Remove `DESCRIPTION` (#9732)

master
Ryan 2020-07-16 15:49:18 +10:00 committed by GitHub
parent 92d0a71af7
commit 72d3270547
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
13 changed files with 3 additions and 263 deletions

View File

@ -43,8 +43,6 @@ This is a C header file that is one of the first things included, and will persi
* generally who/whatever brand produced the board
* `#define PRODUCT Board`
* the name of the keyboard
* `#define DESCRIPTION a keyboard`
* a short description of what the keyboard is
* `#define MATRIX_ROWS 5`
* the number of rows in your keyboard's matrix
* `#define MATRIX_COLS 15`

View File

@ -67,7 +67,7 @@ El archivo `config.h` es donde configuras el hardware y el conjunto de caracter
En la parte superior de `config.h` encontrarás ajustes relacionados con USB. Estos controlan la apariencia de tu teclado en el Sistema Operativo. Si no tienes una buena razón para cambiar debes dejar el `VENDOR_ID` como `0xFEED`. Para el `PRODUCT_ID` debes seleccionar un número que todavía no esté en uso.
Cambia las líneas de `MANUFACTURER`, `PRODUCT`, y `DESCRIPTION` para reflejar con precisión tu teclado.
Cambia las líneas de `MANUFACTURER` y `PRODUCT` para reflejar con precisión tu teclado.
```c
#define VENDOR_ID 0xFEED
@ -75,7 +75,6 @@ Cambia las líneas de `MANUFACTURER`, `PRODUCT`, y `DESCRIPTION` para reflejar c
#define DEVICE_VER 0x0001
#define MANUFACTURER Tú
#define PRODUCT mi_teclado_fantastico
#define DESCRIPTION Un teclado personalizado
```
?> Windows y macOS mostrarán el `MANUFACTURER` y `PRODUCT` en la lista de dispositivos USB. `lsusb` en Linux toma estos de la lista mantenida por el [Repositorio de ID USB](http://www.linux-usb.org/usb-ids.html) por defecto. `lsusb -v` mostrará los valores reportados por el dispositivo, y también están presentes en los registros del núcleo después de conectarlo.

View File

@ -67,7 +67,7 @@ The `config.h` file is where you configure the hardware and feature set for your
At the top of the `config.h` you'll find USB related settings. These control how your keyboard appears to the Operating System. If you don't have a good reason to change you should leave the `VENDOR_ID` as `0xFEED`. For the `PRODUCT_ID` you should pick a number that is not yet in use.
Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately reflect your keyboard.
Do change the `MANUFACTURER` and `PRODUCT` lines to accurately reflect your keyboard.
```c
#define VENDOR_ID 0xFEED
@ -75,7 +75,6 @@ Do change the `MANUFACTURER`, `PRODUCT`, and `DESCRIPTION` lines to accurately r
#define DEVICE_VER 0x0001
#define MANUFACTURER You
#define PRODUCT my_awesome_keyboard
#define DESCRIPTION A custom keyboard
```
?> Windows and macOS will display the `MANUFACTURER` and `PRODUCT` in the list of USB devices. `lsusb` on Linux instead takes these from the list maintained by the [USB ID Repository](http://www.linux-usb.org/usb-ids.html) by default. `lsusb -v` will show the values reported by the device, and they are also present in kernel logs after plugging it in.

View File

@ -48,8 +48,6 @@ QMK での全ての利用可能な設定にはデフォルトがあります。
* 一般的に、誰もしくはどのブランドがボードを作成したか
* `#define PRODUCT Board`
* キーボードの名前
* `#define DESCRIPTION a keyboard`
* キーボードの簡単な説明
* `#define MATRIX_ROWS 5`
* キーボードのマトリックスの行の数
* `#define MATRIX_COLS 15`

View File

@ -73,7 +73,7 @@ or open the directory in your favourite text editor.
`config.h` の先頭には USB に関する設定があります。これらはキーボードが OS からどのように見えるかを制御しています。変更する理由がない場合は、`VENDOR_ID` を `0xFEED` のままにしておく必要があります。`PRODUCT_ID` にはまだ使用されていない番号を選ばなければいけません。
`MANUFACTURER``PRODUCT``DESCRIPTION` をキーボードにあった設定に変更します。
`MANUFACTURER``PRODUCT` をキーボードにあった設定に変更します。
```c
#define VENDOR_ID 0xFEED
@ -81,7 +81,6 @@ or open the directory in your favourite text editor.
#define DEVICE_VER 0x0001
#define MANUFACTURER You
#define PRODUCT my_awesome_keyboard
#define DESCRIPTION A custom keyboard
```
?> Windows や macOS では、`MANUFACTURER` と `PRODUCT` が USBデバイスのリストに表示されます。Linux 上の `lsusb` では、代わりにデフォルトで [USB ID Repository](http://www.linux-usb.org/usb-ids.html) によって維持されているリストからこれらを取得します。`lsusb -v` を使用するとデバイスから示された値を表示します。また、接続したときのカーネルログにも表示されます。

View File

@ -77,7 +77,6 @@ def _extract_config_h(info_data):
'device_ver': config_c.get('DEVICE_VER'),
'manufacturer': config_c.get('MANUFACTURER'),
'product': config_c.get('PRODUCT'),
'description': config_c.get('DESCRIPTION'),
}
return info_data

View File

@ -25,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DEVICE_VER 0x0001
#define MANUFACTURER %YOUR_NAME%
#define PRODUCT %KEYBOARD%
#define DESCRIPTION A custom keyboard
/* key matrix size */
#define MATRIX_ROWS 2

View File

@ -25,7 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DEVICE_VER 0x0001
#define MANUFACTURER %YOUR_NAME%
#define PRODUCT %KEYBOARD%
#define DESCRIPTION A custom keyboard
/* key matrix size */
#define MATRIX_ROWS 8

View File

@ -141,7 +141,6 @@ static void command_common_help(void) {
static void print_version(void) {
// print version & information
print("\n\t- Version -\n");
print("DESC: " STR(DESCRIPTION) "\n");
print("VID: " STR(VENDOR_ID) "(" STR(MANUFACTURER) ") "
"PID: " STR(PRODUCT_ID) "(" STR(PRODUCT) ") "
"VER: " STR(DEVICE_VER) "\n");

View File

@ -1,126 +0,0 @@
#----------------------------------------------------------------------------
# On command line:
#
# make all = Make software.
#
# make clean = Clean out built project files.
#
# make coff = Convert ELF to AVR COFF.
#
# make extcoff = Convert ELF to AVR Extended COFF.
#
# make program = Download the hex file to the device.
# Please customize your programmer settings(PROGRAM_CMD)
#
# make teensy = Download the hex file to the device, using teensy_loader_cli.
# (must have teensy_loader_cli installed).
#
# make dfu = Download the hex file to the device, using dfu-programmer (must
# have dfu-programmer installed).
#
# make flip = Download the hex file to the device, using Atmel FLIP (must
# have Atmel FLIP installed).
#
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
# (must have dfu-programmer installed).
#
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
# (must have Atmel FLIP installed).
#
# make debug = Start either simulavr or avarice as specified for debugging,
# with avr-gdb or avr-insight as the front end for debugging.
#
# make filename.s = Just compile filename.c into the assembler code only.
#
# make filename.i = Create a preprocessed source file for use in submitting
# bug reports to the GCC project.
#
# To rebuild project do "make clean" then "make all".
#----------------------------------------------------------------------------
# Target file name (without extension).
TARGET = usb_hid_test
TMK_DIR = ../../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# comment out to disable the options.
#
# Console for debug
OPT_DEFS += -DCONSOLE_ENABLE
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
#OPT_DEFS += -DBOOT_SIZE=4096
SRC = test.cpp
SRC += common/debug.c
SRC += common/print.c
CONFIG_H = config.h
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TMK_DIR)
VPATH += $(TMK_DIR)/common
# program Leonardo
PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -P$(DEV) -b57600 -Uflash:w:$(TARGET).hex
include $(TMK_DIR)/protocol/usb_hid.mk
include $(TMK_DIR)/protocol/lufa.mk
include $(TMK_DIR)/rules.mk

View File

@ -1,30 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xCAFE
#define DEVICE_VER 0x0814
#define MANUFACTURER t.m.k.
#define PRODUCT USB to USB keyboard converter
#define DESCRIPTION Product from t.m.k. keyboard firmware project
/* matrix size */
#define MATRIX_ROWS 32
#define MATRIX_COLS 8

View File

@ -1,92 +0,0 @@
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <util/delay.h>
#include <Arduino.h>
// USB HID host
#include "Usb.h"
#include "hid.h"
#include "hidboot.h"
#include "parser.h"
// LUFA
#include "lufa.h"
#include "debug.h"
#include "leonardo_led.h"
static USB usb_host;
static HIDBoot<HID_PROTOCOL_KEYBOARD> kbd(&usb_host);
static KBDReportParser kbd_parser;
static void LUFA_setup(void)
{
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
// Leonardo needs. Without this USB device is not recognized.
USB_Disable();
USB_Init();
// for Console_Task
USB_Device_EnableSOFEvents();
}
static void HID_setup()
{
// Arduino Timer startup: wiring.c
init();
if (usb_host.Init() == -1) {
debug("HID init: failed\n");
LED_TX_OFF;
}
_delay_ms(200);
kbd.SetReportParser(0, (HIDReportParser*)&kbd_parser);
}
int main(void)
{
// LED for debug
LED_TX_INIT;
LED_TX_ON;
print_enable = true;
debug_enable = true;
debug_matrix = true;
debug_keyboard = true;
debug_mouse = true;
LUFA_setup();
sei();
// wait for startup of sendchar routine
while (USB_DeviceState != DEVICE_STATE_Configured) ;
if (debug_enable) {
_delay_ms(1000);
}
HID_setup();
debug("init: done\n");
for (;;) {
usb_host.Task();
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
// LUFA Task for control request
USB_USBTask();
#endif
}
return 0;
}

View File

@ -67,7 +67,6 @@ Start Your Own Project
#define PRODUCT_ID 0xBEEF
#define MANUFACTURER t.m.k.
#define PRODUCT Macway mod
#define DESCRIPTION t.m.k. keyboard firmware for Macway mod
#### 2. Keyboard matrix configuration
#define MATRIX_ROWS 8