Noticeable changes since the last pull request:
* The forced NKRO mode can be easily toggled off at compile-time, to
make the firmware compatible with certain operating systems.
* The `:;` key has changed behaviour: to access the `;` symbol, the key
needs to be double-tapped, instead of shifted.
* The `=` and `\` keys were swapped, `=` moved to the home row, on both
the **base** and the **experimental** layers.
* The arrow and navigation keys were redone, they are now more
accessible, but the navigation keys require an extra tap to access.
* The **Emacs** layer is gone, replaced by a simplified
**navigation and media** layer.
* `LEAD v` types the firmware version, and the keymap version.
* On the **experimental** layer, the `L` and `Q`, and the `K` and `G`
keys were swapped.
* The **Steno** layer gained a few more `#` and `*` keys, to make it
easier on my fingers.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
I haven't had a chance to update the Arch base box in a while so using the Ubuntu one is far more likely to succeed for a new user (I did test that box recently as I traded my ErgoDox EZ to a friend and needed to reprogram it for him).
Unfortunately the supported targets, like "quick", "all", "clean",
and so on has to be repeated two extra times, but this is the best
I can do with my makefile skills.
* Added WS2812 support for KC60
* Reorganized WS2812 support into its own keymap
* Fixed relative link in README
* Moved WS2812 mention in README to the bottom
* Fixed titling in WS2812 README
* Reverted KC60 Makefile and default keymap back
* Moved RGB specific config.h to ws2812 keymap folder
* Added my personal keymap
* Updated compiled hex
* Reverted KC60 files to 3f6fac47 before pull request #419
* Added WS2812 support for KC60
* Reorganized WS2812 support into its own keymap
* Fixed relative link in README
* Moved WS2812 mention in README to the bottom
* Fixed titling in WS2812 README
* Reverted KC60 Makefile and default keymap back
* Moved RGB specific config.h to ws2812 keymap folder
* More documentation
* Saving crontab for user on host
* Restructuring in keeping with recent changes to conventions
* Simplify submitting my fave cbbrowne keystroke by using SEND_STRING()
* Local change, not apropos to have in this repo
* Simplify logic; no need to return so much
* Add in a version key
* Add docs
* Split build date into a separate DEFINE
* Ensure there is a value even if not working within a git repo
* Should not include the compiled code in the repo
* compiled.hex files should not be included in the repo; they represent generated compiled code
* Fix spelling in comment
* Remove more generated files
* Add rule to ignore contents of .build directories; their contents are generated
* Revert removals of compiled files
Compared to the previous version, the following noteworthy changes have
been made to the keymap:
* The keyboard starts in NKRO mode, bootmagic and other things are
disabled.
* A STENO layer was added, to be used with Plover.
* An experimental layout was added, something halfway between Dvorak and
Capewell-Dvorak. A work in progress.
* `LEAD y` types \o/.
* Some keys on the BASE layer have been moved around:
- `?` moved to the left pinky, left of `Q`.
- `=` shifted one row down, but `F11` stayed where it was.
- `-` on the left half was replaced by `Tab`.
- `Tab`'s original position is taken by a `Media Next`/`Media Prev`
key.
- `:` now inputs `;` when shifted.
* `ESC` cancels the **HUN** layer too, not just modifiers.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
This adds the keyboard and keymap built, along with the QMK firmware's
git hash (or a timestamp), to OPT_DEFS. That, in turn, allows keymaps to
make use of these information, and do whatever they want with it. For
example, one could print them on `LEADER v` like this:
```c
SEQ_ONE_KEY (KC_V) {
SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
}
```
This addresses #366.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Don't save the ctags file in the repo.
* Initial support for the KC60 board. Only 5x5 working so far.
* Rename because this isn't the same KC60 as others.
* Add in some generic layout.
Pins seem to be in the right order except the 6th column spews
gibberish.
* Don't need this for now.
* Move this to some other folder.
* Trying again to start over.
* Don't need to start over because I figured out why the 'broken' stuff wasn't working.
* Attempt to enable backlighting. It's on on pin B7 like other boards.
* Fix last port changes and fix LED control in keymap.
* Trying some other LED code.
* Bootloader needs to be bigger. Disabling backlight for now.
* Simplify LED code while I try to figure it out.
* Turn back on backlighting.
* Backlighting works now. Just need to get levels or breathing working.
* Trying to allow for turning off the LEDs before I get to brightness levels.
* The missing link: need to run the init_ports function for LEDs to work properly.
* Removing breathing stuff since it bricks the board.
* Clean up default layer.
* Cleanup keymap, KC60 doesn't support a 5th right bottom-row button.
* Add in the keymap I want for now.
* Back to escape by default.
* Move my personal keymap to the new place for keymaps.
* Add the version number for clarity.
* adds support for GH60 Satan keyboard
ANSI 125 layout, capslock and backlight implemented, support for
WS2812LED strip included
* added Phantom and GH60 Satan to travis
* More documentation
* Saving crontab for user on host
* Restructuring in keeping with recent changes to conventions
* Simplify submitting my fave cbbrowne keystroke by using SEND_STRING()
* Local change, not apropos to have in this repo
* Simplify logic; no need to return so much
Erez Zukerman
Jack Humbert
Peter
Teddy Ku
Anand Babu (AB) Periasamy
Gergely Nagy
dragon788
fredizzimo
Stanley Lai
Erez Zukerman
Eric Tang
Christopher Browne
Gergely Nagy
Samuel Goodwin
TerryMathews