35 lines
1.4 KiB
Markdown
35 lines
1.4 KiB
Markdown
# FOX × iNETT Studio SQUARE 80%
|
||
|
||
|
||
|
||
_A TKL keyboard from the iNETT Studio's SQUARE series._
|
||
|
||
- Keyboard Maintainer: [Wraul](https://github.com/Wraul)
|
||
- Hardware Supported: The QMK compatible hot swappable PCB offered during the GB
|
||
- Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=100769.0)
|
||
|
||
Make example for this keyboard (after setting up your build environment):
|
||
|
||
make inett_studio/sq80:default
|
||
|
||
Flashing example for this keyboard:
|
||
|
||
make inett_studio/sq80:default:flash
|
||
|
||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||
|
||
## Bootloader
|
||
|
||
The PCB is delivered with a forked version of QMK.
|
||
At this moment it is not apparent if the stock firmware comes with a keybinding for entering the bootloader.
|
||
|
||
Enter the bootloader with the stock firmware:
|
||
|
||
- **Physical reset button**: Briefly press the button on the back of the PCB
|
||
|
||
After flashing it is possible to enter the bootloader in 3 ways:
|
||
|
||
- **Bootmagic reset**: Hold down the escape key and plug in the keyboard
|
||
- **Physical reset button**: Briefly press the button on the back of the PCB
|
||
- **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|