486 lines
11 KiB
Markdown
486 lines
11 KiB
Markdown
# QMK CLI Commands
|
|
|
|
# User Commands
|
|
|
|
## `qmk compile`
|
|
|
|
This command allows you to compile firmware from any directory. You can compile JSON exports from <https://config.qmk.fm>, compile keymaps in the repo, or compile the keyboard in the current working directory.
|
|
|
|
This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
|
|
|
|
**Usage for Configurator Exports**:
|
|
|
|
```
|
|
qmk compile [-c] <configuratorExport.json>
|
|
```
|
|
|
|
**Usage for Keymaps**:
|
|
|
|
```
|
|
qmk compile [-c] [-e <var>=<value>] [-j <num_jobs>] -kb <keyboard_name> -km <keymap_name>
|
|
```
|
|
|
|
**Usage in Keyboard Directory**:
|
|
|
|
Must be in keyboard directory with a default keymap, or in keymap directory for keyboard, or supply one with `--keymap <keymap_name>`
|
|
```
|
|
qmk compile
|
|
```
|
|
|
|
**Usage for building all keyboards that support a specific keymap**:
|
|
|
|
```
|
|
qmk compile -kb all -km <keymap_name>
|
|
```
|
|
|
|
**Example**:
|
|
```
|
|
$ qmk config compile.keymap=default
|
|
$ cd ~/qmk_firmware/keyboards/planck/rev6
|
|
$ qmk compile
|
|
Ψ Compiling keymap with make planck/rev6:default
|
|
...
|
|
```
|
|
or with optional keymap argument
|
|
|
|
```
|
|
$ cd ~/qmk_firmware/keyboards/clueboard/66/rev4
|
|
$ qmk compile -km 66_iso
|
|
Ψ Compiling keymap with make clueboard/66/rev4:66_iso
|
|
...
|
|
```
|
|
or in keymap directory
|
|
|
|
```
|
|
$ cd ~/qmk_firmware/keyboards/gh60/satan/keymaps/colemak
|
|
$ qmk compile
|
|
Ψ Compiling keymap with make make gh60/satan:colemak
|
|
...
|
|
```
|
|
|
|
**Usage in Layout Directory**:
|
|
|
|
Must be under `qmk_firmware/layouts/`, and in a keymap folder.
|
|
```
|
|
qmk compile -kb <keyboard_name>
|
|
```
|
|
|
|
**Example**:
|
|
```
|
|
$ cd ~/qmk_firmware/layouts/community/60_ansi/mechmerlin-ansi
|
|
$ qmk compile -kb dz60
|
|
Ψ Compiling keymap with make dz60:mechmerlin-ansi
|
|
...
|
|
```
|
|
|
|
**Parallel Compilation**:
|
|
|
|
It is possible to speed up compilation by adding the `-j`/`--parallel` flag.
|
|
```
|
|
qmk compile -j <num_jobs> -kb <keyboard_name>
|
|
```
|
|
The `num_jobs` argument determines the maximum number of jobs that can be used. Setting it to zero will enable parallel compilation without limiting the maximum number of jobs.
|
|
```
|
|
qmk compile -j 0 -kb <keyboard_name>
|
|
```
|
|
|
|
## `qmk flash`
|
|
|
|
This command is similar to `qmk compile`, but can also target a bootloader. The bootloader is optional, and is set to `:flash` by default. To specify a different bootloader, use `-bl <bootloader>`. Visit the [Flashing Firmware](flashing.md) guide for more details of the available bootloaders.
|
|
|
|
This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
|
|
|
|
**Usage for Configurator Exports**:
|
|
|
|
```
|
|
qmk flash [-bl <bootloader>] [-c] [-e <var>=<value>] [-j <num_jobs>] <configuratorExport.json>
|
|
```
|
|
|
|
**Usage for Keymaps**:
|
|
|
|
```
|
|
qmk flash -kb <keyboard_name> -km <keymap_name> [-bl <bootloader>] [-c] [-e <var>=<value>] [-j <num_jobs>]
|
|
```
|
|
|
|
**Listing the Bootloaders**
|
|
|
|
```
|
|
qmk flash -b
|
|
```
|
|
|
|
## `qmk config`
|
|
|
|
This command lets you configure the behavior of QMK. For the full `qmk config` documentation see [CLI Configuration](cli_configuration.md).
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN]
|
|
```
|
|
|
|
## `qmk cd`
|
|
|
|
This command opens a new shell in your `qmk_firmware` directory.
|
|
|
|
Note that if you are already somewhere within `QMK_HOME` (for example, the `keyboards/` folder), nothing will happen.
|
|
|
|
To exit out into the parent shell, simply type `exit`.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk cd
|
|
```
|
|
|
|
## `qmk console`
|
|
|
|
This command lets you connect to keyboard consoles to get debugging messages. It only works if your keyboard firmware has been compiled with `CONSOLE_ENABLE=yes`.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk console [-d <pid>:<vid>[:<index>]] [-l] [-n] [-t] [-w <seconds>]
|
|
```
|
|
|
|
**Examples**:
|
|
|
|
Connect to all available keyboards and show their console messages:
|
|
|
|
```
|
|
qmk console
|
|
```
|
|
|
|
List all devices:
|
|
|
|
```
|
|
qmk console -l
|
|
```
|
|
|
|
Show only messages from clueboard/66/rev3 keyboards:
|
|
|
|
```
|
|
qmk console -d C1ED:2370
|
|
```
|
|
|
|
Show only messages from the second clueboard/66/rev3:
|
|
|
|
```
|
|
qmk console -d C1ED:2370:2
|
|
```
|
|
|
|
Show timestamps and VID:PID instead of names:
|
|
|
|
```
|
|
qmk console -n -t
|
|
```
|
|
|
|
Disable bootloader messages:
|
|
|
|
```
|
|
qmk console --no-bootloaders
|
|
```
|
|
|
|
## `qmk doctor`
|
|
|
|
This command examines your environment and alerts you to potential build or flash problems. It can fix many of them if you want it to.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk doctor [-y] [-n]
|
|
```
|
|
|
|
**Examples**:
|
|
|
|
Check your environment for problems and prompt to fix them:
|
|
|
|
qmk doctor
|
|
|
|
Check your environment and automatically fix any problems found:
|
|
|
|
qmk doctor -y
|
|
|
|
Check your environment and report problems only:
|
|
|
|
qmk doctor -n
|
|
|
|
## `qmk format-json`
|
|
|
|
Formats a JSON file in a (mostly) human-friendly way. Will usually correctly detect the format of the JSON (info.json or keymap.json) but you can override this with `--format` if neccesary.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk format-json [-f FORMAT] <json_file>
|
|
```
|
|
|
|
## `qmk info`
|
|
|
|
Displays information about keyboards and keymaps in QMK. You can use this to get information about a keyboard, show the layouts, display the underlying key matrix, or to pretty-print JSON keymaps.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk info [-f FORMAT] [-m] [-l] [-km KEYMAP] [-kb KEYBOARD]
|
|
```
|
|
|
|
This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
|
|
|
|
**Examples**:
|
|
|
|
Show basic information for a keyboard:
|
|
|
|
qmk info -kb planck/rev5
|
|
|
|
Show the matrix for a keyboard:
|
|
|
|
qmk info -kb ergodox_ez -m
|
|
|
|
Show a JSON keymap for a keyboard:
|
|
|
|
qmk info -kb clueboard/california -km default
|
|
|
|
## `qmk json2c`
|
|
|
|
Creates a keymap.c from a QMK Configurator export.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk json2c [-o OUTPUT] filename
|
|
```
|
|
|
|
## `qmk c2json`
|
|
|
|
Creates a keymap.json from a keymap.c.
|
|
**Note:** Parsing C source files is not easy, therefore this subcommand may not work with your keymap. In some cases not using the C pre-processor helps.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk c2json -km KEYMAP -kb KEYBOARD [-q] [--no-cpp] [-o OUTPUT] filename
|
|
```
|
|
|
|
## `qmk lint`
|
|
|
|
Checks over a keyboard and/or keymap and highlights common errors, problems, and anti-patterns.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk lint [-km KEYMAP] [-kb KEYBOARD] [--strict]
|
|
```
|
|
|
|
This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
|
|
|
|
**Examples**:
|
|
|
|
Do a basic lint check:
|
|
|
|
qmk lint -kb rominronin/katana60/rev2
|
|
|
|
## `qmk list-keyboards`
|
|
|
|
This command lists all the keyboards currently defined in `qmk_firmware`
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk list-keyboards
|
|
```
|
|
|
|
## `qmk list-keymaps`
|
|
|
|
This command lists all the keymaps for a specified keyboard (and revision).
|
|
|
|
This command is directory aware. It will automatically fill in KEYBOARD if you are in a keyboard directory.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk list-keymaps -kb planck/ez
|
|
```
|
|
|
|
## `qmk new-keyboard`
|
|
|
|
This command creates a new keyboard based on available templates.
|
|
|
|
Any arguments that are not provided will prompt for input. If `-u` is not passed and `user.name` is set in .gitconfig, it will be used as the default username in the prompt.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk new-keyboard [-kb KEYBOARD] [-t {avr,ps2avrgb}] -u USERNAME
|
|
```
|
|
|
|
## `qmk new-keymap`
|
|
|
|
This command creates a new keymap based on a keyboard's existing default keymap.
|
|
|
|
This command is directory aware. It will automatically fill in KEYBOARD and/or KEYMAP if you are in a keyboard or keymap directory.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk new-keymap [-kb KEYBOARD] [-km KEYMAP]
|
|
```
|
|
|
|
## `qmk clean`
|
|
|
|
This command cleans up the `.build` folder. If `--all` is passed, any .hex or .bin files present in the `qmk_firmware` directory will also be deleted.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk clean [-a]
|
|
```
|
|
|
|
---
|
|
|
|
# Developer Commands
|
|
|
|
## `qmk format-text`
|
|
|
|
This command formats text files to have proper line endings.
|
|
|
|
Every text file in the repository needs to have Unix (LF) line ending.
|
|
If you are working on **Windows**, you must ensure that line endings are corrected in order to get your PRs merged.
|
|
|
|
```
|
|
qmk format-text
|
|
```
|
|
|
|
## `qmk format-c`
|
|
|
|
This command formats C code using clang-format.
|
|
|
|
Run it with no arguments to format all core code that has been changed. Default checks `origin/master` with `git diff`, branch can be changed using `-b <branch_name>`
|
|
|
|
Run it with `-a` to format all core code, or pass filenames on the command line to run it on specific files.
|
|
|
|
**Usage for specified files**:
|
|
|
|
```
|
|
qmk format-c [file1] [file2] [...] [fileN]
|
|
```
|
|
|
|
**Usage for all core files**:
|
|
|
|
```
|
|
qmk format-c -a
|
|
```
|
|
|
|
**Usage for only changed files against origin/master**:
|
|
|
|
```
|
|
qmk format-c
|
|
```
|
|
|
|
**Usage for only changed files against branch_name**:
|
|
|
|
```
|
|
qmk format-c -b branch_name
|
|
```
|
|
|
|
## `qmk generate-compilation-database`
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk generate-compilation-database [-kb KEYBOARD] [-km KEYMAP]
|
|
```
|
|
|
|
Creates a `compile_commands.json` file.
|
|
|
|
Does your IDE/editor use a language server but doesn't _quite_ find all the necessary include files? Do you hate red squigglies? Do you wish your editor could figure out `#include QMK_KEYBOARD_H`? You might need a [compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html)! The qmk tool can build this for you.
|
|
|
|
This command needs to know which keyboard and keymap to build. It uses the same configuration options as the `qmk compile` command: arguments, current directory, and config files.
|
|
|
|
**Example:**
|
|
|
|
```
|
|
$ cd ~/qmk_firmware/keyboards/gh60/satan/keymaps/colemak
|
|
$ qmk generate-compilation-database
|
|
Ψ Making clean
|
|
Ψ Gathering build instructions from make -n gh60/satan:colemak
|
|
Ψ Found 50 compile commands
|
|
Ψ Writing build database to /Users/you/src/qmk_firmware/compile_commands.json
|
|
```
|
|
|
|
Now open your dev environment and live a squiggly-free life.
|
|
|
|
## `qmk docs`
|
|
|
|
This command starts a local HTTP server which you can use for browsing or improving the docs. Default port is 8936.
|
|
Use the `-b`/`--browser` flag to automatically open the local webserver in your default browser.
|
|
|
|
This command runs `docsify serve` if `docsify-cli` is installed (which provides live reload), otherwise Python's builtin HTTP server module will be used.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk docs [-b] [-p PORT]
|
|
```
|
|
|
|
## `qmk generate-docs`
|
|
|
|
This command allows you to generate QMK documentation locally. It can be uses for general browsing or improving the docs. External tools such as [serve](https://www.npmjs.com/package/serve) can be used to browse the generated files.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk generate-docs
|
|
```
|
|
|
|
## `qmk generate-rgb-breathe-table`
|
|
|
|
This command generates a lookup table (LUT) header file for the [RGB Lighting](feature_rgblight.md) feature's breathing animation. Place this file in your keyboard or keymap directory as `rgblight_breathe_table.h` to override the default LUT in `quantum/rgblight/`.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk generate-rgb-breathe-table [-q] [-o OUTPUT] [-m MAX] [-c CENTER]
|
|
```
|
|
|
|
## `qmk kle2json`
|
|
|
|
This command allows you to convert from raw KLE data to QMK Configurator JSON. It accepts either an absolute file path, or a file name in the current directory. By default it will not overwrite `info.json` if it is already present. Use the `-f` or `--force` flag to overwrite.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk kle2json [-f] <filename>
|
|
```
|
|
|
|
**Examples**:
|
|
|
|
```
|
|
$ qmk kle2json kle.txt
|
|
☒ File info.json already exists, use -f or --force to overwrite.
|
|
```
|
|
|
|
```
|
|
$ qmk kle2json -f kle.txt -f
|
|
Ψ Wrote out to info.json
|
|
```
|
|
|
|
## `qmk format-python`
|
|
|
|
This command formats python code in `qmk_firmware`.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk format-python
|
|
```
|
|
|
|
## `qmk pytest`
|
|
|
|
This command runs the python test suite. If you make changes to python code you should ensure this runs successfully.
|
|
|
|
**Usage**:
|
|
|
|
```
|
|
qmk pytest
|
|
```
|