Avoid the generic "you are not allowed to change" message,
and instead allow check_canedit to propigate out useful error messages.
Went back to calling check_canedit in fatal mode, but added a parameter to
avoid calling the troublesome subs that might cause a login attempt.
Since it already looks for things starting with a dot, I was able to avoid
matching against the string twice.
This also fixes a minor bug; $from may not be defined. Avoid uninitialized
value warnings in this case.
template_depends was adding a dependency on the source filename,
instead of on the page name when a template is a page. Such a
dependency doesn't work.
Cleanly fixed case where destdir file failed to be written because there
was a directory with the same name. This can be detected with no extra
system calls, and dealt with by finding all pages that wrote files
inside the directory, and removing them and the directory.
The other, inverse case would be expensive to detect in will_render,
since it would need to check each parent directory of the file to see
if the directory is really a conflicting file. But prep_writefile
already does a similar scan for symlinks in the path, so I added code
there to remove the conflicting file. This fix assumes that the file
is written using writefile, and not some other means (but using other means
would be a security hole too, so hopefully nothing does).
There are two sub-caces. If both source files still exist, the winner that
renders the destination file is undefined. If one source file is deleted
and the other added, in a refresh, the new file will take over the
destination file.
Set it to true every time IkiWiki::filter is called on a full page's content.
This is a much nicer solution, for the po plugin, than previous whitelisting
using caller().
Using named parameters for these is overdue. Passing the session in a
parameter instead of passing username and IP separately will later allow
storing other session info, like username or part of the email.
Note that these functions are not part of the exported API,
and the prototype change will catch (most) skew, so I am not changing
API versions. Any third-party plugins that call them will need updated
though.
The bug here was that disabling a plugin included thru goodstuff, like
htmlscrubber, caused it to be added to disable_plugins, and those plugins
were never loaded, so could not be re-enabled. Fix by allowing them to be
force loaded when appropriate. (Also that allows disabled plugins to still
record their setup options when dumping a setup file.)
The linktype check was being done on the relativised link target,
but %typedlinks uses the same link targets as %links, so that didn't work.
I think the bug only appeared when tagbase was not set.
This bugfix also let me factor out the common typedlink checking code.
To match calendars, which use local time. Particularly important at
the end of the month.
I checked the history, and there seemed no good rationalle for the
pagespecs to use gmtime.
Problem is that by the time rendering calls render_dependent, %pagesources
has had deleted files removed from it. So match_comment's lookup of
files in there to see if they had the _comment extension failed.
I had to introduce a hash that temporarily holds filenames of deleted pages
to fix this.
Note that unlike comment(), internal() had avoided this pitfall by being
defined to match both internal and non-internal pages.
So RecentChanges shows on the action bar there,
convert recentchanges to use new pageactions hook,
with compatability code to avoid breaking old templates.
Turns out that users with a modified page.tmpl need to modify it on
upgrade, at least to add the FORCEBASEURL (so edit preview works),
so there is no point in trying to retain compatability.
* Removed misc.tmpl. Now to theme ikiwiki, you only need to customise
a single template, page.tmpl.
* misc.tmpl will, however, still be read if a locally modified version
exists. This is to avoid forcing users to update page.tmpl right now.
* Ikiwiki can be configured to generate html5 instead of the default xhtml
1.0. The html5 output mode is experimental, not yet fully standards
compliant, and will be subject to rapid change.
That module is unused now. Long long ago, it used to be used to encode data in
the index. Checked all modules, and every module that uses it imports it.
Needed to handle the move of the .js files into ikiwiki/, but also this is
a longstanding bug.
Old pagemtime is not remembered in rebuild mode, and changing that would
need a lot of changes. So instead, loop on pagectime, which is remembered.
Change to remembering old pagesources info in rebuild mode. This seems safe
enough.
This entailed changing template_params; it no longer takes the template
filename as its first parameter.
Add template_depends to api and replace calls to template() with
template_depends() in appropriate places, where a dependency should be
added on the template.
Other plugins don't use template(), so will need further work.
Also, includes are disabled for security. Enabling includes only when using
templates from the templatedir would be nice, but would add a lot of
complexity to the implementation.
Avoid adding the page matched against as an influence for
currently failing pagespec matches, while still adding
any other influences.
This avoids bloating depends_simple with lots of bogus influences when
matching eg, "!link(done)". It's only necessary for the page being tested
to be an influence of that if the page matches.
With this change, the <span> with class createlink is always created
around the link text, even when no CGI URL is defined. This allows
styling of these 'links' in this case too. The same class is used as when
CGI URL is defined so that e.g. clones of the same ikiwiki, one with CGI
and one without, display in the same way (modulo the missing question mark
link).
(cherry picked from commit 290d1b498f00f63e6d41218ddb76d87e68ed5081)
Many calls to file_prune were incorrectly calling it with 2 parameters.
In cases where the filename being checked is relative to the srcdir,
that is not needed.
Made absolute filenames be pruned. (This won't work for the 2 parameter call
style.)
Made add_autofile take a generator function, and just register the
autofile, for later possible creation. The testing is moved into Render,
which allows cleaning up some stuff.
* Automatically run --gettime the first time ikiwiki is run on
a given srcdir.
* Optimise --gettime for git, so it's appropriatly screamingly
fast. (This could be done for other backends too.)
* However, --gettime for git no longer follows renames.
* Use above to fix up timestamps on docwiki, as well as ensure that
timestamps on basewiki files shipped in the deb are sane.
* Rename --getctime to --gettime. (The old name still works for
backwards compatability.)
* --gettime now also looks up last modification time.
* Add rcs_getmtime to plugin API; currently only implemented
for git.
This can be a lot faster, since huge numbers of pages are not sorted
only to mostly be thrown away. It sped up a build of my blog by at least
5 minutes.
Both markdown and tidy add paragraph tags around text, that needs to be
stripped when the text is a short, one line fragment that is being inserted
into a larger page. tidy also adds several newlines to the end, and this
broke removal of the paragraph tags.
The reason to do this is basically a user interaction design decision.
It is achieved by adding an entry, associated to the creating plugin, to
%pagestate. To find out if files were deleted a new global hash %del_hash is
%introduced.
add_autofile has to have checks, whether to create the file, anyway, so this
will make things more consistent.
Correcter check for the result of verify_src_file().
Cosmetic rename of a variable $addfile to $autofile.
pagespec_translate may set $@ if it fails to parse a pagespec, but
due to memoization, this is not reliable. If a memoized call is repeated,
and $@ is already set for some other reason previously, it will remain
set through the call to pagespec_translate.
Instead, just check if pagespec_translate returns undef.
Finally removed the last hardcoding of IkiWiki::Setup::Standard.
Take the first "IkiWiki::Setup::*" in the setup file to define the
setuptype, and remember that type to use in dumping later. (But it can be
overridden using --set, etc.)
Also, support setup file types that are not evaled.
As I was adding ngettext support, I realized I could optimize the gettext
functions by memoizing the creation of the gettext object. Note that
the object creation is still deferred until a gettext function is called,
to avoid unnecessary startup penalties on code paths that do not need
gettext.
A side benefit is that separate stub functions are no longer needed to
handle the C language case.
The objective is to provide a sensible way to let plugins add files during the
"scan stage" of the build.
Currently does a little verification and adds the file to the global array
@add_autofiles.
bestlink was looking at whether %links existed for a page in order to tell
if the page exists, but just-deleted pages still have entries in there (for
reasons it may be best not to explore). So bestlink would return
just-deleted pages. Instead, make bestlink use %pagesources.
Also, when finding a deleted page, %pagecase was not cleared of that page.
This, again, made bestlink return just-deleted pages. Now that is cleared.
Fixing bestlink exposed another issue though. The backlink calculation code
uses bestlink. So when a page was deleted, no backlinks to it are found,
and pages that really did backlink to it were not updated, and had broken
links.
To fix that, the code that actually removes deleted pages had to be split
out from find_del_files, so it can run a bit later. It is run just after
backlinks are calculated. This way, backlink calculation still sees the
deleted pages, but everything afterwards does not.
However, it does not address the original bug report that started this
whole thing, [[bugs/bestlink_returns_deleted_pages]]. Because there
bestlink is run in the needsbuild hook. And that happens before backlink
calculation, and so bestlink still returns deleted pages then. Also in the
scan hook.
If bestlink needs to work consistently during those hooks, a more involved
fix will be needed.
This avoids unnecessary influences being recorded from pagespecs
such as "link(done) and bugs/*", when a page cannot ever possibly
match.
A pagespec term that returns a value without influence is an influence
blocker. If such a blocker has a false value (possibly due to being
negated) and is ANDed with another term, it blocks that term's influence
from propigating out.
If the term is ORed, or has a true value, it does not block influence.
(Consider "link(done) or bugs/*" and "link(done) and !nosuchpage")
In the implementation in merge_influence, I had to be careful to never
negate $this or $other when testing if they are an influence blocker,
since negation mutates the object. Thus the slightly weird if statement.
I made match_* functions whose influences can vary depending on the page
matched set a special "" influence to indicate this.
Then add_depends can try just one page, and if static influences are found,
stop there.
Thought of a cleaner way to accumulate all influences in
pagespec_match_list, using the pagespec_match result object as an
accumulator.
(This also accumulates all influences from failed matches, rather than just
one failed match. I'm not sure if the old method was correct.)
Benchmarking refresh of a a wiki with 25 thousand pages showed
file_pruned() using most of the time. But, when refreshing, ikiwiki already
knows about nearly all the files. So we can skip calling file_pruned() for
those it knows about. While tricky to do, this sped up a refresh (that
otherwise does no work) by 10-50%.
If a pagespec fails to match, I had been throwing the influences away, but
that is not right. Consider `backlink(foo)`, where foo does not exist.
It still needs to be added as an influence, because if it is created, it
will influence the pagespec to match.
But with that fix, `link(bar)` had as influences all pages, whether they
link to bar or not. Which is not necessary, because modifiying a page to
add a link to bar will directly cause the pagespec to match.
So, in match_link (and all the match_* functions for page metadata),
only return an influence if the match succeeds.
match_backlink had been implemented as the inverse of match_link, but that
is no longer completly true. While match_link does not return an influence
on failure, match_backlink does.
match_created_before/after also return the influence on failure, this way
if created_after(foo) currently fails because foo does not exist, it will
still update the page with the pagespec if foo is created.
The hash will be used used to record a set of pages that influenced the
result of a pagespec match.
The influences are merged together when boolean and/or are encountered
in a pagespec. That means using a non-short-circuiting OR operator. And
so I use & and | when translating pagespecs, since those bitwise operators
can be overloaded. ("and" and "or" cannot, apparently).
Involved some code refactoring so that same code that detects
link changes for backlinks updating can be used for link dependency
checking. The nice thing is that link dep checking is thus
comopletly free!
When adding a contentless dependency, the pagespec also needs to be one
that does not look at any page content information.
As a first approximation of that, only allow glob-based pagespecs in
contentless dependencies. While there are probably a few other types of
pagespecs that can match contentless, this will work for most of them.
Dependency types are represented by bits in the values of the %depends
and %depends_simple hashes.
Change the dependslist array saved to the index to a depends hash.
depends_simple is also converted from an array to a hash.
Note that the depends field used to be a string, and we still
have compat code to handle upgrades from that, as well as from the arrays.
I didn't use ikiwiki-transition because I don't want ikiwiki to break if
users forget to run it; also we're going to recommend a full rebuild on
upgrade to this version to get the improved dependency handling. So
this compat code can be removed or moved to ikiwiki-transition later.
Here I was bitten by perl's aliasing of foreach variables
to the loop array contents, and match_link accidentially changed
the contents of %links.
In Jon's testcase, a tag added an absolute link, which was
made relative by the above bug, and then the link was added
again in preprocess, and turned into a duplicate.