g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/handwired/baredev/rev1/readme.md

1.3 KiB
Raw Blame History

BareDev (rev1)

PCB Prototype Build

An open-source, ABNT2-based 70% keyboard, focusing in a smaller footprint while retaining all the functions found on a TKL (Del and arrow keys doubling as the navigational cluster)

Make example for this keyboard (after setting up your build environment):

make handwired/baredev/rev1:default

Flashing example for this keyboard:

make handwired/baredev/rev1:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available