qmk-dactyl-manuform-a/keyboards/ergodox_ez
Drashna Jaelre b83e3ae556
[Keyboard] Ergodox EZ - Re-init ISSI driver on reconnect (#7731)
2020-01-01 22:42:04 -08:00
..
keymaps [Keyboard] Remove `PREVENT_STUCK_MODIFIERS` from config.h files (#7592) 2019-12-09 16:00:27 -08:00
util [Keyboard] add keymap beautifier for Ergodox EZ (#4393) 2019-11-04 23:14:15 -08:00
190hotfix.sh
config.h Move Ergodox EZ RGB Light code to custom driver (#7309) 2019-11-14 12:00:51 -08:00
ergodox_ez.c [Keyboard] Updates to ZSA boards (#6513) 2019-08-21 17:19:07 -07:00
ergodox_ez.h [Keyboard] Updates to ZSA boards (#6513) 2019-08-21 17:19:07 -07:00
info.json Removes Erez personally from QMK (#5883) 2019-05-15 19:53:45 -04:00
led_i2c.c Use White channel on RGBW LEDs (#7678) 2019-12-31 16:33:49 +00:00
matrix.c [Keyboard] Ergodox EZ - Re-init ISSI driver on reconnect (#7731) 2020-01-01 22:42:04 -08:00
post_config.h Move Ergodox EZ RGB Light code to custom driver (#7309) 2019-11-14 12:00:51 -08:00
readme.md Syntax update (#2660) 2018-04-24 09:49:34 -07:00
rules.mk Move Ergodox EZ RGB Light code to custom driver (#7309) 2019-11-14 12:00:51 -08:00

readme.md

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.