qmk_firmware/keyboards/dztech/dz65rgb/keymaps/jumper149/readme.md

25 lines
630 B
Markdown

# jumper149's DZ65RGB v2
Run commands in the root directory of this repository.
```
./bin/qmk compile && sudo dfu-programmer atmega32u4 erase && sudo dfu-programmer atmega32u4 flash ./dztech_dz65rgb_v2_jumper149.hex && sudo dfu-programmer atmega32u4 reset
```
## build
```
./bin/qmk compile
```
## flash
Use `qmk flash` or if it is broken (unknown reason) you can try this workaround.
I personally had some problems on ArchLinux, that I didn't debug any further though.
```
sudo dfu-programmer atmega32u4 erase
sudo dfu-programmer atmega32u4 flash ./dztech_dz65rgb_v2_jumper149.hex
sudo dfu-programmer atmega32u4 reset
```