qmk_firmware/keyboards/acheron/keebspcb/readme.md

34 lines
1.9 KiB
Markdown
Raw Permalink Blame History

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# Acheron Aχξρων 60-SM-S-STM32-MX-HS-WI (codename "KeebsPCB") QMK firmware
<p align="center">
<img align="middle" src="https://raw.githubusercontent.com/Gondolindrim/acheronLibrary/master/graphics/acheronLong.png" width="400">
</p>
## Introduction
This is the QMK firmware repository for the KeebsPCB, updated until [pre-revision Alpha](https://github.com/Gondolindrim/KeebsPCB/releases/tag/pre-Alpha).
The KeebsPCB is an Open-Hardware guidelines compliant PCB which files can be found at [this link](https://github.com/Gondolindrim/KeebsPCB). Its designer and maintainer is [Gondolindrim](https://github.com/Gondolindrim).
The KeebsPCB is a collaboration between Gondolindrim and MrKeebs; its layouts and features were cherry-picked by MrKeebs and the PCB was designed for him with these chosen features.
As of may 2020, there is no way to buy an KeebsPCB through a vendor or Group Buy; the only possible way is ordering them directly from a manufacturer.
## Layouts
The PCB offers a single layout consisting of a default ANSI layout with 7U bottom row.
## PCB Documentation
See the [AcheronDocs](https://gondolindrim.github.io/AcheronDocs/keebs/intro.html) page for the KeebsPCB full documentation. You can also check the KiCad PCB files at the [KeebsPCB GitHub repository](https://github.com/Gondolindrim/KeebsPCB).
Before using the files for personal or commercial use, please read the [Acheron Open-Hardware License V1.2](https://gondolindrim.github.io/AcheronDocs/license/license.html) under which the Austin PCB is published.
## How to compile
After setting up your build environment, you can compile the KeebsPCB default keymap by using:
make acheron/keebspcb:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).