27 lines
1.0 KiB
Markdown
27 lines
1.0 KiB
Markdown
# DZ60 60% Mechanical Keyboard PCB
|
|
|
|
## A Customizable 60% Mechanical Keyboard PCB
|
|
|
|
* Keyboard Maintainer: QMK Community
|
|
* Hardware Supported: DZ60 60% Mechanical Keyboard PCB
|
|
* Hardware Availability: [KBDfans](https://kbdfans.com/collections/60/products/dz60-60-pcb)
|
|
|
|
There are two versions of the DZ60 PCB. Please use the appropriate firmware for your board.
|
|
|
|
* V1: 1.6mm thickness PCB;
|
|
* V2: 1.2mm thickness PCB
|
|
|
|
## Bootloader
|
|
|
|
Enter the bootloader in 3 ways:
|
|
|
|
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix
|
|
* **Physical reset button**: Briefly press the button on the back of the PCB
|
|
* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make dztech/dz60v2:default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|