History

Drashna Jaelre a8422cca03 [Keyboard] Tractyl Manuform Updates (#14841 )		2021-10-15 22:09:40 -07:00
..
chconf.h	[Keymap] Drashna's Improve OLEDs and custom Split code (#14063 )	2021-08-21 13:34:44 -07:00
config.h	[Keyboard] Tractyl Manuform Updates (#14841 )	2021-10-15 22:09:40 -07:00
f411.c	[Keyboard] Update Tractyl Manuform config for F411 (#14770 )	2021-10-09 11:31:13 -07:00
f411.h	[Keymap] Drashna's Improve OLEDs and custom Split code (#14063 )	2021-08-21 13:34:44 -07:00
halconf.h	[Keyboard] Updates for Tractyl Manuform config (#14641 )	2021-09-29 09:30:25 -07:00
mcuconf.h	[Keyboard] Update Tractyl Manuform config for F411 (#14770 )	2021-10-09 11:31:13 -07:00
readme.md	[Keyboard] Tractyl Manuform Updates (#14841 )	2021-10-15 22:09:40 -07:00
rules.mk	[Keymap] Drashna's Improve OLEDs and custom Split code (#14063 )	2021-08-21 13:34:44 -07:00

Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball

VBUS mod, using PB10
Split Hand Pin, using PC14
Full Duplex Serial/USART using PA3 and PA4 on USART2
PWM Audio using PB1 and TIM3 and GPT on TIM4
PWM RGB using PA1 TIM2
pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin
8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin
Encoder using PA13 and PA14
SSD1306 OLED display (128x64) using PB8-PB9 on I2C1
Pull-up resistor (22k) on PA10 to fix reset issue.
Pull-up resistor (5.1k) on PA1 for WS2812 LED support, and wire it's VCC to the 5V pin.
Keyboard Maintainer: Drashna Jael're
Hardware Supported: Design files, WeAct BlackPill (F411), PMW3360 Optical Sensor

Make example for this keyboard (after setting up your build environment):

make handwired/tractyl_manuform/5x6_right/f411:default

Flashing example for this keyboard:

make handwired/tractyl_manuform/5x6_right/f411:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.