* The TAG of the original document has been updated to facilitate future verification.
* The TAG of the original document has been updated to facilitate future verification.
* The TAG of the original document has been updated to facilitate future verification.
* Fix incorrect delay when setting WS2812 (and similar) leds
* Add documentation for WS2812_DELAY_MICROSECONDS
* Remove improper cast to uint8_t
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
* Remove unneeded cast to uint8_t and correct math
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
* microseconds -> µs
Co-authored-by: Ryan <fauxpark@gmail.com>
* Make documentation better match the spec sheet.
Co-authored-by: Ryan <fauxpark@gmail.com>
* Rename macro to match spec sheet
* Further correction to the delay maths for the SPI case.
Co-authored-by: Joel Challis <git@zvecr.com>
* Move ws2812_common.h to the drivers directory
* Revert "Further correction to the delay maths for the SPI case."
This reverts commit e61b56a2cfc7dfec9992a7a3af92afa50e5b8ec0.
* Remove ws2812_setleds_pin(); consolidate ws2812.h
Co-authored-by: Sergey Vlasov <sigprof@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
PR #9307 fixed the immediately visible problem (the command that was
added to $HOME/.bashrc was incorrect because of missing quotes around
paths with spaces). However, the modified command is still wrong - it
captures the value of $PATH at the setup time, and the resulting command
written out to $HOME/.bashrc will overwrite $PATH with that captured
value, ignoring any changes in the environment. This may be especially
important for WSL, where the initial value of $PATH in Linux includes
everything which has been added to %PATH% on the Windows side; after
adding that command to $HOME/.bashrc the WSL environment will no longer
pick up any changes made by newly installed Windows software.
Instead of that, use single quotes around the command, so that the
environment variables are not expanded at the setup time, and the
command that is added to $HOME/.bashrc becomes exactly this:
PATH="$HOME/.local/bin:$PATH"
This command will use the $HOME and $PATH environment variable values at
the time the command is executed, not at the time the QMK setup is
performed, so any further updates to $PATH are taken into account.
Double quotes also ensure that the command is safe even if the values of
those environment variables contain spaces.
* Change `echo` to `export`
* Add `export` as a note under the `echo` command
* Remove note from last commit
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update docs/newbs_getting_started.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update docs/newbs_getting_started.md
Add 1 line of whitespace under note
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initial doco write-up.
* Update docs/platformdev_selecting_arm_mcu.md
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Updated the Japanese translation of newbs_learn_more_resources.md
Updated the Japanese translation of newbs_learn_more_resources.md to 0.9.0.
* update docs/ja/newbs_learn_more_resources.md
* update ja/newbs_learn_more_resources.md
* add feature_mouse_keys.md translation
* update based on comment
* update based on comment
* update based on comment
* update based on comment
* update based on comment
* Branch point for 2020 May 30 Breaking Change
* Migrate `ACTION_LAYER_TOGGLE` to `TG()` (#8954)
* Migrate `ACTION_MODS_ONESHOT` to `OSM()` (#8957)
* Migrate `ACTION_DEFAULT_LAYER_SET` to `DF()` (#8958)
* Migrate `ACTION_LAYER_MODS` to `LM()` (#8959)
* Migrate `ACTION_MODS_TAP_KEY` to `MT()` (#8968)
* Convert V-USB usbdrv to a submodule (#8321)
* Unify Tap Hold functions and documentation (#8348)
* Changing board names to prevent confusion (#8412)
* Move the Keyboardio Model01 to a keyboardio/ subdir (#8499)
* Move spaceman keyboards (#8830)
* Migrate miscellaneous `fn_actions` entries (#8977)
* Migrate `ACTION_MODS_KEY` to chained mod keycodes (#8979)
* Organizing my keyboards (plaid, tartan, ergoinu) (#8537)
* Refactor Lily58 to use split_common (#6260)
* Refactor zinc to use split_common (#7114)
* Add a message if bin/qmk doesn't work (#9000)
* Fix conflicting types for 'tfp_printf' (#8269)
* Fixed RGB_DISABLE_AFTER_TIMEOUT to be seconds based & small internals cleanup (#6480)
* Refactor and updates to TKC1800 code (#8472)
* Switch to qmk forks for everything (#9019)
* audio refactor: replace deprecated PLAY_NOTE_ARRAY (#8484)
* Audio enable corrections (2/3) (#8903)
* Split HHKB to ANSI and JP layouts and Add VIA support for each (#8582)
* Audio enable corrections (Part 4) (#8974)
* Fix typo from PR7114 (#9171)
* Augment future branch Changelogs (#8978)
* Revert "Branch point for 2020 May 30 Breaking Change"
* Fixed the indentation of the sample code in docs/feature_pointing_device.md sample.
* Update docs/feature_pointing_device.md
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* ARM split - Add uart half duplex transport support
* Fix for f103
* initial full duplex pass
* partially remove full duplex
* Correct speeds within driver docs
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* newbs_flashing.md: place bootloader instructions before Toolbox intro
* Update docs/newbs_flashing.md
* More wordsmithing, point ARM users at Discord if all else fails
* Link Discord
* CLI: Improve experience when running `qmk setup` on FreeBSD.
* Install the `avrdude` package as well.
* Switch to installing python packages w/ `--user` flag.
* Basic getting started sections for FreeBSD.
* Update `util/freebsd_install.sh` for root/non-root branches.
* Add ID to doc section.
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Add ID to another docs section.
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Use `; then` in script for consistency.
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Updated to use sudo in one shot if available.
* Apply suggestions from code review
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* Style fixes for latest version in master.
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: skullydazed <skullydazed@users.noreply.github.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* add feature_leader_key.md translation
* update based on comment
* set link as lang dir
* update based on comment
* update based on comment
* update based on comment
* Improve stock bootloader list
* Switch version numbers on USB64/128 bootloaders
* Unix line endings for PS2AVRGB bootloader
* Update PS2AVRGB bootloader to 1.0.1
* Also mention bootloader rule
* Didn't need to change the links
This commits add the SH_OS keycode, which works similarly to one shot
layers:
* while pressed, the keyboard is swapped
* if no keys were pressed while it was pressed, the next key press is
swapped
SH_OS also supports chaining with one shot layers:
OSL(x) + SH_OS + key interprets the key press on the oneshot layer.
The ONESHOT_TIMEOUT setting used by one shot keys and layers is also
used by oneshot swap hands. In the above chaining scenario the timeout
of the oneshot layer is reset when swap hands is activated.
Resolves#2682
Takeshi ISHII
Joshua Diamond
Xelus22
Jason Laqua
Ryan
Reed
jems-lee
umi
Sergey Vlasov
neon4272
Nick Brassel
precondition
Drashna Jaelre
itsnoteasy
Pete Johanson
Kimat Boven
James Young
Zach White
Joel Challis
skullY
Nick Blyumberg
Zsolt Parragi