30 lines
1.5 KiB
Markdown
30 lines
1.5 KiB
Markdown
# modelm101_teensy2
|
|
|
|
|
|
|
|
This is based on the modelm101 teensypp keyboard by iw0rm3r. The difference is that Teensy 2.0 board (produced by PJRC) is used instead of the Teensy++ 2.0 due to the availability issues. Only CapsLock LED is supported since Teensy 2.0 only has 25 digital I/0 pins.
|
|
|
|
Configuration is build for the Atmel ATmega32U4 controller, which you can easily use on the Teensy 2.0 board (produced by PJRC).
|
|
|
|
Pins of the Teensy board you should use by default:
|
|
```
|
|
Columns: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
|
|
Pins: F0 F1 F4 F5 F6 F7 B6 B5 B4 D7 D6 B0 B1 B2 B3 B7
|
|
--------------------------------------------------------
|
|
Rows: 1 2 3 4 5 6 7 8
|
|
Pins: D0 D1 D2 D3 C6 C7 D5 D4
|
|
--------------------------------------------------------
|
|
Status LEDs: CapsLock +5V ScrollLock NumLock
|
|
Pins: E6 5V - -
|
|
```
|
|
|
|
Keyboard Maintainer: [wangfuco](https://github.com/wangfuco)
|
|
Hardware Supported: Teensy 2.0 board by PJRC
|
|
Hardware Availability: https://www.pjrc.com/store/teensy.html
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make ibm/model_m/teensy2:default:teensy
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|