g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/zykrah/slime88/readme.md

1.1 KiB
Raw Blame History

Slime88

Slime88

A Hotswap Multi-layout F13 TKL PCB (h88c compatible) powered by RP2040.

  • Keyboard Maintainer: Zykrah
  • Hardware Supported: Slime88 rev1 PCB
  • Hardware Availability: SLIME88

Make example for this keyboard (after setting up your build environment):

make zykrah/slime88:default

Flashing example for this keyboard:

make zykrah/slime88:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly short the RST and GND pads on the SWD header twice, or short the BOOT header and plug in keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available