Move Ergodox EZ RGB Light code to custom driver (#7309)

* Move Ergodox EZ RGB code to custom driver

Also implements full addressing of Ergodox EZ's LED Strip, as written by seebs
Co-authored-by: Seebs <seebs@seebs.net>

* Make Clipping range accessible for custom drivers

* Remove RGBW_BB_TWI from driver and docs

* Revert changes to clipping range support

* Use just rgblight_set instead of full custom driver

* Convert to i2c_master commands

* Rename rgblight driver and clean up includes
master
Drashna Jaelre 2019-11-14 12:00:51 -08:00 committed by GitHub
parent 8dc9764f31
commit 1cf63a193b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 120 additions and 132 deletions

View File

@ -36,108 +36,6 @@
void ws2812_sendarray(uint8_t *array, uint16_t length);
void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask);
#ifdef RGBW_BB_TWI
// Port for the I2C
# define I2C_DDR DDRD
# define I2C_PIN PIND
# define I2C_PORT PORTD
// Pins to be used in the bit banging
# define I2C_CLK 0
# define I2C_DAT 1
# define I2C_DATA_HI() \
I2C_DDR &= ~(1 << I2C_DAT); \
I2C_PORT |= (1 << I2C_DAT);
# define I2C_DATA_LO() \
I2C_DDR |= (1 << I2C_DAT); \
I2C_PORT &= ~(1 << I2C_DAT);
# define I2C_CLOCK_HI() \
I2C_DDR &= ~(1 << I2C_CLK); \
I2C_PORT |= (1 << I2C_CLK);
# define I2C_CLOCK_LO() \
I2C_DDR |= (1 << I2C_CLK); \
I2C_PORT &= ~(1 << I2C_CLK);
# define I2C_DELAY 1
void I2C_WriteBit(unsigned char c) {
if (c > 0) {
I2C_DATA_HI();
} else {
I2C_DATA_LO();
}
I2C_CLOCK_HI();
_delay_us(I2C_DELAY);
I2C_CLOCK_LO();
_delay_us(I2C_DELAY);
if (c > 0) {
I2C_DATA_LO();
}
_delay_us(I2C_DELAY);
}
// Inits bitbanging port, must be called before using the functions below
//
void I2C_Init(void) {
I2C_PORT &= ~((1 << I2C_DAT) | (1 << I2C_CLK));
I2C_CLOCK_HI();
I2C_DATA_HI();
_delay_us(I2C_DELAY);
}
// Send a START Condition
//
void I2C_Start(void) {
// set both to high at the same time
I2C_DDR &= ~((1 << I2C_DAT) | (1 << I2C_CLK));
_delay_us(I2C_DELAY);
I2C_DATA_LO();
_delay_us(I2C_DELAY);
I2C_CLOCK_LO();
_delay_us(I2C_DELAY);
}
// Send a STOP Condition
//
void I2C_Stop(void) {
I2C_CLOCK_HI();
_delay_us(I2C_DELAY);
I2C_DATA_HI();
_delay_us(I2C_DELAY);
}
// write a byte to the I2C slave device
//
unsigned char I2C_Write(unsigned char c) {
for (char i = 0; i < 8; i++) {
I2C_WriteBit(c & 128);
c <<= 1;
}
I2C_WriteBit(0);
_delay_us(I2C_DELAY);
_delay_us(I2C_DELAY);
// _delay_us(I2C_DELAY);
// return I2C_ReadBit();
return 0;
}
#endif
// Setleds for standard RGB
void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {
// ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin));
@ -145,38 +43,15 @@ void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) {
}
void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask) {
#ifdef RGBW_BB_TWI
uint8_t sreg_prev, twcr_prev;
sreg_prev = SREG;
twcr_prev = TWCR;
cli();
TWCR &= ~(1 << TWEN);
I2C_Init();
I2C_Start();
I2C_Write(0x84);
uint16_t datlen = leds << 2;
uint8_t curbyte;
uint8_t *data = (uint8_t *)ledarray;
while (datlen--) {
curbyte = *data++;
I2C_Write(curbyte);
}
I2C_Stop();
SREG = sreg_prev;
TWCR = twcr_prev;
#endif
// ws2812_DDRREG |= pinmask; // Enable DDR
// new universal format (DDR)
_SFR_IO8((RGB_DI_PIN >> 4) + 1) |= pinmask;
ws2812_sendarray_mask((uint8_t *)ledarray, leds * sizeof(LED_TYPE), pinmask);
#ifndef RGBW_BB_TWI
# ifdef RGBW
#ifdef RGBW
_delay_us(80);
# else
#else
_delay_us(50);
# endif
#endif
}

View File

@ -75,17 +75,21 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* ws2812 RGB LED */
#define RGB_DI_PIN D7
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 15 // Number of LEDs
#define RGBLIGHT_HUE_STEP 12
#define RGBLIGHT_SAT_STEP 255
#define RGBLIGHT_VAL_STEP 12
// Pick one of the modes
// Defaults to 15 mirror, for legacy behavior
// #define ERGODOX_LED_15 // Addresses 15 LEDs, but same position on both halves
// #define ERGODOX_LED_15_MIRROR // Addresses 15 LEDs, but are mirrored
// #define ERGODOX_LED_30 // Addresses all 30 LED individually
/* fix space cadet rollover issue */
#define DISABLE_SPACE_CADET_ROLLOVER
#define RGBW_BB_TWI
#define RGBW 1
#define RGBW
#define RGBLIGHT_SLEEP

View File

@ -0,0 +1,86 @@
/*
* light weight WS2812 lib V2.0b
*
* Controls WS2811/WS2812/WS2812B RGB-LEDs
* Author: Tim (cpldcpu@gmail.com)
*
* Jan 18th, 2014 v2.0b Initial Version
* Nov 29th, 2015 v2.3 Added SK6812RGBW support
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef RGBLIGHT_ENABLE
# include "ws2812.c"
# include "ergodox_ez.h"
extern rgblight_config_t rgblight_config;
/*
* Forward declare internal functions
*
* The functions take a byte-array and send to the data output as WS2812 bitstream.
* The length is the number of bytes to send - three per LED.
*/
void ws2812_sendarray(uint8_t *array, uint16_t length);
void ws2812_sendarray_mask(uint8_t *array, uint16_t length, uint8_t pinmask);
void rgblight_set(void) {
if (!rgblight_config.enable) {
for (uint8_t i = 0; i < RGBLED_NUM; i++) {
led[i].r = 0;
led[i].g = 0;
led[i].b = 0;
#ifdef RGBW
led[i].w = 0;
#endif
}
}
uint8_t led_num = RGBLED_NUM;
i2c_init();
i2c_start(0x84, ERGODOX_EZ_I2C_TIMEOUT);
int i = 0;
# if defined(ERGODOX_LED_30)
// prevent right-half code from trying to bitbang all 30
// so with 30 LEDs, we count from 29 to 15 here, and the
// other half does 0 to 14.
led_num = RGBLED_NUM / 2;
for (i = led_num + led_num - 1; i >= led_num; --i)
# elif defined(ERGODOX_LED_15_MIRROR)
for (i = 0; i < led_num; ++i)
# else // ERGDOX_LED_15 non-mirrored
for (i = led_num - 1; i >= 0; --i)
# endif
{
uint8_t *data = (uint8_t *)(led + i);
i2c_write(*data++, ERGODOX_EZ_I2C_TIMEOUT);
i2c_write(*data++, ERGODOX_EZ_I2C_TIMEOUT);
i2c_write(*data++, ERGODOX_EZ_I2C_TIMEOUT);
#ifdef RGBW
i2c_write(*data++, ERGODOX_EZ_I2C_TIMEOUT);
#endif
}
i2c_stop();
ws2812_setleds(led, RGBLED_NUM);
}
#endif // RGBLIGHT_ENABLE

View File

@ -0,0 +1,20 @@
#pragma once
#if !defined(ERGODOX_LED_15) && !defined(ERGODOX_LED_30)
// if no value is defined, assume previous behavior
// # define ERGODOX_LED_15
// # define ERGODOX_LED_30
# define ERGODOX_LED_15_MIRROR
#endif
#if (defined(ERGODOX_LED_30) + defined(ERGODOX_LED_15) + defined(ERGODOX_LED_15_MIRROR)) != 1
# error "You must only define one of the ERGODOX_LED options."
#endif
#ifdef ERGODOX_LED_30
// If using 30 LEDs, then define that many
# define RGBLED_NUM 30 // Number of LEDs
#else
// If not, then only define 15
# define RGBLED_NUM 15 // Number of LEDs
#endif

View File

@ -31,11 +31,14 @@ SWAP_HANDS_ENABLE= yes # Allow swapping hands of keyboard
SLEEP_LED_ENABLE = no
API_SYSEX_ENABLE = no
RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
RGB_MATRIX_ENABLE = no # enable later
DEBOUNCE_TYPE = eager_pr
# project specific files
SRC += matrix.c
SRC += matrix.c \
led_i2c.c
QUANTUM_LIB_SRC += i2c_master.c
LAYOUTS = ergodox