qmk-dactyl-manuform-a/docs/feature_bootmagic.md

Bootmagic and Magic Keycodes

There are 3 separate but related features that allow you to change the behavior of your keyboard without reflashing. While each of them have similar functionality you access that functionality in different ways depending on how your keyboard is configured.

Bootmagic is a system for configuring your keyboard while it initializes. To trigger a Bootmagic command you hold down the bootmagic key (KC_SPACE on most keyboards) and one or more command keys.

Bootmagic Keycodes allow you to access the Bootmagic functionality after your keyboard has initialized. To use Bootmagic Keycodes you assign keycodes starting with MAGIC_, much in the same way you define any other key.

Command is a feature that allows you to control different aspects of your keyboard. Command used to be called Magic. Command is typically accessed by holding Left and Right Shift at the same time, although that can be customized. While it shares some functionality with Bootmagic it also allows you to access functionality that Bootmagic does not. For more information see the (Command)[feature_command.md) documentation page.

Enabling Bootmagic

Bootmagic is disabled by default. To use Bootmagic you need to enable it in your rules.mk file:

BOOTMAGIC_ENABLE = yes

Bootmagic Hotkeys and Keycodes

This table describes the default Hotkeys for Bootmagic and the Keycodes for Magic. These may be overriden at the Keyboard or Keymap level. Some functionality is not available in both methods.

To use the Hotkey hold down BOOTMAGIC_KEY_SALT (KC_SPACE by default) and the Hotkey while plugging in your keyboard. To use the Keycode assign that keycode to a layer. For example, if you hold down Space+B while plugging in most keyboards, you will enter bootloader mode.

Hotkey	Keycode	Description
ESC		Skip bootmagic and saved eeprom configuration
B	RESET	Enter bootloader instead of firmware
D	DEBUG	Enable debugging (writes messages to serial)
X		Enable matrix debugging
K		Enable keyboard debugging
M		Enable mouse debugging
BACKSPACE		Clear the saved settings from flash
CAPSLOCK	MAGIC_CAPSLOCK_TO_CONTROL	Treat Capslock as Control
	MAGIC_UNCAPSLOCK_TO_CONTROL	Stop treating CapsLock as Control
LCTRL	MAGIC_SWAP_CONTROL_CAPSLOCK	Swap Control and Capslock
	MAGIC_UNSWAP_CONTROL_CAPSLOCK	Unswap Left Control and Caps Lock
	MAGIC_SWAP_ALT_GUI	Swap Alt and GUI on both sides
	MAGIC_UNSWAP_ALT_GUI	Unswap Left Alt and GUI
LALT	MAGIC_SWAP_LALT_LGUI	Swap Left Alt and GUI, e.g. for OSX Opt and Cmd
	MAGIC_UNSWAP_LALT_LGUI	Unswap Left Alt and GUI
RALT	MAGIC_SWAP_RALT_RGUI	Swap Right Alt and GUI
	MAGIC_UNSWAP_RALT_RGUI	Unswap Right Alt and GUI
LGUI	MAGIC_NO_GUI	Disable GUI key - e.g. disable Windows key during gaming
	MAGIC_UNNO_GUI	Enable the GUI key
GRAVE	MAGIC_SWAP_GRAVE_ESC	Swap \~andESC`
	MAGIC_UNSWAP_GRAVE_ESC	Unswap \~` and Escape
BACKSLASH	MAGIC_SWAP_BACKSLASH_BACKSPACE	Swap Blackslash and Backspace
	MAGIC_UNSWAP_BACKSLASH_BACKSPACE	Unswap Backslash and Backspace
N	MAGIC_HOST_NKRO	Force N-Key Rollover (NKRO) on
	MAGIC_UNHOST_NKRO	Force NKRO off
	MAGIC_TOGGLE_NKRO	Toggle NKRO on or off
0	DF(0)	Make Layer 0 the default layer at bootup
1	DF(1)	Make Layer 1 the default layer at bootup
2	DF(2)	Make Layer 2 the default layer at bootup
3	DF(3)	Make Layer 3 the default layer at bootup
4	DF(4)	Make Layer 4 the default layer at bootup
5	DF(5)	Make Layer 5 the default layer at bootup
6	DF(6)	Make Layer 6 the default layer at bootup
7	DF(7)	Make Layer 7 the default layer at bootup

Bootmagic Configuration

When setting up your keyboard and/or keymap there are a number of #defines that control the behavior of Bootmagic. To use these put them in your config.h, either at the keyboard or keymap level.

Define	Default	Description
BOOTMAGIC_KEY_SALT	KC_SPACE	The key to hold down to trigger Bootmagic during initialization.
BOOTMAGIC_KEY_SKIP	KC_ESC	The Hotkey to ignore saved eeprom configuration.
BOOTMAGIC_KEY_EEPROM_CLEAR	KC_BSPACE	The hotkey to clear the saved eeprom configuration.
BOOTMAGIC_KEY_BOOTLOADER	KC_B	The hotkey to enter the bootloader.
BOOTMAGIC_KEY_DEBUG_ENABLE	KC_D	The hotkey to enable debug mode.
BOOTMAGIC_KEY_DEBUG_MATRIX	KC_X	The hotkey to enable matrix debugging mode.
BOOTMAGIC_KEY_DEBUG_KEYBOARD	KC_K	The hotkey to enable keyboard debugging mode.
BOOTMAGIC_KEY_DEBUG_MOUSE	KC_M	The hotkey to enable mouse debugging mode.
BOOTMAGIC_KEY_SWAP_CONTROL_CAPSLOCK	KC_LCTRL
BOOTMAGIC_KEY_CAPSLOCK_TO_CONTROL	KC_CAPSLOCK
BOOTMAGIC_KEY_SWAP_LALT_LGUI	KC_LALT
BOOTMAGIC_KEY_SWAP_RALT_RGUI	KC_RALT
BOOTMAGIC_KEY_NO_GUI	KC_LGUI
BOOTMAGIC_KEY_SWAP_GRAVE_ESC	KC_GRAVE
BOOTMAGIC_KEY_SWAP_BACKSLASH_BACKSPACE	KC_BSLASH
BOOTMAGIC_HOST_NKRO	KC_N
BOOTMAGIC_KEY_DEFAULT_LAYER_0	KC_0	Hotkey to set Layer 0 as the default layer
BOOTMAGIC_KEY_DEFAULT_LAYER_1	KC_1	Hotkey to set Layer 1 as the default layer
BOOTMAGIC_KEY_DEFAULT_LAYER_2	KC_2	Hotkey to set Layer 2 as the default layer
BOOTMAGIC_KEY_DEFAULT_LAYER_3	KC_3	Hotkey to set Layer 3 as the default layer
BOOTMAGIC_KEY_DEFAULT_LAYER_4	KC_4	Hotkey to set Layer 4 as the default layer
BOOTMAGIC_KEY_DEFAULT_LAYER_5	KC_5	Hotkey to set Layer 5 as the default layer
BOOTMAGIC_KEY_DEFAULT_LAYER_6	KC_6	Hotkey to set Layer 6 as the default layer
BOOTMAGIC_KEY_DEFAULT_LAYER_7	KC_7	Hotkey to set Layer 7 as the default layer