54 lines
2.1 KiB
Markdown
54 lines
2.1 KiB
Markdown
# jj40
|
|
|
|
![jj40](https://ae01.alicdn.com/kf/HTB18bq6bOERMeJjSspiq6zZLFXar.jpg?size=359506&height=562&width=750&hash=663a22d0109e2416ec8f54a7658686da)
|
|
|
|
A compact 40% (12x4) ortholinear keyboard kit made and KPRepublic on AliExpress.
|
|
|
|
Keyboard Maintainer: [QMK Community](https://github.com/qmk)
|
|
Hardware Supported: Atmega32A
|
|
Hardware Availability: [AliExpress](https://www.aliexpress.com/store/product/jj40-Custom-Mechanical-Keyboard-40-PCB-programmed-40-planck-layouts-bface-firmware-gh40/3034003_32828781103.html)
|
|
|
|
Make example for this keyboard (after setting up your build environment):
|
|
|
|
make jj40:default:program
|
|
|
|
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
|
|
|
Note that this is a complete replacement for the firmware, so you won't be
|
|
using Bootmapper Client to change any keyboard settings, since not all the
|
|
USB report options are supported.
|
|
|
|
In addition you may need the AVR toolchain and `bootloadHID` for flashing:
|
|
|
|
```
|
|
$ brew cask install crosspack-avr
|
|
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
|
|
```
|
|
|
|
In order to use the `./program` script, which can reboot the board into
|
|
the bootloader, you'll need Python 2 with PyUSB installed:
|
|
|
|
```
|
|
$ pip install pyusb
|
|
```
|
|
|
|
If you prefer, you can just build it and flash the firmware directly with
|
|
`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it
|
|
in the bootloader:
|
|
|
|
```
|
|
$ make jj40
|
|
$ bootloadHID -r jj40_default.hex
|
|
```
|
|
|
|
## Troubleshooting
|
|
|
|
1. Try plugging the board in while pressing `L_Ctrl`. This will force it
|
|
to boot only the bootloader without loading the firmware. Once this is
|
|
done, just reflash the board with the original firmware.
|
|
2. Sometimes USB hubs can act weird, so try connecting the board directly
|
|
to your computer or plugging/unplugging the USB hub.
|
|
3. If you get an error such as "Resource Unavailable" when attemting to flash
|
|
on Linux, you may want to compile and run `tools/usb_detach.c`. See `tools/README.md`
|
|
for more info.
|