qmk_firmware/keyboards/mechlovin/hex4b/rev2/readme.md

28 lines
1.2 KiB
Markdown

# hex4b
![hex4b](https://i.imgur.com/lArfGgHh.jpeg)
A PCB for HEX.4B 75% keyboard.
* Keyboard Maintainer: [Mechlovin' Studio](https://github.com/mechlovin)
* Hardware Supported: Hex.4B Rev.2 PCB, APM32F103CBT6
* Hardware Availability: [Hex Keyboard](https://hexkeyboards.com/)
Make example for this keyboard (after setting up your build environment):
make mechlovin/hex4b/rev2:default
Flashing example for this keyboard:
make mechlovin/hex4b/rev2:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Bootloader reset**: Hold down the key at (0,13) in the matrix (Backspace) and plug in the keyboard
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
* **Hardware reset**: Press reset button (located on the top side of the PCB)