Keyboard: Add 30wer config and keymap (#4386)

* Preliminary 30wer firmware. Not tested on real board yet.

* Added a layer to default 30wer keymap.

* Wrote readme for 30wer.

* Added 30wer info.json.
master
Filip Sund 2018-11-09 00:12:42 +01:00 committed by Drashna Jaelre
parent 5eb69ca224
commit ef84bd9799
7 changed files with 190 additions and 0 deletions

View File

@ -0,0 +1 @@
#include "30wer.h"

View File

@ -0,0 +1,14 @@
#pragma once
#include "quantum.h"
#define LAYOUT( \
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b \
) \
{ \
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c }, \
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b } \
}

View File

@ -0,0 +1,31 @@
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x1234
#define PRODUCT_ID 0x5678
#define DEVICE_VER 0x0000
#define MANUFACTURER 8o7wer
#define PRODUCT 30wer
#define DESCRIPTION Gherkin style construction 30% staggered pcb kit
/* key matrix size */
#define MATRIX_ROWS 3
#define MATRIX_COLS 13
/* pcb default pin-out */
#define MATRIX_ROW_PINS { E6, B4, B5 }
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D1, D0, D4, C6, D7 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* prevent stuck modifiers */
#define PREVENT_STUCK_MODIFIERS

View File

@ -0,0 +1,51 @@
{
"keyboard_name": "30wer",
"url": "",
"maintainer": "qmk",
"width": 13.25,
"height": 3,
"layouts": {
"LAYOUT": {
"layout": [
{"label":"Tab", "x":0, "y":0},
{"label":"Q", "x":1, "y":0},
{"label":"W", "x":2, "y":0},
{"label":"E", "x":3, "y":0},
{"label":"R", "x":4, "y":0},
{"label":"T", "x":5, "y":0},
{"label":"Y", "x":6, "y":0},
{"label":"U", "x":7, "y":0},
{"label":"I", "x":8, "y":0},
{"label":"O", "x":9, "y":0},
{"label":"P", "x":10, "y":0},
{"label":"Bksp", "x":11, "y":0},
{"label":"Delete", "x":12, "y":0, "w":1.25},
{"label":"Ctrl", "x":0, "y":1, "w":1.25},
{"label":"A", "x":1.25, "y":1},
{"label":"S", "x":2.25, "y":1},
{"label":"D", "x":3.25, "y":1},
{"label":"F", "x":4.25, "y":1},
{"label":"G", "x":5.25, "y":1},
{"label":"H", "x":6.25, "y":1},
{"label":"J", "x":7.25, "y":1},
{"label":"K", "x":8.25, "y":1},
{"label":"L", "x":9.25, "y":1},
{"label":":", "x":10.25, "y":1},
{"label":"\"", "x":11.25, "y":1},
{"label":"Enter", "x":12.25, "y":1},
{"label":"Shift", "x":0, "y":2, "w":1.75},
{"label":"Z", "x":1.75, "y":2},
{"label":"X", "x":2.75, "y":2},
{"label":"C", "x":3.75, "y":2},
{"label":"V", "x":4.75, "y":2},
{"label":"B", "x":5.75, "y":2},
{"label":"N", "x":6.75, "y":2},
{"label":"M", "x":7.75, "y":2},
{"label":"<", "x":8.75, "y":2},
{"label":">", "x":9.75, "y":2},
{"label":"?", "x":10.75, "y":2},
{"label":"Space", "x":11.75, "y":2, "w":1.5}
]
}
}
}

View File

@ -0,0 +1,17 @@
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT( \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, \
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, LT(1, KC_SPC) \
),
[1] = LAYOUT( \
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_UP, KC_DEL, \
_______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, \
KC_LALT, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______ \
),
};

View File

@ -0,0 +1,16 @@
30wer by 8o7wer
===
![30wer](https://i.imgur.com/ZYbRvY7.png)
Keyboard Maintainer: [Filip Sund](https://github.com/FSund)
Hardware Supported: Pro Micro
Hardware Availability: Group buy
More info in the [group by thread at Keebtalk](https://www.keebtalk.com/t/gb-30wer-by-8o7wer/3618/).
Make example for this keyboard (after setting up your build environment):
make 30wer:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,60 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.