29 lines
1.2 KiB
Markdown
29 lines
1.2 KiB
Markdown
# Duet Switch Tester
|
|
|
|
|
|
|
|
A switch tester intended for event/storefront use
|
|
|
|
* Keyboard Maintainer: [ai03](https://github.com/ai03-2725)
|
|
* Hardware Supported: The [Duet PCB](https://github.com/ai03-2725/duet-switch-tester/tree/main/Duet-MainPCB), powered by the RP2040
|
|
* Hardware Availability: [Open-source](https://github.com/ai03-2725/duet-switch-tester)
|
|
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make ai03/duet:default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make ai03/duet:default:flash
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
|
* **Physical reset button**: Press the reset button on the back of the PCB while holding the Bootmode switch
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|