qmk-dactyl-manuform-a/keyboards/ergodox_ez
Drashna Jaelre 86c4c4e91d
Convert clipping variables in rgblight.c to a structure (#7720)
2020-04-29 10:22:28 +02:00
..
keymaps [Keymap] Added Xd75 and viterbi keymaps,refactored my userspace. (#8776) 2020-04-28 02:58:42 -07:00
util
190hotfix.sh
config.h Move Ergodox EZ RGB Light code to custom driver (#7309) 2019-11-14 12:00:51 -08:00
ergodox_ez.c
ergodox_ez.h
info.json
led_i2c.c Convert clipping variables in rgblight.c to a structure (#7720) 2020-04-29 10:22:28 +02:00
matrix.c [Keyboard] Remove i2c write command when reading columns on Ergodox EZ (#8092) 2020-02-07 18:52:02 -08:00
post_config.h Move Ergodox EZ RGB Light code to custom driver (#7309) 2019-11-14 12:00:51 -08:00
readme.md
rules.mk Convert clipping variables in rgblight.c to a structure (#7720) 2020-04-29 10:22:28 +02:00

readme.md

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.