[Keyboard] Tractyl Manuform Updates (#14841)

master
Drashna Jaelre 2021-10-15 22:09:40 -07:00 committed by GitHub
parent 4db5d85273
commit a8422cca03
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
10 changed files with 101 additions and 8 deletions

View File

@ -17,13 +17,17 @@
#pragma once
#include "tractyl_manuform.h"
#if defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_f411)
# include "f411.h"
#elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_f303)
# include "f303.h"
#elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_teensy2pp)
# include "teensy2pp.h"
#elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_elite_c)
# include "elite_c.h"
#endif
#include "quantum.h"
#define ___ KC_NO

View File

@ -50,3 +50,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
#define OLED_DISPLAY_128X64

View File

@ -0,0 +1,52 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define PRODUCT Tractyl Manuform(5x6) Elite C
// wiring of each half
#define MATRIX_COL_PINS \
{ D4, D7, E6, B4, B5, B7 }
#define MATRIX_ROW_PINS \
{ F7, F6, F5, F4, F1, F0 }
#define DIODE_DIRECTION COL2ROW
// WS2812 RGB LED strip input and number of LEDs
#define RGB_DI_PIN D3
#define RGBLED_NUM 20
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT \
{ 10, 10 }
#define RGBLIGHT_LIMIT_VAL 80
#define OLED_BRIGHTNESS 50
#define AUDIO_PIN C6
/* serial.c configuration for split keyboard */
#define SOFT_SERIAL_PIN D2
#define EE_HANDS
#define ENCODERS_PAD_A \
{ D5 }
#define ENCODERS_PAD_B \
{ C7 }
/* PMW3360 Settings */
#define PMW3360_CS_PIN B6

View File

@ -0,0 +1,19 @@
/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "5x6_right.h"

View File

@ -0,0 +1,11 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
LTO_ENABLE := yes
RGBLIGHT_ENABLE = no
OLED_ENABLE = no
AUDIO_ENABLE = no
ENCODER_ENABLE = no

View File

@ -39,6 +39,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2
#define WS2812_PWM_CHANNEL 2 // default: 2
#define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2
#define WS2812_EXTERNAL_PULLUP
//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy).
#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU.
@ -47,7 +48,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT \
{ 10, 10 }
#define RGBLIGHT_LIMIT_VAL 80
#define RGBLIGHT_LMIT_VAL 80
#define DEBUG_LED_PIN C13

View File

@ -9,7 +9,8 @@
* 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin
* Encoder using PA13 and PA14
* SSD1306 OLED display (128x64) using PB8-PB9 on I2C1
* Pull-up resistor (22k) on A10 to fix reset issue.
* Pull-up resistor (22k) on PA10 to fix reset issue.
* Pull-up resistor (5.1k) on PA1 for WS2812 LED support, and wire it's VCC to the 5V pin.
* Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna)
* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/)

View File

@ -24,13 +24,8 @@
#define TRACKBALL_DPI_OPTIONS { 1200, 1800, 2600, 3400 }
#define RGBLIGHT_MAX_BRIGHTNESS 60
#undef DEBOUNCE
#define DEBOUNCE 10
#define SOLENOID_PIN F1
#define SOLENOID_DEFAULT_DWELL 8
#define OLED_DISPLAY_128X64
#define OLED_BRIGHTNESS 50

View File

@ -348,9 +348,16 @@ void render_kitty(void) {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x06, 0x04, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04, 0x04, 0x07, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}};
// assumes 1 frame prep stage
#ifdef SWAP_HANDS_ENABLE
extern bool swap_hands;
#endif
void animation_phase(void) {
if (tap_toggling) {
# ifdef SWAP_HANDS_ENABLE
if (swap_hands)
#else
if (tap_toggling)
#endif
{
anim_frame_duration = 300;
current_rtogi_frame = (current_rtogi_frame + 1) % RTOGI_FRAMES;
oled_write_raw_P(rtogi[abs((RTOGI_FRAMES - 1) - current_rtogi_frame)], ANIM_SIZE);

View File

@ -35,6 +35,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLED_SPLIT \
{ 10, 10 }
#define RGBLIGHT_LIMIT_VAL 80
#define OLED_BRIGHTNESS 50
#define DEBUG_LED_PIN D6