Commit Graph

145 Commits (f7f775a4efc39a3fc421ddee95b1d78ff26396be)

Author SHA1 Message Date
Ryan ac5e6b6a3b
Tentative Teensy 3.5 support (#14420)
* Tentative Teensy 3.5 support

* Set firmware format to .hex for ARM Teensys

* Got to "device descriptor failed" by comparing with Teensy 3.6 code

* Drop down to 96MHz...

* Bump back up to 120MHz
2022-07-03 00:12:45 +10:00
Ryan 3ecb0a80af
Feature-ify Send String (#17275) 2022-07-02 22:10:08 +10:00
Nick Brassel 5846b40f74
RP2040 emulated EEPROM. (#17519) 2022-07-02 15:18:50 +10:00
Stefan Kerkmann d717396708
[Core] Add Raspberry Pi RP2040 support (#14877)
* Disable RESET keycode because of naming conflicts

* Add Pico SDK as submodule

* Add RP2040 build support to QMK

* Adjust USB endpoint structs for RP2040

* Add RP2040 bootloader and double-tap reset routine

* Add generic and pro micro RP2040 boards

* Add RP2040 onekey keyboard

* Add WS2812 PIO DMA enabled driver and documentation

Supports regular and open-drain output configuration. RP2040 GPIOs are
sadly not 5V tolerant, so this is a bit use-less or needs extra hardware
or you take the risk to fry your hardware.

* Adjust SIO Driver for RP2040

* Adjust I2C Driver for RP2040

* Adjust SPI Driver for RP2040

* Add PIO serial driver and documentation

* Add general RP2040 documentation

* Apply suggestions from code review

Co-authored-by: Nick Brassel <nick@tzarc.org>

Co-authored-by: Nick Brassel <nick@tzarc.org>
2022-06-30 13:19:27 +02:00
Nick Brassel 34e244cecf
Wear-leveling EEPROM drivers: `embedded_flash`, `spi_flash`, `legacy` (#17376) 2022-06-30 07:42:23 +10:00
Nick Brassel 01ecf332ff
Generic wear-leveling algorithm (#16996)
* Initial import of wear-leveling algorithm.

* Alignment.

* Docs tweaks.

* Lock/unlock.

* Update quantum/wear_leveling/wear_leveling_internal.h

Co-authored-by: Stefan Kerkmann <karlk90@pm.me>

* More tests, fix issue with consolidation when unlocked.

* More tests.

* Review comments.

* Add plumbing for FNV1a.

* Another test checking that checksum mismatch clears the cache.

* Check that the write log still gets played back.

Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
2022-06-27 07:18:21 +10:00
precondition 7060cb7b26
Refactor steno and add `STENO_PROTOCOL = [all|txbolt|geminipr]` (#17065)
* Refactor steno into STENO_ENABLE_[ALL|GEMINI|BOLT]

* Update stenography documentation

* STENO_ENABLE_TXBOLT → STENO_ENABLE_BOLT

TXBOLT is a better name but BOLT is more consistent with the
pre-existing TX Bolt related constants, which all drop the "TX " prefix

* Comments

* STENO_ENABLE_[GEMINI|BOLT|ALL] → STENO_PROTOCOL = [geminipr|txbolt|all]

* Add note on lacking V-USB support

* Clear chord at the end of the switch(mode){send_steno_chord} block

* Return true if NOEVENT

* update_chord_xxx → add_xxx_key_to_chord

* Enable the defines for all the protocols if STENO_PROTOCOL = all

* Mention how to use `steno_set_mode`

* Set the default steno protocol to "all"

This is done so that existing keymaps invoking `steno_set_mode` don't
all suddenly break

* Add data driver equivalents for stenography feature

* Document format of serial steno packets

(Thanks dnaq)

* Add missing comma
2022-06-23 20:43:24 +02:00
Stefan Kerkmann fe680a8568
[Core] Split ChibiOS usart split driver in protocol and hardware driver part (#16669) 2022-06-18 08:04:17 +10:00
Nick Brassel fa8fb60279
Dump out the largest symbols in flash and in RAM. (#17397) 2022-06-16 09:55:15 +10:00
Jouke Witteveen 1706da9054
tap-dance: Restructure code and document in more detail (#16394) 2022-06-13 22:12:55 +02:00
Nick Brassel 1085500e89
Rework paths for eeprom locations. (#17326)
* Rework paths for eeprom locations.

* File relocation.

* Wrong file move.

* Fixup test paths.
2022-06-08 09:42:35 +10:00
Stefan Kerkmann e89478eb0f
[Core] Update C standard to GNU11, C++ to GNU++14 (#17114) 2022-06-06 08:47:22 +10:00
Nick Brassel 08c556b78b
Add keymap wrappers for introspection into the keymap. (#17229)
* Introspection handlers for keymaps.

* Renaming.
2022-06-05 10:26:02 +10:00
Nick Brassel 8545473307
Removes terminal from QMK. (#17258) 2022-05-30 22:38:08 -07:00
Joy Lee 1c7e8b9a9d
Added support for Wb32fq95 (#16871) 2022-05-23 15:57:24 +10:00
Nick Brassel 5816288926
Warn about LTO with arm_atsam, not ChibiOS. (#17106) 2022-05-16 15:29:55 +10:00
Joel Challis 608fa5154c
Data driven `g_led_config` (#16728) 2022-05-16 07:39:29 +10:00
Pascal Getreuer 68b16bba68
[Core] Add Caps Word feature to core (#16588)
Co-authored-by: precondition <57645186+precondition@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
2022-05-14 16:00:32 +10:00
QMK Bot 84ffd4f72d Merge remote-tracking branch 'origin/master' into develop 2022-05-06 12:18:51 +00:00
Ryan 8c23f87c51
Ensure .hex file output for ARM Teensys (#17014) 2022-05-06 13:18:03 +01:00
Joy Lee 25f849b397
Update wb32-dfu (#16438) 2022-04-19 21:21:12 +10:00
Joel Challis 92a61aa0cd
Implement XAP 'secure' core requirements (#16843)
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
2022-04-16 11:13:05 -07:00
Nick Brassel 1f2b1dedcc
Quantum Painter (#10174)
* Install dependencies before executing unit tests.

* Split out UTF-8 decoder.

* Fixup python formatting rules.

* Add documentation for QGF/QFF and the RLE format used.

* Add CLI commands for converting images and fonts.

* Add stub rules.mk for QP.

* Add stream type.

* Add base driver and comms interfaces.

* Add support for SPI, SPI+D/C comms drivers.

* Include <qp.h> when enabled.

* Add base support for SPI+D/C+RST panels, as well as concrete implementation of ST7789.

* Add support for GC9A01.

* Add support for ILI9341.

* Add support for ILI9163.

* Add support for SSD1351.

* Implement qp_setpixel, including pixdata buffer management.

* Implement qp_line.

* Implement qp_rect.

* Implement qp_circle.

* Implement qp_ellipse.

* Implement palette interpolation.

* Allow for streams to work with either flash or RAM.

* Image loading.

* Font loading.

* QGF palette loading.

* Progressive decoder of pixel data supporting Raw+RLE, 1-,2-,4-,8-bpp monochrome and palette-based images.

* Image drawing.

* Animations.

* Font rendering.

* Check against 256 colours, dump out the loaded palette if debugging enabled.

* Fix build.

* AVR is not the intended audience.

* `qmk format-c`

* Generation fix.

* First batch of docs.

* More docs and examples.

* Review comments.

* Public API documentation.
2022-04-13 18:00:18 +10:00
Nick Brassel ec4f655333
Add warning for CTCP/CONVERT_TO_PROTON_C. (#16782) 2022-04-03 19:17:38 +01:00
Joel Challis 1660b2d2e2
Refactor CTPC logic to allow future converters (#16621)
* Refactor CTPC logic to allow future converters

* Update builddefs/converters.mk

Co-authored-by: Stefan Kerkmann <karlk90@pm.me>

Co-authored-by: Stefan Kerkmann <karlk90@pm.me>
2022-04-03 18:22:52 +01:00
Ryan 9ee2effe8e
HD44780 driver rework (#16370) 2022-03-19 17:57:22 +11:00
QMK Bot 2749346a53 Merge remote-tracking branch 'origin/master' into develop 2022-03-16 23:45:35 +00:00
Joel Challis 417f089115
Print out generated files during build (#16672) 2022-03-17 10:45:06 +11:00
Nick Brassel 8d5eacb7dd
Add support for encoder mapping. (#13286) 2022-03-09 19:29:00 +11:00
Nick Brassel 2f6751e48a
Asymmetric encoders, encoder tests. (#16068) 2022-03-08 16:58:05 +11:00
Nick Brassel 44f1bd9b3a
ChibiOS 21.11.1 update. (#16251)
* ChibiOS 21.11.1 update.

* `uf2-tinyuf2` => `tinyuf2`

* Updated chibios-contrib, fixup preprocessor for tinyuf2 bootloader.

* Fixup keychron L433 boards.

* Makefile cleanup.

* RISC-V build fixes.

* Fixup RISC-V build.
2022-03-07 21:04:22 +11:00
Joy Lee 71c0b97bce
Added external spi flash driver. (#15419) 2022-02-11 20:26:16 +00:00
Idan Kamara 793f54f6ca
ps2/avr: use the correct file name (#16316)
This was missed in https://github.com/qmk/qmk_firmware/pull/14895.

Thanks to fauxpark for spotting this.
2022-02-11 20:36:26 +11:00
Joel Challis f7e7671f69
Migrate more makefile utilities to builddefs sub-directory (#16002) 2022-02-10 09:45:51 -08:00
Nick Brassel e987ce1652
Standardise error output. (#16220) 2022-02-04 17:32:31 -08:00
Nick Brassel 0be2eaf174
Create a build error if no bootloader is specified. (#16181)
* Create a build error if no bootloader is specified.

* Update builddefs/bootloader.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2022-02-03 19:22:49 +11:00
Nick Brassel 77062e9a36
Add L432, L442. (#16016) 2022-01-24 08:49:36 +11:00
Ryan 5fb93934d0
Fixes for bootloader refactor build failures (#15638) 2022-01-06 06:55:46 +11:00
Ryan 6bc870d899
Refactor `bootloader_jump()` implementations (#15450)
* Refactor `bootloader_jump()` implementations

* Fix tests?

* Rename `atmel-samba` to `md-boot`
2021-12-27 21:10:07 +11:00
Hugo Osvaldo Barrera 76a673233c
Add a clarification to an error message (#15207)
Makes this a bit more foolproof.

See https://github.com/qmk/qmk_firmware/issues/15202
2021-12-27 11:53:46 +11:00
Joy Lee 68838bb700
Westberrytech pr (#14422)
* Added support for WB32 MCU

* Modified eeprom_wb32.c

* Remove the eeprom_wb32-related code
2021-11-27 09:28:18 +11:00
precondition 4bac5f53d8
New feature: `DYNAMIC_TAPPING_TERM_ENABLE` (#11036)
* New feature: `DYNAMIC_TAPPING_TERM_ENABLE`

3 new quantum keys to configure the tapping term on the fly.

* Replace sprintf call in tapping_term_report by get_u16_str

* Replace tab with 4 spaces
2021-11-26 07:06:50 +11:00
Nick Brassel 36d123e9c5
Add support for deferred executors. (#14859)
* Add support for deferred executors.

* More docs.

* Include from quantum.h

* Cleanup.

* Parameter checks

* Comments.

* qmk format-c

* I accidentally a few words.

* API name change.

* Apply suggestions from code review

Co-authored-by: Sergey Vlasov <sigprof@gmail.com>

* Review comments.

* qmk format-c

* Review comments.

Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
2021-11-15 18:21:09 +00:00
Joel Challis 55fb468d74
More platform/protocol alignment (#14976) 2021-10-29 11:16:19 +01:00
Joel Challis b780c797be
Migrate makefile utilities to sub-directory (#14917) 2021-10-28 01:07:53 +01:00