1.2 KiB
1.2 KiB
Gondolindrim X Dark Magnum Ergo 1 PCB QMK firmware
The Magnum Ergo 1 is an Alice-layout ergonomic keyboard designed by Dark, with a PCB designer by Gondolindrim.
- Keyboard Maintainer: Gondolindrim
- Hardware Supported: proprietary PCB using STM32F4x1C microcontroller;
- Availability: as of november 2022 both keyboard and PCB were sold in a private Group Buy; therefore availability is limited.
How to flash
Enter bootloader
The DFU state in the bootloader can be accessed in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key, grave accent in the default keymap) and plug in the keyboard;
- Physical reset button: press the button on the front of the PCB, next to caps lock, for at least five seconds;
- Keycode in layout: Press the key mapped to
QK_BOOT; in the default layout, that is top left key ('grave') in layer 1.
How to compile and flash
You can compile the Iron 165R2 default keymap by using the following:
make magnum_ergo_1:default
And use dfu-util in the command line or through a GUI like QMK toolbox to upload the firmware to the PCB. To directly flash the PCB after it is put into a DFU state, use:
make magnum_ergo_1:default:flash