qmk_firmware/keyboards/tmo50/keymaps/default/readme.md

45 lines
991 B
Markdown
Raw Blame History

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# Additional info
## Matrix
You probably tried or will try to configure the keymapping to your liking. To make it easier configuring your layouts, photo of keyboards matrix will help.
![TMO50 matrix](https://i.imgur.com/ud7RB8d.png)
## Pinout
Most of the pinout can be found in *config.h* but there's here's a table of all the used pins for TMO50 (including indicator LED pins)
| Pin | Assigned to |
|---|---|
| D5 | Row 0 |
| D3 | Row 1 |
| D2 | Row 2 |
| D0 | Row 3 |
| | |
| D1 | Col 0 |
| D4 | Col 1 |
| F0 | Col 2 |
| F1 | Col 3 |
| F4 | Col 4 |
| F5 | Col 5 |
| F6 | Col 6 |
| F7 | Col 7 |
| D6 | Col 8 |
| D7 | Col 9 |
| B4 | Col 10 |
| B5 | Col 11 |
| B6 | Col 12 |
| C6 | Col 13 |
| | |
| B7 | Backlight |
| C7 | RGB LEDs |
| B0 | LED 4 (L4) |
| B1 | LED 3 (L3) |
| B2 | LED 2 (L2) |
| B3 | LED 1 (L1) |
## Indicator LEDs
Their size is 2×3×4mm. The THT hole without a circle on the pcb is VCC(+) and the other one is connect to their corresponding pin.