39 lines
1.8 KiB
Markdown
39 lines
1.8 KiB
Markdown
# Mode Eighty V1 PCB QMK firmware
|
|
|
|
\
|
|
[Image Gallery](https://imgur.com/t/mechanicalkeyboards/8Uf6c2m?nc=1)
|
|
|
|
The Mode80 is a tenkeyless high-end keyboard sold by [Mode Designs](https://shop.modedesigns.com/).
|
|
|
|
* Keyboard Maintainer: [Gondolindrim](https://github.com/gondolindrim)
|
|
* Hardware Supported: proprietary PCB using STM32F072 controller
|
|
* Hardware Availability: the Mode Eighty V1 was discontinued in 2021 in favour of its second revisions. You can still buy hardware (PCBs and plates) at the Mode Designs website.
|
|
|
|
## How to flash
|
|
|
|
### Enter bootloader
|
|
|
|
The DFU state in the bootloader can be accessed in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds
|
|
* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout)
|
|
|
|
## Compile firmware
|
|
|
|
After accessing the DFU state in your PCB, build the default layout using:
|
|
|
|
make mode/m80v1/m80h:default # Hotswap
|
|
make mode/m80v1/m80s:default # Soldered
|
|
|
|
Then download the resulting binary `*bin` file using `dfu-util` or QMK Toolbox.
|
|
|
|
## Compile and flash
|
|
|
|
After accessing the DFU state in your PCB, you can compile-and-flash automatically usind `dfu-util` through
|
|
|
|
make mode/m80v1/m80h:default:flash # Hotswap
|
|
make mode/m80v1/m80s:default:flash # Soldered
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|