYERS
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* Fix an error in the check for valid RGBLIGHT_MAX_LAYERS
* Don't use bitfield / PACKED, as it causes bloat
* Update documentation re: up to 32 lighting layers
* Run cformat
* Add note about increasing FW size in docs/config_options.md
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Remove no-longer-valid comment
* Add doc note that split sync will be slower
Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Implement momentarily blink of lighting layers
* Refactor spidey3 userspace to use rgb layer blink
* Remove un-necessary line from example in documentation
* Revert "Refactor spidey3 userspace to use rgb layer blink"
This reverts commit 831649bb680c41c6d663ae6fa86d13f4f8bebdd8.
* Adds a missing bit of documentation about lighting layer blink
* Update docs/feature_rgblight.md per suggestions
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_rgblight.md per suggestions
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_rgblight.md per suggestions
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* cformat, as suggested
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Added raw hid feature documentation page
* Update docs/feature_rawhid.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/feature_rawhid.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/feature_rawhid.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/features.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* added feature_rawhid.md to _summary.md in docs
* fixed _summary.md order
* Update docs/feature_rawhid.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update feature_rawhid.md
Removed the useless bit about finding usage page and usage.
* Update feature_rawhid.md
* Update docs/feature_rawhid.md
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* Update docs/feature_rawhid.md
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* Update docs/feature_rawhid.md
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* Update docs/feature_rawhid.md
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* Remove teensy client, small origanization fixes
* Fixed merge conflicts
Removed features.md
Updated _summary.md with new format and added RAW HID entry under Software Features
* Added rawhid feature page
Messy is what you get when you don't do things right the first time
Co-authored-by: fauxpark <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* add 'togglePin' conveniance function
for AVR and chibios
* drop outmost parantheses
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* toggle pin on avrs
toggle a pin configured as output by writing the corresponding bit to the PIN register
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* togglepin: add documentation for newly added function
* Update docs/internals_gpio_control.md
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* on AVR: use PORTD to toggle the output
... since not all MCUs support toggling through writing to PIN
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Johannes <you@example.com>
Co-authored-by: Konstantin Đorđević <vomindoraan@gmail.com>
Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update and try to clarify the CLI installation on Linux
* Update commands, add note for Debian/Ubuntu
* Update docs/newbs_getting_started.md
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Jason Fields
nopunin10did
Takeshi ISHII
shela
Nick Brassel
Drashna Jaelre
Marco Syfrig
umi
Rustam Zagirov
nathanvercaemert
Ryan
Konstantin Đorđević
Gautham Yerroju
Guillaume Gérard
Matthew Tse
Dongfeng Yu
Erovia
yanekm
Manna Harbour
Joshua Diamond
AlexOConnorHub
Xelus22
Jason Laqua
Reed
jems-lee
Sergey Vlasov
neon4272
precondition
itsnoteasy
Pete Johanson
Kimat Boven
James Young
Zach White
Joel Challis
skullY
Nick Blyumberg
Zsolt Parragi
floookay
Ahmed Elshafey
JohSchneider
Alexander Hart