g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/mechlovin/zed65/rev1/readme.md

1.2 KiB
Raw Blame History

zed65

Zed65

A 65% PCB with centered USB and JST-SH support, using APM32F103.

Make example for this keyboard (after setting up your build environment):

make mechlovin/zed65/rev1

Flashing example for this keyboard:

make mechlovin/zed65/rev1:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 4 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Bootloader reset: Hold down the key at (0,13) in the matrix (usually the Back Space) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available