qmk_firmware/keyboards/keycapsss/3w6_2040/readme.md

30 lines
1.4 KiB
Markdown

# 3w6_2040
![image](https://i.imgur.com/QAL63nyh.jpg)
A split keyboard with 3x5 vertically staggered keys and 3 thumb keys, with support for pimoroni trackball modules on each half.
This version is distinct from keyboards/3w6 and is exclusive to [keycapsss.com](https://keycapsss.com).
* Keyboard Maintainer: [@keyboard-magpie]
* Hardware Supported: On board rp2040 microcontrollers.
* Hardware Availability: [keycapsss.com](https://keycapsss.com)
Make firmware .uf2 for this keyboard (after setting up your build environment):
qmk compile -kb keycapsss/3w6_2040 -km default
Example of flashing this keyboard:
qmk flash -kb keycapsss/3w6_2040 -km default (or drag and drop the uf2 from the above command into the mass storage device that appears when in bootloader mode)
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Press and hold the button on the front of the PCB when plugging in.
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available