MCU Pins for debugging, LED, boot tracing, and shift registers are now configurable at keyboard level.
Macros led_* replaced by DBG_LED_*
Macros m15_* replaced by DBG_1_*
Macros m27_* replaced by DBG_2_*
Macros m28_* replaced by DBG_3_*
For CTRL and ALT keyboards, debug boot tracing pin default now set to pad M27 instead of M28 since although M28 is not being used, it is technically a signal for USB port detection.
m15_print(...) renamed to dbg_print(...) to get away from hard coded port names.
dbg_print function now follows similar pattern to debug led output.
* Added RGB toggle and cycle to default mapping. This is present on layouts on 'http://qmkeyboard.cn/' but not here.
* Added addition keycodes for hue/sat/val.
* handwired/minorca: refactor
- Refactored keymaps to use a layout macro, which was added to minorca.h.
- keymaps now use QMK_KEYBOARD_H include
- removed redundant KC_TRNS and KC_NO definitions
- rgb keymap refactor to use QMK core layer switching and Mod-Tap keycodes
* handwired/minorca: Configurator support
* handwired/minorca: readme cleanup
Restructure readme file to current QMK template.
* Update alps64 aek layout to work
I tried using the layout provided with my alp64 board in AEK
configuration, but keys weren't mapping correctly until I made this fix.
* Update crd's alps64 aek keymp to match other boards
(inspired by mechmerlin)
* Fix minor whitespace issue
* Initial palm_usb support
* removing left over sun .c file
* fixing licenses
* actually adding updated files
* fixing build error
* more include cleanup
* handwired/gamenum: refactor
- layout macro KEYMAP renamed to LAYOUT
- white space changes for alignment
- default keymap
- now uses #include QMK_KEYBOARD_H
- updated layout macro names
- white space changes (for readability)
* handwired/gamenum: Configurator support
* handwired/gamenum: readme cleanup
- renamed file to lowercase
- updated to match current QMK template more closely
- edits to reflect the other changes in this PR
Adds Configurator support for the Sol rev. 1 by RGBKB.
Notes:
The Sol keyboard supports split thumb keys like the Ergodox - any of the 2u thumb keys can be split into two 1u keys. The matrix here is configured for fully 1u keys on the thumbs.
The Sol also supports installing a rotary encoder on each half. The key matrix given includes the encoders' functions, which are shown in the Configurator as two 1u keys side by side below each half's main key block. The left key of the two (for each side) represents that half's rotary encoder's counter-clockwise function, and the right key is that encoder's clockwise function.
* handwired/fivethirteen: refactor
- Layout macro KEYMAP renamed to LAYOUT
- Default keymap
- now uses #include QMK_KEYBOARD_H
- Removed redundant KC_TRNS definition
- Removed deprecated fn_actions and action_get_macro functions.
* handwired/fivethirteen: Configurator support
* handwired/fivethirteen: readme cleanup
Restructured readme file to be closer to current QMK template.
Couldn't find a photo of an assembled fivethirteen, so deleted the
reference to the photograph.
Renamed to readme.md
* handwired/dactyl_manuform/4x5: Configurator support
* handwired/dactyl_manuform/4x6: Configurator support
* handwired/dactyl_manuform/5x6: Configurator support
* handwired/dactyl_manuform/5x7: Configurator support
* handwired/dactyl_manuform/6x6: Configurator support
* Update to work with Planck Rev. 6
Still something that needs to be worked with under keymap.c
Qwerty layer tap-toggle function seems to be a little laggy? Not instantaneous
* Changes
Deleted some unneeded lines
* deleting unneeded lines
* my XD75 builds for idobo and XD75
these are my xd75 layouts for the 2 versions of the board
* clearing of free space
spring cleaning
* additional cleaning
more spring cleaning
* removed lighting commands
don't need lighting on the idobo board so removal of such commands to keep the sizing down
* update for readme.md
* Update config.h
* commiting with keymap erros on idobo for review
* syntax fix for idobo and xd75 revok75, addition of del key switch on fn layer
* config edit to config user and keymap QMK_KEYBOARD_H
* update to vol controls for both idobo and xd75 for revok75 keymap
* filename changes
* Refactor lets split to use split common code
* Refactor lets split to use split common code
* Build fixes for OLED_sample keymap
* Build fixes for OLED_sample keymap - attempt to reduce firmware size
* preonic-kuatsure: ctrl / esc in one key + hello ` again
* preonic-kuatsure: remove esc on lower
* preonic-kuatsure: programmy macros
* user-kuatsure: turn off console all the time
* preonic-kuatsure: auto shift, but only for numbers
* preonic-kuatsure: remove programmery macros
* preonic-kuatsure: move braces, parens, etc over to raise
backwards compat
move &*() on lower
* preonic-kuatsure: stop with the full rep of game layer
* Add tsangan bottom row hhkb layout for dz60
* Add crd's tsangan hhkb layout for dz60
* Resort to native key aliases when they exist
* Update crd's dz60 ansi keymap to match updates for hhkb fn layer
* Add tsangan hhkb layout to dz60 info.json for KLE
* Fix JSON nesting in dz60 layouts block
* Minor adjustments to crd layouts to make them more consistent
* Update layout naming to 60_tsangan_hhkb
* Hacker Dvorak
Programmer Dvorak based layout for the Ergodox EZ.
* Address drashna comments.
* Fix RGB and drop OSL for MO.
* Add gulp file to automate development.
* Fix gulpfile.
* Caps, num and scroll lock indicators.
* Fix scroll lock.
* Add final RGBKB Sol firmware
* Apply suggestions from code review
Apply most of the changes noroadsleft has suggested
Co-Authored-By: Legonut <legonut3@gmail.com>
* Cleanup readme
* Cleanup keymaps per @noroadslefts suggestions
* Remove eeproms, use set_single_persistent_default_layer
* Suggestions from @noroadsleft and @drashna
some small cleanup
* Change RGB_SMOD to RGB_RMOD
* fix RGB_SMOD
* Apply suggestions from code review
Remove redundant lines
Co-Authored-By: Legonut <legonut3@gmail.com>
* add initial support for hadron ver3
* add initial support for hadron ver3
* pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display
* initial work on OLED using qwiic driver
* early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality
* moved oled defines to config.h and added ifndef to micro_oled driver
* WORKING :D - note, still work in progress to get the start location correct on the 128x32 display.
* added equation to automatically calculate display offset based on screen width
* adding time-out timer to oled display
* changed read lock staus via read_led_state
* lock indications fixes
* Added scroll lock indication to oled
* add support for DRV2605 haptic driver
* Improve readabiity of DRV2605 driver.
-added typedef for waveform library
-added unions for registers
* Update keyboards/hadron/ver2/keymaps/default/config.h
Co-Authored-By: ishtob <ishtob@gmail.com>
* Update keyboards/hadron/ver2/keymaps/default/config.h
Co-Authored-By: ishtob <ishtob@gmail.com>
* Update keyboards/hadron/ver2/keymaps/default/config.h
Co-Authored-By: ishtob <ishtob@gmail.com>
* Update keyboards/hadron/ver2/keymaps/default/config.h
Co-Authored-By: ishtob <ishtob@gmail.com>
* Fixes for PR
* PR fixes
* fix old persistent layer function to use new set_single_persistent_default_layer
* fix issues with changing makefile defines that broken per-key haptic pulse
* Comment fixes
* Add definable parameter and auto-calibration based on motor choice
* keymap + alpha
* some fixes
* keymap + alpha
* some fixes
* drashna changes
* linked main Alpha repo in keyboards/alpha readme
* missed a spot
* there's another function called FUNC lol
* keymap + alpha
* some fixes
* keymap + alpha
* drashna changes
* Fixed include
* Revert "Fixed include"
This reverts commit ea92f261f86d8433eab313cde498adca1682a006.
* messed up my git, fixed include
* handwired/atreus50: refactor
- layout macro renames:
- KEYMAP is now LAYOUT
- COMPACT_KEYMAP is now LAYOUT_kc
- keymap updates:
- both keymaps now use #include QMK_KEYBOARD_H
- removed redundant KC_TRNS and KC_NO definitions
- default keymap now uses LAYOUT macro instead of LAYOUT_kc
* handwired/atreus50: readme cleanup
Reformatted the readme to be more closely aligned to current QMK
template, and fixed some typos/grammar.
* handwired/atreus50: Configurator support
* add 60_hhkb support
* add qmk configurator support for the new 60_hhkb layout
* allow community layout support for the 60_hhkb
* fixup readme to adhere to new QMK standards
* handwired/promethium: refactor
- config.h files
- updated to use #pragma once
- removed redundant config.h includes
- layout macro moved from config.h to promethium.h
- layout macro renamed from KEYMAP_CUSTOM to LAYOUT
* handwired/promethium: Configurator support
* Add support for S7 Elephant
A high-end 70% custom keyboard designed and produced by jacky from Geekhack.
* Polish S7 Elephant code
Implement drashna's suggestions:
- specify bootloader
- remove unnecessary defines
- use led_set_user() for LED logic
* Correct info.json and s7_elephant.h
Correct info.json and s7_elepant.h to follow QMK convention and fix a
missing curly bracket.
* Refactored M6-B to use Zeal60 RGB backlight code
* Fixed M6-B LED co-ordinates
* Minor changes to RGB config for Zeal65
* Added dynamic keymaps to WT80-A, WT60-A, WT-80A, U80-A
* Macro implementation
* Implemented macros, API protocol version 8, RGB backlight fixes
* Improved radial effects for M6-B
* Fixed undefined references when building an RGB keyboard after M6-A
* handwired/arrow_pad: layout macro and keymap refactor
- Layout macros moved from the keymaps to arrow_pad.h.
- LAYOUT_pad21 refactored to only accept keys that are physical present (no KC_NO entries required in keymap)
- Keymaps now use #include QMK_KEYBOARD_H
- Keymaps refactored to use process_record_user function (from action_get_macro)
* handwired/arrow_pad: Readme cleanup
Fixed the make commands and updated the layout macro.
* handwired/arrow_pad: Configurator support
* Fix reversed bool check in layer_state_set
* Add Quefrency 65 for a friend
* Add Ergodox EZ Glow keymap
* Add RGB Matrix Code
* Further changes to rgb matrix ErgoDox EZ
* Update bjohnson keymaps
* Fix CRKBD display
* Overhaul to corne keyboard
* Narrow scope for keylogger
* Minor layout tweaks to Corne Keyboard
* additional CRKBD tweaks
* Minor tweaks to CRKBD
* Add all characters for keylogger
* Ergodox EZ Glow overhaul
* Fix Ergodox EZ Glow layer colors
* Increase Tapping Term for Corne Keyboard
* Fix unicode-ish
* Revert some changes
* Add layer specific lighting effects
* Some minor tweaks to ergodox glow config
* revert changes to ergodox files
* Update Glow readme
* Add more tapping term defines
* Fix changes
* Fix ergodox keymap
* Hopefully fix sleeping
* Disable layer indications if rgb matrix is disabled
* Add support for sleeping and rgb layer change toggle to ergodox ez glow
* Make RGB Layer Indication Great Again
* Make Unicode Great Again
* Remove placeholder define
Co-Authored-By: drashna <drashna@live.com>
* Remove placeholder define
Co-Authored-By: drashna <drashna@live.com>
* Remove old EEPROM Reset keycode
* Enable ortho_4x12 community layouts for lets_split_eh
* Keymap build fixes now that ortho_4x12 is enabled
* Keymap build fixes now that ortho_4x12 is enabled
* compiles but is not working
* still testing 5291
* compiles but is not working
* still testing 5291
* fixed a but in the layout (reversed key order in row)
* compiles but is not working
* still testing 5291
* fixed a but in the layout (reversed key order in row)
* fixed some issues
* doumentation needed
* doumentation needed
* documentation needed
* documentation needed
* Update readme.md
documentation
* Update readme.md
i dislike markdown <_>
* merge preperation
* Enable 4x4 and 5x5 community keymap support
* Pull 4x4 community keymap fixes from @noroadsleft
* Build fixes for guidoism keymap - move keymap to layouts/community/planck_mit as it uses the LAYOUT_planck_mit macro
* remove clmk and dvrk and backlight; switch esc and enter to be modtap; add meh key
* change songs
* space cadet; move enter; move '"; move pgup pgdn
* remove extra songs
* update from noahfredrick keymap
* make it easier to type ../../thing/*/*
* move pipe
* requested changes
* add interrobang support
* add shift-insert to raise-v and lower-v, move pipe to raise-/lower-n
* Adding my new keymap, based of xd75, with leds enabled via the rules.mk file
* cleaned up the rules file
* Per Change Requests: removed deprecated functions along with updated the map to use the layout macro instead of raw matrix
* Fix firmware to work with latest Wilba changes (i.e. dynamic keymap) and M60a.
* Get back RGB Backlight codes.
* More tweaks.
* Update users/talljoe/rules.mk
Co-Authored-By: Talljoe <jwasson+github@gmail.com>
* Include both base keyboards
* Merge the keymap
* Merge the configs
* Add wiring diagram for clarity of documentation
* Merge rules
* Merge keyboard sources
* Change names to compile
* Update documentation to suit
* Add qwerty layout to 108keyTrackpoint
* Separate the dvorak standard layout from a media focused one
* Update documentation to reflect new keymaps
* [style] Add empty lines at ends of files
* [style] Meet current QMK style guide
* Bring READEME closer to the QMK template
* [style] Change all "108keyTrackpoint" to "108key_trackpoint"
* [style] Use "LAYOUT" instead of "KEYMAP"
QMK terminology has changed
Co-Authored-By: mkem114 <20897849+mkem114@users.noreply.github.com>
* Add two spaces after maintainer in README
This is required to render properly
Co-Authored-By: mkem114 <20897849+mkem114@users.noreply.github.com>
* Remove redundant line
"PREVENT_STUCK_MODIFIERS" is default on for QMK
Co-Authored-By: mkem114 <20897849+mkem114@users.noreply.github.com>
* Change include of keymaps to use QMK_KEYBOARD_H
This includes automatically
* Update make rules to match template
* Change from KC_MENU to KC_APP
The button functionality actually wanted is the context menu key
* [style] Change "dvorakMedia" to "dvorak_media"
* Update README to reflect minor changes
The debounce filtering reports a key/switch change directly, without any extra delay. After that the debounce logic will filter all further changes, until the key/switch reports the same state for the given count of scans.
So a perfect switch will get a short debounce period and a bad key will get a much longer debounce period. The result is an adaptive debouncing period for each switch.
This value defines how often the same key/switch state has to be detected in successive reads until the next key state can be reported.
In other words this value defines the minimum debouncing period for a switch.
* Add TKL JIS layout for Pegasus Hoof
Tested with a JIS Majestouch 2 TKL
* Add default_jis keymap for Pegasus Hoof
* Remove unnecessary keycode definition
* Remove legacy fn_actions in favor of MO(1)
* Remove unnecessary build directive
* fix to prime o keymap
* changed ortho keymaps
* added some symbols to lower layer
* set lower to be a higher layer than raise
* added split layout option with center numpad to prime_o keymap
* added some gaming functionality
* added alt f4 ortho keymaps and userspace
* fixed small error
* fixed arrow keys and left control
* added right shift
* latest version
* reverted arrow keys
* edited readme
* added osu layer
* updated osu layout
* updated osu layout
* added full arrow keys to osu layout
* in case i mess up creating macros
* added the best meme key in the world
* added plover steno layer
* updated boy314 layout
* removed unused layers
* added boy314 xd75 layout, inspired by preonic layout
* added boy314 xd75 layout, inspired by preonic layout
* version 2 of boy314's xd75 layout
* added readme notes
* updated readme for boy314 xd75 layout
* qwerty support, brackets on bottom row, caps lock underglow
* fixed readme/
* small changes to allow merging
* minor changes to format
* fixed up default readme
* added numpad and tweaked bottom row
* Move 68keys keymap to mf68 folder
* Remove 68keys keyboard now its been migrated to mf68 keymap
* Migrate 68keys build config to mf68 keymap overrides
* Add 412-64 keyboard firmware
It's pretty barebones for now, but the Model 00 is also a pretty barebones machine. Model 01 won't be better, but plenty of pins exist for things like LEDs on Model 02.
* MANU/PROD ID changes.
Changed around the MANUFACTURER and PRODUCT IDs to be more polite when viewed in qmk toolbox.
* Fixing PROD again.
For the love of all that is good and holy, that was ugly. This new one looks better. This stuff matters to me for some reason.
* Yep, updating MANU again.
There we go. That's better - From my name to my "design firm".
* Update keyboards/412_64/keymaps/default/keymap.c
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Update keyboards/412_64/rules.mk
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Update keyboards/412_64/rules.mk
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Update keyboards/412_64/rules.mk
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Update keyboards/412_64/rules.mk
Co-Authored-By: FateEverywhere <41215461+FateEverywhere@users.noreply.github.com>
* Refactored M6-B to use Zeal60 RGB backlight code
* Fixed M6-B LED co-ordinates
* Minor changes to RGB config for Zeal65
* Added dynamic keymaps to WT80-A, WT60-A, WT-80A, U80-A
* initial commit for kbd67 keyboard
* add in a standard matrix
* get the correct matrix for layout_all
* add a layout_65_ansi LAYOUT macro
* get a default keymap in
* add caps lock led support
* fix formatting of my name in the comments
* add QMK Configurator support
* turn on bootmagic
* Starting point for blue pill based practice60
* Changes
* add
* try raw bin no botloader
* swap back to bootloader version
* edit
* Remove debug LED flash
* Disable JTAG to open up B3 and B4
* Add led backlight support (no breathing yet)
* Update matrix for correctness
* RGB Underglow working in a very simple state
* not as bright
* Move to handwired
* revert ChibiOS_Test changes
* Changes based on PR comments
* Address PR comments v2
* Move files
* Fix up screen off timer of helix
* Fix Up ScreenOffInterval exceeded uint16_t
* Fix Up never waking up once screen off if in case of matrix are not dirty
* Changing referenIng incorrect constant name
* OLED_ENABLED => SSD1306OLED
* Improve internal processing of process_record_kb()
* Use the return value of process_record_gfx()
* Move a include statement into #ifdef block
Move #include "ssd1306.h` statement into #ifdef block
* Move process_record_kbI()
Move process_record_kb() from helix.c to rev1.c/rev2.c/pico.c
* Move process_record_kb()
* fix about screen off timer
* Fix Up ScreenOffInterval exceeded uint16_t
* Fix Up never waking up once screen off if in case of matrix are not dirty.
* Revert "fix about screen off timer"
This reverts commit 3d175f2340c14250a71af78afec5a1e890d9f4e7.
* Fix up screen off timer of crkbd
* Fix Up ScreenOffInterval exceeded uint16_t
* Fix Up never waking up once screen off if in case of matrix are not dirty.
* Fix up screen off timer of helix
* Fix Up ScreenOffInterval exceeded uint16_t
* Fix Up never waking up once screen off if in case of matrix are not dirty
* Revert "Fix up screen off timer of helix"
This reverts commit f0efb82443a7dc34b75579359b0514e8bfa51100.
* Improve internal processing of process_record_kb()
* Use the return value of process_record_gfx()
* Fix a indent
Fix a indent
* Remove unnecessary re-definitions for XXXXXXX and _______
* Update 6lit to use KC_NO in layout macros
* Update rules.mk to follow current template
* Remove use of deprecated function action_get_macro - unused and contents were from old template
* Remove use of deprecated function action_get_macro - all code was commented out
* Remove use of deprecated function action_get_macro - convert macro to use process_record_user
* Convert keymap to consistent use of _______
* fix use of old style header guards
* Swap KC_NO for XXXXXXX macro since the swap to the macro for KC_TRANS
* Resolve use of ?= in rules.mk files
* Remove duplication of rules.mk and config.h in gherkin mjt keymap
* Remove unnecessary #includes
* Align layout macros so foobar can use gherkin keymaps
* Align 6lit layout macros with foobar
* Remove ifndef QUANTUM_DIR from keymaps
* Initial 25 port
* Initial 25 port - fix info.json and hand_swap_config
* Review comments - fix layout macros, copyright comments, and duplicated use of layering macros
* initial commit
* put my name everywhere
* get the switch matrix correct
* add a basic keymap
* use a better LAYOUT macro
* update readme
* Add QMK Configurator support
* Added support for backlight , and a UK iso layout
Added support for backlight , and a UK iso layout. Now uses the SPLIT_KEYBOARD #define rather than relying on lets split
* Update keyboards/diverge3/keymaps/isoUK/keymap.c
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/isoUK/keymap.c
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Simplified the lower layer
Simplified the lower layer
* dir rename to snake case
dir rename to snake case
* changed dir case
changed dir case
* Update keyboards/diverge3/rules.mk
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/config.h
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/config.h
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/keymap.c
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/keymap.c
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/keymap.c
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/config.h
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/config.h
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/config.h
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* Update keyboards/diverge3/keymaps/iso_uk/config.h
Co-Authored-By: mcmadhatter <mcmadhatter@hotmail.com>
* aligned and tidyied up
aligned and tidyied up
* dlg's keymap
* fix list order
* remove cruft
* pragma
Co-Authored-By: dlgoodr <dlg@dsrw.org>
* turn on bootmagic, enable swapping ` and Esc while I figure out which compromise is least bad
* Initial move of 40percent.club boards to common parent folder.
* Refactor readme files to be consistent
* Refactor readme files to be consistent - fix make command examples.
* Refactor readme files to be consistent - align readme filenames.
* Refactor readme files to be consistent - fix repo url.
* Disable Community keymap builds as they are currently failing due to missing functionality
* Move more of 40percent.club boards to common parent folder.
* Refactor readme files to be consistent - align readme filenames.
* Refactor readme files to be consistent - fix make command examples.
* Preliminary 30wer firmware. Not tested on real board yet.
* Added a layer to default 30wer keymap.
* Wrote readme for 30wer.
* Added 30wer info.json.
The new simple API can be selected.
Previous version, can select two way.
* use old API (compatible with let's split serial.c)
* use new API (multi-type transaction)
This version, can select three way.
* use old API (compatible with let's split serial.c)
* use new API (single-type transaction)
* use new API (multi-type transaction)
There is no change in the code generated by this change.
* Use Magic+Esc for entering bootloader mode
* Expand rules.mk
* Improve FN_RCTL tap dance
* Avoid one-line if statements
* Add PROGMEM to keymaps definition
* td_fn_rctl_* → td_fn_rctrl_*
* Fix FN_RCTL tap dance bug when count is 4, 8, 12 etc.
* Add ACTION_TAP_DANCE_DOUBLE_MODS
* Rearrange/rename keycode defines
* Use RAL_RGU and RCT_RSF in keymaps
* Replace keymap ASCII art with box drawing characters
* Add FN_FNLK and use it
* Set Unicode input mode in eeconfig_init_user instead of matrix_init_user
* Update userspace with common config.h
* Add my dz60, satan and xd75 keyboard keymaps
* Fixing executable bits changed during last upstream merge
* Cleanup unnecessary files and defines
* Remove unnecessary defines from userspace config
* Add underglow controls to dz60 function layer
* Fixing merge conflicts
* Fixing exectable bits changed during merge
After further testing and feedback from others, the bottom row matrix was incorrect. Also RGB number was incorrect (I was tired when building this, really shouldn't do that).
* converter/adb_usb: Configurator support
Note: LAYOUT_ext_ansi has a blank space between the Spacebar and the
Right Alt/Option key when loaded in the Configurator. This is
deliberate.
Stock Apple Extended Keyboards and AEK IIs send the scan code for Left
Command when either Command key is used. (This is noted already in the
readme.) That being the case, the Command keys cannot be assigned to
different functions. Whichever keycode is placed on Left Command will be
used for both Command keys.
* converter/adb_usb: adb_usb.h cleanup
- replaced KEYMAP_COMMON_H with ADB_USB_H
- white space changes for visual alignment in LAYOUT_ext_ansi macro
* port over Rozakiin https://github.com/Rozakiin/Noxary_Firmware/tree/master/noxary_x268
* rename LAYOUT to LAYOUT_65_ansi default layout
* add configurator support
* add community layout support
* put Rozakiin's name everywhere
* update readme
* problems with the 65_ansi keymap to be diagnosed later
* Keymap: add jyh levinson keymaps
remove tap dance number keys due to sluggish responses
simplify I2C configuration
reverse hyper and meh positions
reduce tapping term to allow fast typing with mod tap space keys
remove Alt hold on right space key. too many false touches.
add vim-style arrows (hjkl) on asdf; semicolon/quote on raise
correct documentation string for jyh levinson layout
add alternative levinson layout for jyh
more inspiration from atreus keyboard. keeps shift in the expected
places. reduces number of layers. puts numpad layout easily
accessible. places important keys on palms and meta keys on top
corners for xmonad.
correct layer switching in jyh2 levinson layout
I was getting stuck on the numpad layer because the numpad hold key
was remapped once the layer was activated. Bad idea. Minor other
refinements.
use curly bracket { instead of brace [ on raise layer
add RGB keys on adjust layer
bootmagic key is confusing. turn it off.
try out permissive hold setting to make mod-tap better
remove hold for right control on quote key. too many mistakes
turn off permissive hold. it was causing unexpected behavior
enable rgb underglow animations
add make it pink/blue key to levinson layout
prevent stuck modifiers in jyh2 levinson keymap
* fix up deprecated code after code review
* remove PREVENT_STUCK_MODIFIERS because it is default
Co-Authored-By: yamad <jyamada1@gmail.com>
* added initial config files for vinta
* added readme
* changed product id and device ver
* fixed keymap illustration
* updated rules.mk to enable more commands
* removed a bunch of pre-code text; changed some grammar woopsies
* removed bootmagic lite
* updated developer's note
* updated readme.md
* Initial commit of guidoism
* created movement layer
* movement layer works!
* removed unnecessary layers
* moved enter key up and recreated caps lock
* cleaned up
* num pad
* checkpoint
* checkpoint
* checkpoint
* Added num pad
* changed max power draw so i can use this on ipad
* move around quotes
* added tri layer for a homed numpad
* moved layout to new style
* Update readme.md
* Update readme.md
* Update readme.md
* Update readme.md
* added keys to unicode conversion
* removed adjust layer since its not used anymore
* moved esc to seperate key
* tweaked python
* checkpoint
* new code put into function
* new code put into function
* cleanup
* cleanup
* new code works perfect
* removed old code
* removed old code
* generate_c.py now replaces code within keymap.c
* added function layer
* updated readme
* updated readme
* updated readme
* updates readme
* updates readme
* updates readme
* Tweaks based on CR
* Remove old guidoism
* Use MO(_FUNCTION) directly
* layer locked breathing, layer changed brighter leds
* move config for tapping term into config.h
* Respect LED off even with layer indicators, add readme and update config
to new standard
* update Readme with note about both sides of board being required to flash
When comparing the pins in this file to the Ergodox Infinity schematic, it seems that the first section is describing the rows and the second section is describing the columns.
- config.h deleted (file was redundant)
- layout macro LAYOUT_JD45 removed (identical to new macro LAYOUT)
- ../../config.h include line redundant due to past changes to build script
- keymap.c
- updated to use macro LAYOUT
- redundant KC_TRNS and KC_NO definitions removed
patrickmt
Michael
noroadsleft
Vyolle
MakotoKurauchi
zer09
marksard
ajp10304
Nico Hormazábal
ishtob
Sebastian Spieß
Alex Mayer
Jason Thigpen
milestogo
Drashna Jaelre
Snipeye
Ivan Choi
jtcarrasco
zvecr
Nicholas Shaff
Jarrett Drouillard
wanleg
Ismael Venegas Castelló
Legonut
Yan-Fa Li
VM
Luciano Malavasi
epaew
MechMerlin
Erovia
Wilba
GO
zfhrp6
Erez Zukerman
Konstantin Đorđević
John Pettigrew
abishalom
Mattia Dal Ben
Takeshi ISHII
zvecr
zgtm
listofoptions
mwpeterson
Elliot Powell
Will Homer
Colin Kahn
xjacobx
Jasper Lievisse Adriaanse
Milton Griffin
Joe Wasson
Michael Kemp
Nick Piazza
Michael Graf
Maarten Dekkers
Charlie McMackin
SpacebarRacecar
Boy_314
Pekaso
FiNeXdesign
FateEverywhere
Andrew Kannan
comaid
Logan Bussell
gorbachev
Logan Huskins
mcmadhatter
dlgoodr
Filip Sund
Ryoichi KATO
Abhinav
Danilo Vulicevic
Danny
TheOneTrueTrench
Monksoffunk
Sean Dwyer
tcatkins99
Jeremy Herve
Jarred Steenvoorden
TurboMech
Kosuke Adachi
Jack Humbert
ENDO Katsuhiro
Michael Pio
Jason Yamada-Hanff
noroadsleft
Daniel Shields
Žan Pevec
Bramver
jshuf
Guido Bartolucci
akrob
yiancar
gromwalh