g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/laneware/raindrop/readme.md

1.6 KiB
Raw Permalink Blame History

Raindrop

stacked
Casing
PCB Front
PCB Front

60% sized keyboard with a gasket mounted plate and aluminium case, made by Laneware Peripherals.

  • Keyboard Maintainer: Laneware Peripherals
  • Hardware Supported: Raindrop PCB
  • Hardware Availability: Group Buy

Layouts

The Raindrop PCB can be configured in the following key layouts:

Key Layout Keymap Diagram
Standard 60% default diagram_ansi
2u Left Shift with Arrow Keys arrows diagram_arrows
HHKB with 6.25 Spacebar hhkb diagram_hhkb

Make example for this keyboard (after setting up your build environment):

make laneware/raindrop:default

Flashing example for this keyboard:

make laneware/raindrop:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available