* add feature_leader_key.md translation
* update based on comment
* set link as lang dir
* update based on comment
* update based on comment
* update based on comment
* Improve stock bootloader list
* Switch version numbers on USB64/128 bootloaders
* Unix line endings for PS2AVRGB bootloader
* Update PS2AVRGB bootloader to 1.0.1
* Also mention bootloader rule
* Didn't need to change the links
This commits add the SH_OS keycode, which works similarly to one shot
layers:
* while pressed, the keyboard is swapped
* if no keys were pressed while it was pressed, the next key press is
swapped
SH_OS also supports chaining with one shot layers:
OSL(x) + SH_OS + key interprets the key press on the oneshot layer.
The ONESHOT_TIMEOUT setting used by one shot keys and layers is also
used by oneshot swap hands. In the above chaining scenario the timeout
of the oneshot layer is reset when swap hands is activated.
Resolves#2682
* Allow 16 lighting layers
* Require #define RGBLIGHT_LAYERS_16 to enable 16 layers
* Override RGBLIGHT_MAX_LAYERS to set maximum number of lighting layers
* Enforce lower bound on RGBLIGHT_MAX_LAYERS
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* Fix an error in the check for valid RGBLIGHT_MAX_LAYERS
* Don't use bitfield / PACKED, as it causes bloat
* Update documentation re: up to 32 lighting layers
* Run cformat
* Add note about increasing FW size in docs/config_options.md
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Remove no-longer-valid comment
* Add doc note that split sync will be slower
Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Implement momentarily blink of lighting layers
* Refactor spidey3 userspace to use rgb layer blink
* Remove un-necessary line from example in documentation
* Revert "Refactor spidey3 userspace to use rgb layer blink"
This reverts commit 831649bb680c41c6d663ae6fa86d13f4f8bebdd8.
* Adds a missing bit of documentation about lighting layer blink
* Update docs/feature_rgblight.md per suggestions
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_rgblight.md per suggestions
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update docs/feature_rgblight.md per suggestions
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* cformat, as suggested
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Added raw hid feature documentation page
* Update docs/feature_rawhid.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/feature_rawhid.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/feature_rawhid.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/features.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* added feature_rawhid.md to _summary.md in docs
* fixed _summary.md order
* Update docs/feature_rawhid.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update feature_rawhid.md
Removed the useless bit about finding usage page and usage.
* Update feature_rawhid.md
* Update docs/feature_rawhid.md
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* Update docs/feature_rawhid.md
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* Update docs/feature_rawhid.md
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* Update docs/feature_rawhid.md
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* Remove teensy client, small origanization fixes
* Fixed merge conflicts
Removed features.md
Updated _summary.md with new format and added RAW HID entry under Software Features
* Added rawhid feature page
Messy is what you get when you don't do things right the first time
Co-authored-by: fauxpark <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* add 'togglePin' conveniance function
for AVR and chibios
* drop outmost parantheses
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* toggle pin on avrs
toggle a pin configured as output by writing the corresponding bit to the PIN register
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* togglepin: add documentation for newly added function
* Update docs/internals_gpio_control.md
Co-Authored-By: Konstantin Đorđević <vomindoraan@gmail.com>
* on AVR: use PORTD to toggle the output
... since not all MCUs support toggling through writing to PIN
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Johannes <you@example.com>
Co-authored-by: Konstantin Đorđević <vomindoraan@gmail.com>
Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update and try to clarify the CLI installation on Linux
* Update commands, add note for Debian/Ubuntu
* Update docs/newbs_getting_started.md
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* add feature_grave_esc.md translation
* update based on comment
* update based on comment
* update based on comment
* update based on comment
* update based on comment
Using just qmk setup <github_username> would fail w/ "Could not find repo github.com/<username>, whereas the repo is actually after another slash after the user name. Can consider changing code to add the default forked repo name if slash is not detected in the arg.
* Add support for hardware and board initialisation overrides.
* qmk cformat.
* Add some documentation.
* Docs clarity.
* Make early_hardware_init_pre a no-op for now, until migrations occur.
* Doco update
* Make distinction between keyboard and ChibiOS board in docs
* Doc anchors.
* Update tmk_core/protocol/chibios/main.c
Co-Authored-By: Joel Challis <git@zvecr.com>
* Rework bootloader entry to be off by default, allow opting-in.
Co-authored-by: Joel Challis <git@zvecr.com>
* quantum/debounce: Added sym_pk debounce algorithm
* Apply suggestions from code review
Co-Authored-By: Ryan <fauxpark@gmail.com>
* quantum/debounce/sym_pk: delete comments and rename functions following code review
* quantum/debounce/sym_pk: Modifications for code readability according to code review
* quantum/debounce/sym_pk: Modifications for code readability according to code review (2)
* quantum/debounce/sym_pk: code review: cleaner code
Co-Authored-By: Nick Brassel <nick@tzarc.org>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Add PS2_MOUSE_ROTATE to compensate for device orientation
* fixup! Add PS2_MOUSE_ROTATE to compensate for device orientation
* Reformat with IndentPPDirectives: AfterHash as per #6316
* Define NO_ACTION_MACRO/FUNCTION in header instead of makefile when LTO is enabled
Currently, boards and keymaps that define NO_ACTION_MACRO/FUNCTION unconditionally
will not compile with LTO_ENABLE (#8604). This fixes the issue by moving the
definitions from common.mk to action.h, which enables us to check for previous
definitions of those macros (this cannot be done in a makefile).
* Remove LTO checks in templates
Since now NO_ACTION_MACRO/FUNCTION are defined as needed in action.h (which is
included by quantum.h), checking for LTO in keyboard and user code is no
longer required.
* Update LTO_ENABLE docs
The list of hidden subcommands were approved by @skullydazed ;)
Currently hidden if 'user.developer' is not True:
- cformat
- docs
- kle2json
- pyformat
- pytest
* Change _delay_ms/us() to wait_ms/us()
* Switch to platform-agnostic GPIO macros
* Add AVR spi_master and migrate Adafruit BLE code
* Set verbose back to false
* Add clock divisor, bit order and SPI mode configuration for init
* Add start and stop functions
* Move configuration of mode, endianness and speed to `spi_start()`
* Some breaks here would be good
* Default Adafruit BLE clock divisor to 4 (2MHz on the Feather 32U4)
* Remove mode and divisor enums
* Add some docs
* No hr at EOF
* Add links in sidebar
* add feature part 01
* update sentences
* update sentences
* update sentences
* update file based on comment
* leave ctrl, shift, alt key name as alphabet
* update file based on comment
* update file based on comment
* update file based on comment
* update file based on comment
* remove unnecessary space on define line
* update sentence based on pull request's comment
* translate 'breathing' in document
* change expression in table
* update file based on comment
* change the word 'brightness', and update based on comment
* update based on comment
* update based on comment
* add language directory name to each internal link
* update based on comment
* update based on comment
* Rename UC_OSX (and related constants) to UC_MAC
* Update UNICODE_SONG_OSX references to UNICODE_SONG_MAC
* Update UC_M_OS references to UC_M_MA
* Add UC_OSX alias for backwards compatibility
* Add deprecation warning for UC_OSX to Unicode docs
* Add UC_M_OS alias for backwards compatibility
* Update newly found UC_M_OS and UNICODE_SONG_OSX references
* Add legacy UNICODE_MODE_OSX alias, revert changes to user keymaps
* Add legacy UNICODE_SONG_OSX alias, revert changes to user keymaps
* Replace removed sounds in Unicode song doc examples
* added the description of the reading order of the rules.mk files.
* Update docs/hardware_keyboard_guidelines.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Update docs/hardware_keyboard_guidelines.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* [Docs] Update RGB Matrix docs with function refs
* Fix up code samples
* suggestions by noroadsleft
* Fix small typo
Co-authored-by: James Young <xxiinophobia@yahoo.com>
* Improve process_record system
Code based on @colinta's
* Rename and better handle functions
* Fix incorrect function call to process_record_user
* Add documentation for post_process_record
* Add both get_event_keycode and get_record_keycode functions
And add some comments about these functions
* Update code format
* Cleanup merge artifacts
* Add Word Per Minute calculation feature
* Fix copyright info
* Remove header from quantum.c, setup overloadable keycode inclusion for WPM, update docs
* Simplify logic for keycode filtering
* Adding link from summary to wpm_feature info
* Update docs/feature_wpm.md
Typo in function prototype example in docs
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add WPM transport via i2c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add support for Bootmagic lite when using SPLIT_HAND_PIN
* Deduplicate bootmagic_lite logic from within via
* Revert location of defaults so that user overrides still work for now
* Tidy up code slightly
* [Docs] Update layer documentation
* Add layer_state_cmp functions
* Fix cut/copy/paste issue
* Add id tags
* Apply noroads corrections
* Move Layers section to separate document
* Fix ID tag for layers
* Use better name for summary/side bar
* Fix feature page linkage
As well as a small spell error close by
* Remove paper analogy for now
* Update switch to array to allow custom values
* Add adc keymap
* update docs to reflect alignment of default 10 bit
* start conversion to USE_ADCVn
* samplerate is hella wrong...stub out for now
* basic f1 and f4 functionality
* Tidy up current changes
* Restore old pinToMux function
* Add back sample rate for supported platforms
* F0 compile fixes
* wordsmithery
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Remove reference to avr only function
Co-authored-by: Ryan <fauxpark@gmail.com>
* fix CLI section links in the Summary
* fix heading in Pointing Device doc
* fix headings in PS/2 Mouse Support doc
* add explicit section ids to I2C Master Driver doc
* reformat GPIO Controls table
Much like the I2C Master Driver doc, I found this a bit less than ideal to read. (The table was actually wider than the space available for it.)
Reformatted so each GPIO function is an H3 heading, followed by a paragraph and a table of each architecture's old-style function.
* migrate changes from I2C Master Driver doc to Japanese translation
* add explicit anchors to I2C Master Driver docs
* fix code block language markers
The language markers are case-sensitive; using the wrong case means the syntax highlighting doesn't work.
Good: ```c
Bad: ```C
* restore Japanese I2C Master Driver doc to current master
Can't update the internal tracking references accurately until the changes to the English doc are committed to master.
* add explicit anchors to edited files
* change ChibiOS/ARM to ARM/ChibiOS
Because ARM/ATSAM is also a thing that exists.
* fix code block language markers again
Used the wrong markers in a few spots. Also these are apparently always supposed to be lowercase.
* add section anchors to cli.md
* restore table formatting on GPIO Control doc
* remove changes to _summary.md
* fix some broken links
* remove duplicate and confusing material from cli.md
* Switch brazil to the 2 letter country code
* Update docs/_langs.md
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Rearrange the custom CSS a bit.
* fix css name
* add missing quote
* Fix up dark mode rendering. (#8392)
* Fix up dark mode rendering.
* Update index.html
* Fix up code blocks
* Fix code in page toc
* Update docs/qmk_custom_dark.css
Co-Authored-By: Ryan <fauxpark@gmail.com>
Co-authored-by: skullY <skullydazed@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add support for STM32L0/L1 onboard EEPROM.
* Update docs/eeprom_driver.md
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* New feature: RGBLIGHT_LAYERS
This feature allows users to define multiple independent layers of lighting
that can be toggled on and off individually, making it easy to use your
RGB lighting to indicate things like active keyboard layer & modifier state.
* Demonstrate built in functions for layer state checking
Also link the video in the docs.
* Follow existing pattern for setting rgblight_status flags
* Eliminate rgblight_is_static_mode since it's not needed
Just check to see if the timer is enabled directly.
* Add buffer based single line pan, arbitrary byte write to buffer
* Change dirty mask to inverse of OLED_BLOCK_TYPE for future proofing larger buffer sizes
* Updating docs to include new functions
* Updating to clarify scroll vs pan
- minor typo on intro paragraph (the -> them)
- remove note about :check-size target (`make` task now does this automatically)
- heading level for Caterina commands section
- typo regarding Halfkay (come -> comes)
* [Docs] Update ISP Flashing guide
* Apply suggestions from code review
AKA why you shouldn't write docs at 2am
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update workding for planck-qmk-dfu
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* complete translation.
* Update docs/ja/feature_tap_dance.md
Update the file based on the suggestions.
* Update docs/ja/feature_tap_dance.md
Update the file based on the suggestions.
* Apply suggestions from code review
Update the file based on the suggestions.
* Apply suggestions from code review
Update the file based on the suggestions (Part 2).
* Apply suggestions from code review
Update the file based on the suggestions (Part 3).
* Apply suggestions from code review
Update the file based on the suggestions (Part 3).
* Apply suggestions from code review
Update the file based on the suggestions (Part 4).
* Apply suggestions from code review
Update the file based on the suggestions (Part 5).
ご提案いただいた修正案は全て確認できました。
続いて、コメント行の調整、「打つ・叩く」の変更、その他の修正を行います。
* fixed typo.
* Update the file based on the suggestions (Part 6).
* Update the file based on the suggestions (Part 7).
* Fixed sentence.
* Update docs/ja/feature_tap_dance.md
Update the file based on the suggestions (Part 8).
* Update the file based on the suggestions (Part 9).
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-Authored-By: shela <shelaf@users.noreply.github.com>
* Add link to "Useful functions" in macro docs
Help people find additional features they can activate within a macro
* Update docs/feature_macros.md
Co-Authored-By: Drashna Jaelre <drashna@live.com>
Co-authored-by: skullydazed <skullydazed@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add detail-guide part
* some updates for easy reading
* some updates for easy reading
* some updates for easy reading
* some updates for easy reading
* some updates for easy reading
* some updates for easy reading
* some updates for easy reading
* some updates for easy reading
* update file based on comment
* update file based on comment
* update file based on comment
* update git command in header
* update files based on comments, and update git command in header
* update file based on comment
* update file based on comment
* update file based on comment
* update file based on comment
* update file based on comment
* update file based on comment
* update file based on comment
* update file based on comment
Co-Authored-By: shela <shelaf@users.noreply.github.com>
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* Fix out of bound OLED font access
The default font is 1344 bytes, or a total of 224 glyphs (each 6-bytes wide).
OLED_FONT_END defaults to 224, which if used will then index off the end of
the font array. So either the documentation or code is wrong.
Instead of figuring out the rewording of the documentation, just change
the OLED_FONT_END default value to 223, to match the documentation and code.
* Add static assert to check array size
Build bomb if the font array size doesn't match to the defines.
* update zh-cn translate
Timestamp was added at the end of the document, it can help me manage version easier.
* fix _summary.md to utf-8
* fix _summary.md with vscode
- uprintf -> dprintf
- Fix atsam "vendor" eeprom.
- Bump Kinetis K20x to 64 bytes, too.
- Rollback Kinetis to 32 bytes as partitioning can only be done once. Add warning about changing the value.
- Change RAM-backed "fake" EEPROM implementations to match eeconfig's current usage.
- Add 24LC128 by request.
* Define default HSV and speed for RGB matrix.
* Documentation for configuration values RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT and RGB_MATRIX_STARTUP_VAL.
* Document RGB_MATRIX_STARTUP_SPD.
* Preserve the ordering.
* Implement IGNORE_MOD_TAP_INTERRUPT_PER_KEY
- Add configurable option IGNORE_MOD_TAP_INTERRUPT_PER_KEY
- Add function get_ignore_mod_tap_interrupt iff the option is enabled
Unless IGNORE_MOD_TAP_INTERRUPT_PER_KEY is defined, this patch does not affect the resulting binary.
* Add documentation for IGNORE_MOD_TAP_INTERRUPT_PER_KEY
* Left-right gradient.
* Update the comment to match the new functionality.
* CPP does integer division so this round is not necessary.
* The x-range is actually 224, update comment and use bit-shifting again.
* Update docs with gradient left-right effect and associated "DISABLE" option.
* add faq part
* add faq part
* add faq part
* add faq part
* add faq part
* update for link
* update for a punctuation
* update files based on comments
* restore removed git diff header
* correct pathname on git diff header
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update file based on comment
* update file based on comment
* update file based on comment
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-Authored-By: shela <shelaf@users.noreply.github.com>
Co-Authored-By: satt99 <39004890+satt99@users.noreply.github.com>
* add basic part
* update cli
* update cli
* correct links to ja document
* update files based on comments
* update for a postpositional particle
* update for a punctuation
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
Co-Authored-By: shela <shelaf@users.noreply.github.com>
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
* fix instructions for oneshot layer handling on key release
* use ONESHOT_OTHER_KEY_PRESSED instead of ONESHOT_PRESSED
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Improve support and docs for ADC driver
* Comment ADC channels
* Move to Makers and Modders section, and fix usage instructions
* Flesh out intro
* Superscript 328P note
* Fix pin_to_mux LUT
* Support USB64/1287 as well
* analogReadPin() defaults to 0V mux on invalid pin
* Update pinToMux() function documentation
* Dot
* Accept (some of) the `qmk cformat` changes
* Do clang-format properly
* More wording tweaks
* Link to encoder docs
* Update getting_started_make_guide.md
clarifying that NO_PRINT and USER_PRINT should not be used at the same time.
* Update docs/getting_started_make_guide.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add "Resynchronizing an Out-of-Sync Git Branch" doc
* Update (Git) Best Practices doc title and filename
* Rename Branch Resync doc
* fork Best Practices doc into multiple files
* Add the doc list to Git Best Practices doc
* Update sidebar
* Update internal references
* Update sidebar - add subsection
* Update Your Fork's Master page title
* title case on Git Best Practices main doc
* ... and in the Resynchronizing a Branch doc
* Please read Part 1
I worked really hard on this, okay?
* Please use branches, too.
* suggestions by mtei
* change note about adding multiple files
* note that the name given the remote repo is arbitrary
* suggestions by fauxpark
* Git Best Practices -> Best Git Practices
Reads more naturally.
* rephrase hint block regarding remote name
* rework the resynchronization instructions per mtei
* use hint boxes for reference to Part 1 doc
I may be addicted to hint boxes. I'm sorry fauxpark. 😢
* add some clarity about the upstream repo
* wordsmithing per mtei
* restyle the shell code blocks
Makes them more consistent to the other docs in this section.
* for initial commit
* for initial commit
* for initial commit
* Update led_update_kb example (#7451)
* Update led_update_kb example
* Update comment to explain pin behavior
* wordsmith
* wordsmithing 2
* Remove CR when computing BOOTLOADER_SIZE. (#7453)
* Set up language fallback for docs, and update translation guidelines (#7403)
* Set up language fallback for docs, and update translation guidelines
* Title Case
* Add ID example
* Link to emoji flag cheatsheet
* Move docs preview section to contributing.md
* Point to docs preview in the readme
* [Keyboard] Added Cans12er keyboard (#7455)
* added cans12er keyboard
* updated readme
Updated the readme to conform with the provided template from the qmk_firmware githubpage
* Update keyboards/cans12er/README.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Changed configuration
Changed the configuration based on the Change Request from PR #7455 made by github user noroadsleft
* [Keyboard] Update ATmega32A readme files to match template (#7462)
* Update atmega32a readme files to match template
* Update atmega32a readme files to match template - fixes
* Apply suggestions from code review
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
* update files based on comments
Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-Authored-By: shela <shelaf@users.noreply.github.com>
* Add shift-to-invert to remaining directional RGB_* keycode pairs
RGB_MODE_FORWARD / RGB_MODE_REVERSE invert their functions when shift is held.
This change adds the same capabilities to the remaining directional RGB_*
keycode pairs. This improves consistency and provides full RGB control in a
keymap containing only one keycode from each pair.
* remove redundant variable
* fix typo
* Fix more typos
Flyspell is on now I swear!
* Install bootloadHid on macos
* Install bootloadHid on windows
* Highlight bootloadHID is now installed in docs
* Update udev rules for bootloadHID
* Install bootloadHid on some distros
* fix caterina udev filename
* Set up language fallback for docs, and update translation guidelines
* Title Case
* Add ID example
* Link to emoji flag cheatsheet
* Move docs preview section to contributing.md
* Point to docs preview in the readme
* f
* Allow overriding of all functions in wonderland.c
- needed for custom LED functions in keymap.c
* Example of layer indication via LEDs
optimize
* Use newer led_update_kb and led_update_user hooks
- these allow overriding without use of __attribute((weak))__
* Update led documentation a bit
- clarify some of the wording around how to use led_update_user
* Update led_update_user example
* Update audio example to be complete
* trailing spaces smh
* spaces
* spaces
* smh
* Less code is good
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update docs/custom_quantum_functions.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update japanese translation of newbs.md and related documents.
* document link id change
* add `ja/` in each link
`[xxx](yyy.md)` --> `[xxx](ja/yyy.md)`
* copy docs/ja/_summary.md from umi-umi's #7248 and fix it
* Initial commit
* Fix links so that they point to the german translation
* minor changes to the wording of some sentences
* correctly capitalize second person pronouns
* Fix links so that they point to the german translation
* minor changes to the wording of some sentences
* correctly capitalize second person pronouns
* Translate newbs_learn_more_resources.md
* Clear up some phrases
* Add newbs_building_firmware.md, fix spelling
* Add newbs_building_firmware.md, fix spelling
* Update docs/de/_summary.md
Danke
* Update docs/de/README.md
* Update docs/de/_summary.md
Ich wollte es kuerzer halten damit die Navigationsleiste nicht zu breit wird, aber das ist halt die deutsche Sprache :)
* Update docs/de/newbs.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs.md
* Update docs/de/newbs_learn_more_resources.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs.md
* Update docs/de/newbs.md
* Update docs/de/newbs.md
* Update docs/de/README.md
* Update docs/de/README.md
* Update docs/de/README.md
* Update docs/de/README.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_learn_more_resources.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_learn_more_resources.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_learn_more_resources.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_getting_started.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Update docs/de/newbs_building_firmware.md
* Apply suggestions from code review
* Add translation of newbs_flashing.md
* Apply suggestions from code review
Danke
* Add translation of Zadig-guide
* Translate newbs_testing_debugging.md to german
Co-Authored-By: Max Rumpf <max.rumpf1998@gmail.com>
Co-Authored-By: geisterfurz007 <geisterfurz007@users.noreply.github.com>
A new CLI subcommand was added, flash, which behaves very similar to the already present compile CLI comamnd, but with the added ability to target a bootloader. The command is used like so: qmk flash [-h] [-b] [-kb KEYBOARD] [-km KEYMAP] [-bl BOOTLOADER] [filename].
A -kb <keyboard> and -km <keymap> is expected, or a configurator export JSON filename. A bootloader can be specified using -bl <target>, and if left unspecified, the target is assumed to be :flash. -bl can be used to list the available bootloaders.
If -km <keymap> is provided, but no -kb <keyboard>, then a message is printed suggesting the user to run qmk list_keyboards.
* Error out when Solenid pin is not defined
Instead of defaulting to a (literally) random pin, error out instead. Because this pin may be used, or because that pin may not be exposed, or may not exist.
* Remove 'SOLENOID_ACTIVE' setting since it's not used
* Update documentation
* Add initial pass at KLE convert
* Add cli log on convert
* Move kle2xy, add absolute filepath arg support
* Add overwrite flag, and context sensitive conversion
* Update docs/cli.md
* Fix converter.py typo
* Add convert unit test
* Rename to kle2qmk
* Rename subcommand
* Rename subcommand to kle2json
* Change tests to cover rename
* Rename in __init__.py
* Update CLI docs with new subcommand name
* Fix from suggestions in PR #6898
* Help with cases of case sensitivity
* Update cli.md
* Use angle brackets to indicate required option
* Make the output text more accurate
* Fix unicode in comments
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove separate RGBW implementation for a unified function
* Set White to 0 in RGBW LEDs
This is just to get this working, later, proper brightness can be handled elsewhere.
* Use us instead of nanoseconds(?) since it renders correctly on web
* Remove RGBW function from arm/ws2812.h
* Remove RGBW function from arm/ws2812.c
* Formatting changes
* Add doc info
* Tidy up compatible MCUs docs
* ARM chips should have USB
* 32KB soft lower limit applies to ARM as well
* NXP is the manufacturer name, not Kinetis
* Units
* Initial ARM bitbang ws2812 driver
* Unify chibios platform to run rgblight_task
* Remove 'avr only' comments from ws2812 docs
* Remove 'avr only' comments from ws2812 docs
* Unify chibios platform to run rgblight_task - review comments
* Remove debug flags from keymap
* Add comments from review
* Add defines for STM32L0XX
* Attempt to get arm ws2812 working on multiple gcc versions
* Convert Dynamic Macro to a Core Feature
This imports the code from Dynamic Macro into the core code, and handles it, as such.
This deprecates the old method but does not remove it, for legacy support. This way, no existing user files need to be touched.
Additionally, this reorganizes the documentation to better reflect the changes.
Also, it adds user hooks to the feature so users can customize the existing functionality.
Based heavily on and closes#2976
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Cleanup based on feedback
* Add short-form keycodes and document them
- add short-form keycodes to quantum/quantum_keycodes.h
- document the new aliases in docs/feature_dynamic_macros.md
* Add Dynamic Macros section and keycodes to docs/keycodes.md
* Make anti-nesting optional
* Add documentation for DYNAMIC_MACRO_NO_NESTING option
* Fix Merge artifacts
* Fix formatting typo in docs
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Remove DYNAMIC_MACRO_RANGE as it's not needed
* Fix includes and layer var type
umi
Nick Brassel
Drashna Jaelre
Nick Blyumberg
Ryan
Zsolt Parragi
Joshua Diamond
floookay
James Young
Joel Challis
Ahmed Elshafey
JohSchneider
Alexander Hart
Erovia
Takeshi ISHII
Chris Ko
skullydazed
mimkorn
Konstantin Đorđević
Purdea Andrei
Manna Harbour
shela
Takuya Urakawa
Bram de Wilde
brickbots
Frei
Andy Jack
francislan
James Young
Drew Mills
Nathan Gray
kymok
Shaun
skullY
s-show
ridingqwerty
Jez Cope
Akaash Suresh
Ted M Lin
ymzcdg
Cody Bender
Rob Haswell
zk-phi
Casper Weiss Bang
Duncan Elliot
Igor Hideki Trindade
hmkemppainen
osjuga
Gregory Gubarev
arlenk
Yan-Fa Li
kuchosauronad0
Mihai Olteanu
Robert Akhmerov
jorgemanzo