Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add initial implementation of 5 keyboards supported by the OverNumpad Controller.
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Apply changes similar to other code review suggestions.
* Apply suggestions from code review
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Apply changes similar to other code review suggestions.
* overnumpad controller info.jsons: update maintainer and url.
* classic_ultracl_pre_2013: added support for the default 'fullsize_ansi' layout
* classic_ultracl_pre_2013: moved the order of the iso enter key in the layout macro to be considered to be on the bottom row, like in the default fullsize_iso layout. Rename the iso layout to fullsize_iso, and enable it in rules.mk
* Removed QMKBEST and QMKURL
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Deleting empty files
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Moved gergoplex to seperate PR
* vendor + cformat
* Update keyboards/gboards/k/gergoplex/matrix.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* lifiting keyboards up
* Update readme.md
* Update keyboards/gboards/gergoplex/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* remove English dicts
* cformatted
* Prettify keymap
* Remove via keymaps
Via doesn't support chords/combos, and this makes the keymap on such a
small keyboard quite uncomfortable and incomplete.
* Address QMK pull code review notes
* Cleanup (tabs, excessive comments)
* Fix keymap typos
* Use enum to define layers
* Multiple changes
- got rid of LAYOUT_kc in favour of LAYOUT_split_3x5_3
- fixed matrix custom C code to build with updated external dependencies (gcc)
- fixed used combo docs
keyboards/gboards/gergoplex/matrix.c:189:9: error: implicit declaration of function 'phex' [-Werror=implicit-function-declaration]
phex(row);
^~~~
keyboards/gboards/gergoplex/matrix.c:191:9: error: implicit declaration of function 'pbin_reverse16'; did you mean 'print_bin_reverse16'? [-Werror=implicit-function-declaration]
pbin_reverse16(matrix_get_row(row));
* Remove apparently redundant macros
* Replace direct pin control with IO functions
* config mouse enable and combo delay fix
The default delay is 200:
#define COMBO_TERM 200
how long for the Combo keys to be detected. Defaults to TAPPING_TERM if not defined.
tmk_core/common/action_tapping.h|22| 13:# define TAPPING_TERM 200
* Remove redundant defines
* Unambiguously refer to the Special layer
* Fix formatting
* gboards/gergoplex set IGNORE_MOD_TAP_INTERRUPT
This solves my issue was with KC_CTL_A working correctly and it was set in @germ's repo
39c86e080d/keyboards/gboards/k/gergoplex/config.h (L49)https://beta.docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt
* Name change
See commit 581368596e
* Wording change
* Update keyboards/gboards/gergoplex/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add copyright headers
* Fix debounce type
| avr-gcc: error: .build/obj_gboards_gergoplex_default/quantum/debounce/eager_pr.o: No such file or directory
* Implement colemak-dhm keymap
Co-authored-by: Germ <jeremythegeek@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Brian Tannous <Brian@BrianTannous.com>
* update grid alignment of keycodes
* update key assignments on via keymap
A seemingly-misplaced key assignment on Layers 1 through 3 of the via keymap led to keys being off by one in comparison to the default keymap.
* switch Backslash and Backspace on via keymap base layer
Matches the via keymap's key mapping to that of the default keymap.
* use QMK 3-character notation in oxalys80.h
* add matrix diagram; remove Planck reference
* add LAYOUT_tkl_ansi and LAYOUT_tkl_ansi_wkl layout macros
* add LAYOUT_tkl_ansi_tsangan macro
* add ISO layouts
Add LAYOUT_tkl_iso, LAYOUT_tkl_iso_tsangan, and LAYOUT_tkl_iso_wkl macros.
* enable Community Layouts support
* tidy up rules.mk
* readme tidy-up
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Wolf Van Herreweghe <wolfvh@getupgamesofficial.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ash <ash@splitpixel.co.uk>
* Added new keymap for crkbd/rarick
* Delete flash.sh
Deleted rarick crkbd flashing script, as it will not be used by most users.
* Applied feedback, and fixed build error caused by builder updates
* Update keyboards/crkbd/keymaps/rarick/config.h
Removed USE_MATRIX_I2C, no longer used.
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* grid-align keycodes; use short-form keycodes
No logic change.
* info.json: correct layout macro reference
* info.json: correct LAYOUT_64key data
Removes an extra key from the layout data.
* 64_ansi Community Layout support
* rename LAYOUT_64key to LAYOUT_64_ansi (with alias for backwards compatibility)
* add LAYOUTS = 64_ansi to rules.mk
* remove width and height keys from info.json
* 60_tsangan_hhkb Community Layout support
* rename LAYOUT to LAYOUT_60_tsangan_hhkb
* add LAYOUTS = 60_tsangan_hhkb to rules.mk
* correct maintainer field in info.json
* remove width and height keys from info.json
* fix GitHub account link on readme
* 65_ansi_blocker Community Layout support
* rename LAYOUT to LAYOUT_65_ansi_blocker (with alias for backwards compatibility)
* add LAYOUTS = 65_ansi_blocker to rules.mk
* remove width and height keys from info.json
* [Keyboard] Add some last minute tweaks to Work board
* Additional fixes
* Fix rgb pin
* Fix ws2812 hackery
* additional led tweaks
* Add indicator LEDs
* fix bootmagic settings
* Fix up RGB stuff
* Limit power draw for entire board
* fixup lights and such
* change LED order on loop
* Fix indicators if via is not enabled
* Enable Sleep for rgb matrix
* Even more LED tweaks
* Final tweaks?
* Tweak keycodes
* apply human-friendly formatting to info.json
* update key labels; correct maintainer field
* add LAYOUT_all data to info.json
* remove width and height keys from info.json (per fauxpark)
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add keyboard Q1
* Update keyboards/keychron/q1/readme.md
* Update keyboards/keychron/q1/rev_0100/rules.mk
* Update keyboards/keychron/q1/readme.md
* Change layer switch function to "default_layout_set"
* Update keyboards/keychron/q1/rev_0100/info.json
* Update keyboards/keychron/q1/q1.c
* Mask out the DIP switch to fix sleeping issue when switch is ON
* Added and changed readme.md
Added keyboards\q1\rev_0100\readme.md
Changed keyboards\q1\readme.md since different MCU may used in other version.
* update
* update keymap name
* update keymap for keychron/q1/rev_0102
* Update info.json
This patch corrects 2 issues with the LED matrix of the KDBFans KBD67 Lite (v3)
* Incorrect mapping of the right-shift, down-arrow, and right-arrow. (i.e. `NO_LED` positions of the `g_led_config` key matrix in the .c file do not match the `LAYOUT_65_ansi_blocker` matrix in the .h file.
* Remapping of the *LED Index to Physical Position* using physical measurements from actual keyboard and accounting for the southpaw LED position to define the true centre of the keyboard (more relevant to circular animations).
* Make solo half of split keyboards (more) usable.
Using only one half of a split keyboard (that's using the split_common
framework to communicate) is not a great experience, since several read
timeouts per scan cycle cause an unusably slow scan rate.
This change blocks all split communication attempts for 500 ms
(configurable) after an error occurs, causing the scan rate to become at
least _more_ usable, but might need some tweaking to work fully on most
keyboards. One read timeout still needs to occur after the 500 ms has
passed, and if that timeout isn't low enough, some scan cycles may still
be too slow.
* Fix lint complaint.
* Require 25 consecutive comm errors to see comms as disconnected.
The number of max errors can be overridden by defining
`SPLIT_MAX_CONNECTION_ERRORS`.
* Add comments to new defines, and ability to disable disconnection check.
Also increase `SPLIT_MAX_CONNECTION_ERRORS` to 40, since it's divisible
by most relevant numbers for the description.
* Make lint happy ...again
* Only update `connection_check_timer` when needed.
* Add new defines to split keyboard documentation.
* Move connection timeout logic to transport.c, add `is_transport_connected`.
* Use split_common disconnection logic in matrix.c.
Instead of doing more or less the same thing twice.
* Move disconnection logic to `transport_master`.
Is a cleaner implementation, and causes the scan rate while disconnected
to increase instead of decrease.
* Lint fixes.
* Lower default `SERIAL_USART_TIMEOUT` to 20 ms.
The read timeout must be low enough to not cause exessively long scan
cycles when using a solo split half. 10 ms was determined from testing
to work fine even with the slowest defined baudrate of 19200 (5 ms was
too low for that case), so 20 ms should be fine for most cases.
* Remove `SERIAL_USART_TIMEOUT` from ergodox_infinity/config.h
Was somewhat mistakenly included in an earlier PR.
* Fix building with `USE_I2C`.
* Reduce built firmware size.
Not really sure why this works, the idea was taken from tzarc's work on
split disconnection.
* Tweak and improve opt-out for split disconnection logic.
There are now two ways to opt out from this feature:
* Set `SPLIT_MAX_CONNECTION_ERRORS` to 0. This will completely disable
the connection status checks (also affects the slave matrix reset logic in
matrix.c, though).
* Set `SPLIT_CONNECTION_CHECK_TIMEOUT` to 0. This will only disable the
communication throttling while disconnected. Will make the firmware
smaller.
* Make split disconnection logic work with custom transports.
Includes a fallback implementation for keyboards using a custom
split_util.c but not a custom matrix.c (currently no such keyboard seems
to be merged, though).
* Remove unnecessary include of timer.h
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Fill the oleds with right mods
* Enable double mods on x32 oleds
* Disable forced NKRO
* Make oleds fancy only on good MCUs
* Overhaul oled display
* Further enhance oled, with kitty!
* Final oled form
* Not working transport
* Transport id of woring
* Add acceleration
* fix button placement for accel macro
* Fix accelartion location and behavior
* Remove OLED sync code
* Fix alignment issue
* Remove audio hack
* Fix up zima keymap
* Add matrix slave scan function and cleanup drashna.h
* Clean up user space
* Allow userspace sync to be disable-able
* Fix weird issue with audio
* Fix alignment issue with user split sync
* Disable second rgb matrix task
* Disable additional animations
* Change dynamic keymap settings
* Hacky fix for borked corne
* Add Blackpill (F411) support to tractyl manuform
* remove manual via eeprom reset
* Remove all references to rgblight twinkle
* Fix issues with config processing
* rename LAYOUT to LAYOUT_all
* add info.json
* override DYNAMIC_KEYMAP_LAYER_COUNT for via keymap
The via keymap only initialized two layers without overriding the default value of DYNAMIC_KEYMAP_LAYER_COUNT (4).
This commit sets DYNAMIC_KEYMAP_LAYER_COUNT for the via keymap to 2.
* noah_avr.h: use QMK 3-character notation for matrix positions
* Community Layout support, Stage 1
- rename LAYOUT_ansi to LAYOUT_65_ansi_blocker
- rename LAYOUT_ansi_splitbs to LAYOUT_65_ansi_blocker_split_bs
- enable Community Layout support
* info.json: add line breaks between rows
* info.json: correct LAYOUT_iso data
- unsplit the Backspace
- change ANSI Enter to ISO Enter
- split the left Shift
* Community Layout support, Stage 2
- rename LAYOUT_iso to LAYOUT_65_iso_blocker
- update Community Layout support
* Community Layout support, Stage 3
- add LAYOUT_65_iso_blocker_split_bs
- update Community Layout support
* noah_avr.h: add matrix diagram
* info.json: human-friendly formatting
* info.json: remove "w":1 instances
* info.json: correct positions of Left, Down and Right Arrow keys
* info.json: add LAYOUT_all data
* move Home key to end of home row
According to photographs of the keyboard, the fourth key down on the right side is physically on the home row. This commit moves the key argument and keycodes to the home row.
* whale75.h: use QMK 3-character notation for matrix
* whale75.h: add matrix diagram
* add keyboard-level encoder functionality
* info.json: correct key sequence on ISO layouts
* Update keymap & readme
-Keymap.c: Key combinations removed for resetting and added a new way to reset. Also removed unused timer code.
-config.h & rules.mk: Removed on kemap level (these were there for the key combo's)
-Readme.md: Changed the preview image and changed the description to reset the keyboard. Also added what connector type is used.
* Update readme.md
Better wording on how to get the keyboard in bootloader mode
* Update keymap.c
Switched + and - around, same with / and *.
* add info.json for Quefrency rev1
* add info.json for Quefrency rev2
* add info.json for Quefrency rev3
* add info.json for Quefrency rev4
* remove "global" Quefrency info.json
* remove layout macro aliases from keyboard headers
These were moved into the info.json files.
* rename layout macros
The existing layout macro names were not accurate to QMK's standard for the names that were given.
- rename LAYOUT_65_ansi_blocker to LAYOUT_65_ansi_blocker_split_bs
- rename LAYOUT_65_iso_blocker to LAYOUT_65_iso_blocker_split_bs
* correct info.json data
* add LAYOUT_65_iso_blocker
* add LAYOUT_65_ansi_blocker
* add Community Layout support
* update grid alignment on layout macros
* add LAYOUT_all
* refactor default and via keymaps
- use LAYOUT_all macro
- use _______ for KC_TRNS
- via keymap fixes
- swap KC_BSPC for KC_DEL on Layer 1 (matches default keymap)
- remove KC_PGUP from Layers 2 and 3 (makes both layers fully transparent)
* Add config.h and rules.mk support for data driven keymaps
* tidy up after rebase
* Rename key as it can contain more than just keyboard overrides
* tidy up after rebase
* Add validation
* Added gmmk pro paddlegame keymap
* Replaced config.h with my own
* Adjust code to better fit style guide
* Update readme to include layout
* Fixed keymap, was missing a few keys
* Replaced all instances of _isWinKeyDisabled with keymap_config.no_gui
* Update keyboards/gmmk/pro/ansi/keymaps/paddlegame/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Tomas Guinan <bngrybt@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Fixup massdrop/alt.
* Fixup `cest73/tkm` bootmagic lite.
* Update keyboards/cest73/tkm/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add digitizer HID interface for setting the mouse cursor position at
absolute screen coordinates. Tested on Pro Micro, Proton C and
Blackpill.
* Update docs/feature_digitizer.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update tmk_core/protocol/usb_descriptor.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add missing copyrights
Add V-USB support
* Add support for digitizer dedicated endpoint for lufa and chibios.
Fix formatting issues
Move digitizer_task definition to the feature's base implementation file
* Run cformat on modified files
* Change digitizer report usage to Digitizer instead of Pen to avoid
pointer disappearing on Windows.
* Update tmk_core/protocol/vusb/vusb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Run cformat from docker image
* Remove send_digitizer from host_driver_t and instead rely on the
declaration being the interface to the implementation in each
HW-specific usb implementation.
* Fix build : send_digitizer shouldn't be static in vusb and add
weak-linkage implementation for tests without usb implementation
* Change digitizer user interface to match pointing device's
* Update documentation with new API
Co-authored-by: a-chol <nothing@none.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Drashna Jaelre
Blake
Sets3n
Brandon Claveria
Caleb Lightfoot
Vinam Arora
kopibeng
milostatsea
WiZ.GG
Pylon
precondition
James Smith
Salicylic-acid3
zhouqiong19840119
Laneware
bt66tech
qpockets
3araht
Purdea Andrei
Phil Pirozhkov
Ryan
Ben Lipson
XScorpion2
im a can what do you think lmao?
Jakob Weickmann
James Young
peott-fr
Konstantin Đorđević
Jack Humbert
Ramya Challa
MakotoKurauchi
kaylanm
Bahrul Hidayat
Elliot Powell
Lui Wolff
Jordan Duabe
Dao Tak Isaac
john-ezra
Takeshi ISHII
X-Bows Tech
Matt
Andy Yong
r-pufky
Álvaro A. Volpato
Jos Boersema
Vino Rodrigues
Felix Jen
yulei
Albert Y
IFo Hancroft
Dan Nixon
moyi4681
Wolf Van Herreweghe
bomb
jmcwilliams403
ぺらねこ
drhigsby
Carlos Martins
stanrc85
Xelus22
Ananya Kirti
John Mueller
alittlepeace
Seth
rhmokey
Sebastian Laube
AnthonyNguyen168
yfuku
AKiwi92
rarick
Zac Moulton
Uy Bui
Malevolti
mechlovin
Ethan Yates
Gastón Jorquera
Keenan Brock
Joel Challis
jackytrabbit
Gabriel Bustamante
Rifaa Subekti
shiftux
Monksoffunk
kb-elmo
jhauh
jonavin
hvp
Christian Eiden
Jay Greco
Casey Webster
Andre Brait
Ibnu Daru Aji
Danny
dogspace
Vincent Vorholter
J.Flanagan
Trent Hoh
Weirdo
QMK Bot
jpuerto96
Charles
8bits4ever
MechMaster48
Yoichiro Tanaka
GG
Christian Sandven
stickandgum
lalalademaxiya1
Donald Kjer
Nick Brassel
npspears
Conor Burns
peepeetee
Joakim Tufvegren
tiltowait
SneakboxKB
minibois
Yaroslav Smirnov
weteor
jfescobar18
Alan Pocklington
Evelien-Lillian Dekkers
Zereef
yiancar
Tran Kim Tung
rate
AquaCylinder
Logan Butler
AnthonyL
Matthias Liffers
Tomas Guinan
Mikael Manukyan
a-chol