g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/handwired/ziyoulang_k3_mod/readme.md

1.4 KiB
Raw Permalink Blame History

ziyoulang_k3_mod

ziyoulang_k3_mod

This base keyboard has SX83099 IC causes some problems. I needed QMK as an alternative, especially since the controller freezes when the backlight is off.

Make example for this keyboard (after setting up your build environment):

make handwired/ziyoulang_k3_mod:default

Flashing example for this keyboard:

make handwired/ziyoulang_k3_mod:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Requires hand wired

KiCAD wiring diagram

explanation

Bootloader

Enter the bootloader in 2 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Keycode in layout: Press the key mapped to QK_BOOT if it is available