qmk-dactyl-manuform-a/users/manna-harbour_miryoku/readme.org

91 KiB

Miryoku QMK https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/logos/miryoku-roa-32.png

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/cover/miryoku-kle-cover.png

Miryoku is an ergonomic, minimal, orthogonal, and universal keyboard layout. This is the Miryoku implementation for QMK.

Branches

QMK master

Miryoku QMK is periodically merged upstream into QMK master and it is generally recommended to build directly from QMK master.

QMK master is at https://github.com/qmk/qmk_firmware/tree/master, and the corresponding Miryoku QMK readme is at https://github.com/qmk/qmk_firmware/tree/master/users/manna-harbour_miryoku.

Miryoku QMK development branch

The Miryoku QMK development branch is miryoku and may contain new commits not yet merged into QMK master.

miryoku is at https://github.com/manna-harbour/miryoku_qmk/tree/miryoku, and the corresponding Miryoku QMK readme is at https://github.com/manna-harbour/miryoku_qmk/tree/miryoku/users/manna-harbour_miryoku.

New commits can be seen at the top of the history with commit messages beginning [miryoku]. After the new commits are squashed and merged upstream into QMK master by pull request the miryoku branch is renamed and a new miryoku branch is created from QMK master.

To checkout the miryoku branch in your existing QMK build environment:

git remote add miryoku_qmk git@github.com:manna-harbour/miryoku_qmk.git # if using SSH
git remote add miryoku_qmk https://github.com/manna-harbour/miryoku_qmk.git # if using HTTPS
git fetch miryoku_qmk
git checkout --track miryoku_qmk/miryoku

Layout

General Principles

  • Use layers instead of reaching.
  • Use both hands instead of contortions.
  • Use the home positions as much as possible.
  • Make full use of the thumbs.
  • Avoid unnecessary complication.

Details

  • 5 columns, 3 rows, 3 thumb keys, 2 hands.
  • Can be used on almost any split or non-split ergo or ortho keyboard.
  • Includes all keys found on a US layout TKL keyboard, plus media keys and mouse emulation.
  • Home row is the middle row, home thumb key is the middle thumb key.
  • Maximum 1-u movement from home position for fingers and thumbs, and only along one axis (except for the inner index finger column which is deprioritised compared with the home columns).
  • Dual-function modifiers on home row, mirrored on both hands.
  • Dual-function layer change on thumbs.
  • Layers are designed orthogonally with a single purpose per hand and are accessed by holding a thumb key on the opposite hand.
  • All layers on the same hand are based on the same basic key arrangement.
  • Holding layer change and modifiers on one hand combined with a single key press on the other hand can produce any combination of modifiers and single keys without any finger contortions.
  • Single function mods are also defined on layers on the same hand as the layer change thumb key so layer change and mods can be held in any order or simultaneously without race conditions.
  • As mods are only enabled on the opposite hand, auto-repeat is available on the home row on layers for use with cursor and mouse keys.
  • Tap-hold auto-repeat is disabled to permit faster tap-hold switching on thumbs, but thumb tap keys are mirrored onto some layers for use with auto-repeat. On other layers thumb keys are redefined with important functions for that layer.
  • Auto Shift for numbers and symbols.

Layers

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-reference.png

The layers are maintained in tables. U_NP indicates the key is not present and is used to fill in the table around the thumb keys. The grid arrangement of the tables does not imply a particular physical layout.

Basic keycodes are entered without the KC_ prefix. Symbols can be entered as-is, except for '-' (MINS), '.' (DOT), '|' (PIPE), and '"' (DQUO). Empty cells are unused.

The base layer is maintained as separate tables for tap alphas, tap thumbs, and hold. Other layers are specified as a single hand including thumbs. Tables are combined to produce the keymap for each layer.

Mods (and reset) will be available on sub layers on the same hand as the layer change thumb key. Unknown names are considered to be layer names.

Base

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-base.png

The base layer alphas are Colemak Mod-DH. Dot, comma, slash, and apostrophe are included with the alphas. The primary, secondary, and tertiary thumb keys are backspace, enter, delete on the right and space, tab, escape on the left.

Alternative alpha arrangements are also available.

Tap
Alphas
Q W F P B J L U Y '
A R S T G M N E I O
Z X C D V K H , DOT /
Thumbs
U_NP U_NP ESC SPC TAB ENT BSPC DEL U_NP U_NP
Hold
RESET RESET
LGUI LALT LCTL LSFT LSFT LCTL LALT LGUI
BUTTON ALGR ALGR BUTTON
U_NP U_NP MEDIA NAV MOUSE SYM NUM FUN U_NP U_NP
Nav

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-nav.png

Primary right-hand layer (left home thumb) is navigation and editing. Cursor keys are on the home position, line and page movement below, clipboard above, caps lock and insert on the inner column. Thumb keys are duplicated from the base layer to avoid having to layer change mid edit and to enable auto-repeat.

Alternative clipboard key mappings and navigation key arrangements are available.

U_RDO U_PST U_CPY U_CUT U_UND
CAPS LEFT DOWN UP RGHT
INS HOME PGDN PGUP END
ENT BSPC DEL U_NP U_NP
Mouse

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-mouse.png

Secondary right-hand layer is mouse emulation. Mouse movement mirrors cursor navigation on home and wheel mirrors line / page movement below. Buttons are on the thumbs (L, M, R). Mouse movement, click, and drag, with modifiers, can be performed from the home position. Clipboard keys are duplicated from the Nav layer.

U_RDO U_PST U_CPY U_CUT U_UND
MS_L MS_D MS_U MS_R
WH_L WH_D WH_U WH_R
BTN1 BTN3 BTN2 U_NP U_NP
Button

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-button.png

Provides mouse buttons, mods, and clipboard keys for use with integrated or external pointing devices, used with either hand. The layer is available for automatic activation depending on hardware and configuration. It can also be activated manually by holding a bottom row pinkie key (however GUI and Undo will be unavailable).

U_UND U_CUT U_CPY U_PST U_RDO U_RDO U_PST U_CPY U_CUT U_UND
LGUI LALT LCTL LSFT LSFT LCTL LALT LGUI
U_UND U_CUT U_CPY U_PST U_RDO U_RDO U_PST U_CPY U_CUT U_UND
U_NP U_NP BTN2 BTN3 BTN1 BTN1 BTN3 BTN2 U_NP U_NP
Media

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-media.png

Tertiary right-hand layer is media control, with volume up / down and next / prev mirroring the navigation keys. Pause, stop and mute are on thumbs. RGB control is on the top row (combine with shift to invert). Unused keys are available for other related functions.

RGB_TOG RGB_MOD RGB_HUI RGB_SAI RGB_VAI
MPRV VOLD VOLU MNXT
MSTP MPLY MUTE U_NP U_NP
Num

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-num.png

Primary left-hand layer (right home thumb) is numerals and symbols. Numerals are in the standard numpad locations with symbols in the remaining positions. Dot is duplicated from the base layer.

[ 7 8 9 ]
; 4 5 6 =
` 1 2 3 \
U_NP U_NP DOT 0 MINS
Sym

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-sym.png

Secondary left-hand layer has shifted symbols in the same locations to reduce chording when using mods with shifted symbols. Open parenthesis is duplicated next to close parenthesis.

{ & * ( }
: $ % ^ +
~ ! @ # PIPE
U_NP U_NP ( ) _
Fun

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-fun.png

Tertiary left-hand layer has function keys mirroring the numerals on the primary layer with extras on the pinkie column, plus system keys on the inner column. App (menu) is on the tertiary thumb key and other thumb keys are duplicated from the base layer to enable auto-repeat.

F12 F7 F8 F9 PSCR
F11 F4 F5 F6 SLCK
F10 F1 F2 F3 PAUS
U_NP U_NP APP SPC TAB
Alternative Layouts

The defaults are recommended, but alternative layouts are provided to accommodate existing muscle memory and platform differences.

Alphas

To select, append the corresponding option to the make command line when building, e.g. MIRYOKU_ALPHAS=QWERTY.

AZERTY

MIRYOKU_ALPHAS=AZERTY

A Z E R T Y U I O P
Q S D F G H J K L M
W X C V B N , DOT / '
Colemak

MIRYOKU_ALPHAS=COLEMAK

Q W F P G J L U Y '
A R S T D H N E I O
Z X C V B K M , DOT /
Colemak Mod-DHk

MIRYOKU_ALPHAS=COLEMAKDHK

Q W F P B J L U Y '
A R S T G K N E I O
Z X C D V M H , DOT /
Dvorak

MIRYOKU_ALPHAS=DVORAK

' , DOT P Y F G C R L
A O E U I D H T N S
/ Q J K X B M W V Z
Halmak

MIRYOKU_ALPHAS=HALMAK

W L R B Z ' Q U D J
S H N T , DOT A E O I
F M V C / G P X K Y
Workman

MIRYOKU_ALPHAS=WORKMAN

Q D R W B J F U P '
A S H T G Y N E O I
Z X M C V K L , DOT /
QWERTY

MIRYOKU_ALPHAS=QWERTY

Q W E R T Y U I O P
A S D F G H J K L '
Z X C V B N M , DOT /
QWERTZ

MIRYOKU_ALPHAS=QWERTZ

Q W E R T Z U I O P
A S D F G H J K L '
Y X C V B N M , DOT /
Nav
vi-Style

To select, append MIRYOKU_NAV=VI to the make command line when building. Not available with MIRYOKU_LAYERS=FLIP.

Nav
U_RDO U_PST U_CPY U_CUT U_UND
LEFT DOWN UP RGHT CAPS
HOME PGDN PGUP END INS
ENT BSPC DEL U_NP U_NP
Mouse
U_RDO U_PST U_CPY U_CUT U_UND
MS_L MS_D MS_U MS_R
WH_L WH_D WH_U WH_R
BTN1 BTN3 BTN2 U_NP U_NP
Media
RGB_TOG RGB_MOD RGB_HUI RGB_SAI RGB_VAI
MPRV VOLD VOLU MNXT
MSTP MPLY MUTE U_NP U_NP
Inverted-T

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-reference-flip-invertedt.png

To select, append MIRYOKU_NAV=INVERTEDT to the make command line when building. Only available with MIRYOKU_LAYERS=FLIP.

Nav
PGUP HOME UP END INS
PGDN LEFT DOWN RGHT CAPS
U_UND U_CUT U_CPY U_PST U_RDO
U_NP U_NP DEL BSPC ENT
Mouse
WH_U WH_L MS_U WH_R
WH_D MS_L MS_D MS_R
U_UND U_CUT U_CPY U_PST U_RDO
U_NP U_NP BTN2 BTN3 BTN1
Media
VOLU
MPRV VOLD MNXT
RGB_MOD RGB_HUI RGB_SAI RGB_VAI RGB_TOG
U_NP U_NP MUTE MPLY MSTP
Clipboard

Keycodes are translated according to the following tables.

By default, the main clipboard keys (cut, copy, and paste) use the CUA bindings and should work in general unix and windows applications, emacs, and terminal emulators. The additional keys (undo, redo) usually require rebinding in the application.

To select, append the corresponding option to the make command line when building, e.g. MIRYOKU_CLIPBOARD=WIN.

Default
U_RDO AGIN
U_PST S(KC_INS)
U_CPY C(KC_INS)
U_CUT S(KC_DEL)
U_UND UNDO
Fun Cluster

MIRYOKU_CLIPBOARD=FUN

U_RDO AGIN
U_PST PSTE
U_CPY COPY
U_CUT CUT
U_UND UNDO
Mac

MIRYOKU_CLIPBOARD=MAC

U_RDO SCMD(KC_Z)
U_PST LCMD(KC_V)
U_CPY LCMD(KC_C)
U_CUT LCMD(KC_X)
U_UND LCMD(KC_Z)
Windows

MIRYOKU_CLIPBOARD=WIN

U_RDO C(KC_Y)
U_PST C(KC_V)
U_CPY C(KC_C)
U_CUT C(KC_X)
U_UND C(KC_Z)
Layers
Flip

Flip base layer thumb keys and sub layers between right and left hands.

To select, append MIRYOKU_LAYERS=FLIP to the make command line when building.

Thumbs
U_NP U_NP DEL BSPC ENT TAB SPC ESC U_NP U_NP
Hold
RESET RESET
LGUI LALT LCTL LSFT LSFT LCTL LALT LGUI
BUTTON ALGR ALGR BUTTON
U_NP U_NP FUN NUM SYM MOUSE NAV MEDIA U_NP U_NP
Nav
HOME PGDN PGUP END INS
LEFT DOWN UP RGHT CAPS
U_UND U_CUT U_CPY U_PST U_RDO
U_NP U_NP DEL BSPC ENT
Mouse
WH_L WH_D WH_U WH_R
MS_L MS_D MS_U MS_R
U_UND U_CUT U_CPY U_PST U_RDO
U_NP U_NP BTN2 BTN3 BTN1
Media
RGB_MOD RGB_HUI RGB_SAI RGB_VAI RGB_TOG
MPRV VOLD VOLU MNXT
U_NP U_NP MUTE MPLY MSTP
Num
[ 7 8 9 ]
= 4 5 6 ;
\ 1 2 3 `
MINS 0 DOT U_NP U_NP
Sym
{ & * ( }
+ $ % ^ :
PIPE ! @ # ~
_ ( ) U_NP U_NP
Fun
PSCR F7 F8 F9 F12
SLCK F4 F5 F6 F11
PAUS F1 F2 F3 F10
TAB SPC APP U_NP U_NP
COMMENT Templates
U_NP U_NP U_NP U_NP

Duplicate base layer tap keys on thumbs rather than trans to enable auto-repeat.

ENT BSPC DEL U_NP U_NP
U_NP U_NP ESC SPC TAB

Code Generation

The layout is maintained in emacs org-mode tables and converted to QMK keymap data structures using embedded python scripts.

Table Conversion Scripts

table-layout-taphold

Produce base layer from separate tap and hold tables.

width = 19
mods_dict = dict.fromkeys(mods_table[0])
nonkc_tuple = tuple(nonkc_table[0])
symbol_names_dict = {}
for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
  symbol_names_dict[symbol] = name
  symbol_names_dict[shifted_symbol] = shifted_name
results = ''
for tap_row, hold_row in zip(alphas_table + thumbs_table, hold_table):
  results += '    '
  for tap, hold in zip(tap_row, hold_row):
    if tap == '':
      code = 'U_NU'
    elif tap in symbol_names_dict:
      code = symbol_names_dict[tap]
    else:
      code = tap
    if not str(code).startswith(nonkc_tuple):
      code = 'KC_' + str(code)
    if hold in mods_dict:
      code = str(hold) + '_T(' + code + ')'
    elif hold != '' and hold != 'U_NP' and hold != 'RESET':
      code = 'LT(' + str(hold) + ', ' + code + ')'
    results += (code + ', ').ljust(width)
  results = results.rstrip(' ') + '\n'
results = results.rstrip('\n, ')
return results
    KC_Q,              KC_W,              KC_F,              KC_P,              KC_B,              KC_J,              KC_L,              KC_U,              KC_Y,              KC_QUOT,
    LGUI_T(KC_A),      LALT_T(KC_R),      LCTL_T(KC_S),      LSFT_T(KC_T),      KC_G,              KC_M,              LSFT_T(KC_N),      LCTL_T(KC_E),      LALT_T(KC_I),      LGUI_T(KC_O),
    KC_Z,              ALGR_T(KC_X),      KC_C,              KC_D,              KC_V,              KC_K,              KC_H,              KC_COMM,           ALGR_T(KC_DOT),    KC_SLSH,
    U_NP,              U_NP,              LT(MEDIA, KC_ESC), LT(NAV, KC_SPC),   LT(MOUSE, KC_TAB), LT(SYM, KC_ENT),   LT(NUM, KC_BSPC),  LT(FUN, KC_DEL),   U_NP,              U_NP
table-layout-half

Produce sub layers given layer name and corresponding table for single hand and incorporating mods and reset from base layer. Layer names must end with 'R' or 'L'. A layer with shifted symbols can also be generated.

width = 9
mods_dict = dict.fromkeys(mods_table[0])
nonkc_tuple = tuple(nonkc_table[0])
symbol_names_dict = {}
shifted_symbol_names_dict = {}
for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
  symbol_names_dict[symbol] = name
  symbol_names_dict[shifted_symbol] = shifted_name
  shifted_symbol_names_dict[symbol] = shifted_name
length = len(half_table[0])
results = ''
for half_row, hold_row in zip(half_table, hold_table):
  results += '    '
  hold_row_l, hold_row_r = hold_row[:length], hold_row[length:]
  for lr, hold_row_lr in ('l', hold_row_l), ('r', hold_row_r):
    if lr == mode:
      for half in half_row:
        if half == '':
          code = 'U_NU'
        elif shift == "true" and half in shifted_symbol_names_dict:
          code = shifted_symbol_names_dict[half]
        elif half in symbol_names_dict:
          code = symbol_names_dict[half]
        else:
          code = half
        if not str(code).startswith(nonkc_tuple):
          code = 'KC_' + str(code)
        results += (str(code) + ', ').ljust(width)
    else:
      for hold in hold_row_lr:
        if hold == '' or hold != 'U_NP' and hold != 'RESET' and hold not in mods_dict:
          code = 'U_NA'
        else:
          code = hold
        if not str(code).startswith(nonkc_tuple):
          code = 'KC_' + str(code)
        results += (str(code) + ', ').ljust(width)
  results = results.rstrip(' ') + '\n'
results = results.rstrip('\n, ')
return results
    RESET,   U_NA,    U_NA,    U_NA,    U_NA,    U_RDO,   U_PST,   U_CPY,   U_CUT,   U_UND,
    KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, U_NA,    KC_CAPS, KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT,
    U_NA,    KC_ALGR, U_NA,    U_NA,    U_NA,    KC_INS,  KC_HOME, KC_PGDN, KC_PGUP, KC_END,
    U_NP,    U_NP,    U_NA,    U_NA,    U_NA,    KC_ENT,  KC_BSPC, KC_DEL,  U_NP,    U_NP
table-layout-full

Produce full layer from single table. Fill for unused keys is configurable.

width = 9
symbol_names_dict = {}
nonkc_tuple = tuple(nonkc_table[0])
for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
  symbol_names_dict[symbol] = name
  symbol_names_dict[shifted_symbol] = shifted_name
results = ''
for row in table:
  results += '    '
  for key in row:
    if key == '':
      code = fill
    elif key in symbol_names_dict:
      code = symbol_names_dict[key]
    else:
      code = key
    if not str(code).startswith(nonkc_tuple):
      code = 'KC_' + str(code)
    results += (code + ', ').ljust(width)
  results = results.rstrip(' ') + '\n'
results = results.rstrip('\n, ')
return results
    U_UND,   U_CUT,   U_CPY,   U_PST,   U_RDO,   U_RDO,   U_PST,   U_CPY,   U_CUT,   U_UND,
    KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_TRNS, KC_TRNS, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI,
    U_UND,   U_CUT,   U_CPY,   U_PST,   U_RDO,   U_RDO,   U_PST,   U_CPY,   U_CUT,   U_UND,
    U_NP,    U_NP,    KC_BTN2, KC_BTN3, KC_BTN1, KC_BTN1, KC_BTN3, KC_BTN2, U_NP,    U_NP
table-enums

Produce layer enums from layer names in hold table.

mods_dict = dict.fromkeys(mods_table[0])
layers = [ 'BASE', 'BUTTON' ]
for hold_row in hold_table:
  for hold in hold_row:
    if hold not in mods_dict and hold != '' and hold != 'U_NP' and hold != 'RESET' and hold not in layers:
      layers.append(hold)
results = 'enum layers { ' + ', '.join(layers) + ' };'
return results
enum layers { BASE, BUTTON, MEDIA, NAV, MOUSE, SYM, NUM, FUN };
table-keycode-mappings

Produce keycode mappings according to the provided table.

nonkc_tuple = tuple(nonkc_table[0])
symbol_names_dict = {}
for symbol, name, shifted_symbol, shifted_name in symbol_names_table:
  symbol_names_dict[symbol] = name
  symbol_names_dict[shifted_symbol] = shifted_name
results = ''
for f,t in table:
  if t == '':
    code = 'U_NU'
  elif t in symbol_names_dict:
    code = symbol_names_dict[t]
  else:
    code = t
  if not str(code).startswith(nonkc_tuple):
    code = 'KC_' + str(code)
  results += '#define ' + f + ' ' + code + '\n'
return results
#define U_RDO KC_AGIN
#define U_PST S(KC_INS)
#define U_CPY C(KC_INS)
#define U_CUT S(KC_DEL)
#define U_UND KC_UNDO
COMMENT python-version

C-c C-c in code block to update

import sys
return sys.version
3.9.4 (default, Apr  9 2021, 01:15:05) 
[GCC 5.4.0 20160609]

Data

symbol-names

Symbol, name, and shifted symbol mappings for use in tables.

` GRV ~ TILD
"-" MINS _ UNDS
= EQL + PLUS
[ LBRC { LCBR
] RBRC } RCBR
\ BSLS PIPE PIPE
; SCLN : COLN
' QUOT DQUO DQUO
, COMM < LT
"." DOT > GT
/ SLSH ? QUES
1 1 ! EXLM
2 2 @ AT
3 3 # HASH
4 4 $ DLR
5 5 % PERC
6 6 ^ CIRC
7 7 & AMPR
8 8 * ASTR
9 9 ( LPRN
0 0 ) RPRN
mods

Modifiers usable in hold table. Need to have the same name for KC_ and _T versions.

LSFT LCTL LALT LGUI ALGR
nonkc

Keycodes that match any of these prefixes will not have KC_ automatically prepended.

U_ RGB_ RESET S( C( SCMD( LCMD(
header

Header for tangled files.

Copyright 2019 Manna Harbour
https://github.com/manna-harbour/miryoku
generated -*- buffer-read-only: t -*-
license-qmk

License for tangled QMK C source files.

// This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>.

Subset Mapping

The keymap, build options, and configuration are shared between keyboards. The layout is mapped onto keyboards with different physical layouts as a subset without code duplication using the QMK userspace feature and C macros.

Userspace

The keymap is defined for LAYOUT_miryoku which is 10x4, with the outer 2 positions on the bottom row unused and the rest of the bottom row being the thumb keys.

users/manna-harbour_miryoku/rules.mk

Build options. Automatically included.

# <<header>>

MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
AUTO_SHIFT_ENABLE = yes # Auto Shift

SRC += manna-harbour_miryoku.c # keymap

# alternative layouts:

# alphas
ifneq ($(strip $(MIRYOKU_ALPHAS)),)
  OPT_DEFS += -DMIRYOKU_ALPHAS_$(MIRYOKU_ALPHAS)
endif

# nav
ifneq ($(strip $(MIRYOKU_NAV)),)
  OPT_DEFS += -DMIRYOKU_NAV_$(MIRYOKU_NAV)
endif

# clipboard
ifneq ($(strip $(MIRYOKU_CLIPBOARD)),)
  OPT_DEFS += -DMIRYOKU_CLIPBOARD_$(MIRYOKU_CLIPBOARD)
endif

# layers
ifneq ($(strip $(MIRYOKU_LAYERS)),)
  OPT_DEFS += -DMIRYOKU_LAYERS_$(MIRYOKU_LAYERS)
endif

# subset mappings
ifneq ($(strip $(MIRYOKU_MAPPING)),)
  OPT_DEFS += -DMIRYOKU_MAPPING_$(MIRYOKU_MAPPING)
endif
users/manna-harbour_miryoku/config.h

Config options. Automatically included.

// <<header>>

<<license-qmk>>

#pragma once

// default but used in macros
#undef TAPPING_TERM
#define TAPPING_TERM 200

// Prevent normal rollover on alphas from accidentally triggering mods.
#define IGNORE_MOD_TAP_INTERRUPT

// Enable rapid switch from tap to hold, disables double tap hold auto-repeat.
#define TAPPING_FORCE_HOLD

// Auto Shift
#define NO_AUTO_SHIFT_ALPHA
#define AUTO_SHIFT_TIMEOUT TAPPING_TERM
#define AUTO_SHIFT_NO_SETUP

// Recommended for heavy chording.
#define QMK_KEYS_PER_SCAN 4

// Mouse key speed and acceleration.
#undef MOUSEKEY_DELAY
#define MOUSEKEY_DELAY          0
#undef MOUSEKEY_INTERVAL
#define MOUSEKEY_INTERVAL       16
#undef MOUSEKEY_WHEEL_DELAY
#define MOUSEKEY_WHEEL_DELAY    0
#undef MOUSEKEY_MAX_SPEED
#define MOUSEKEY_MAX_SPEED      6
#undef MOUSEKEY_TIME_TO_MAX
#define MOUSEKEY_TIME_TO_MAX    64
users/manna-harbour_miryoku/manna-harbour_miryoku.h

Keymap-related definitions. Included from manna-harbour_miryoku.c. Can be included from keymap or layout keymap.c if needed.

// <<header>>

<<license-qmk>>

#pragma once

#include QMK_KEYBOARD_H

#define U_NP KC_NO // key is not present
#define U_NA KC_NO // present but not available for use
#define U_NU KC_NO // available but not used

<<table-enums()>>

#if defined MIRYOKU_CLIPBOARD_FUN
<<table-keycode-mappings(table=clipboard-fun)>>
#elif defined MIRYOKU_CLIPBOARD_MAC
<<table-keycode-mappings(table=clipboard-mac)>>
#elif defined MIRYOKU_CLIPBOARD_WIN
<<table-keycode-mappings(table=clipboard-win)>>
#else
<<table-keycode-mappings(table=clipboard)>>
#endif
users/manna-harbour_miryoku/manna-harbour_miryoku.c

Contains the keymap. Added from rules.mk.

// <<header>>

<<license-qmk>>

#include "manna-harbour_miryoku.h"

const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
#if defined MIRYOKU_LAYERS_FLIP
  [BASE] = LAYOUT_miryoku(
  #if defined MIRYOKU_ALPHAS_AZERTY
<<table-layout-taphold(alphas_table=azerty, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_COLEMAK
<<table-layout-taphold(alphas_table=colemak, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_COLEMAKDHK
<<table-layout-taphold(alphas_table=colemakdhk, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_DVORAK
<<table-layout-taphold(alphas_table=dvorak, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_HALMAK
<<table-layout-taphold(alphas_table=halmak, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_WORKMAN
<<table-layout-taphold(alphas_table=workman, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_QWERTY
<<table-layout-taphold(alphas_table=qwerty, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #elif defined MIRYOKU_ALPHAS_QWERTZ
<<table-layout-taphold(alphas_table=qwertz, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #else
<<table-layout-taphold(alphas_table=colemakdh, thumbs_table=thumbs-flip, hold_table=hold-flip)>>
  #endif
  ),
  #if defined MIRYOKU_NAV_INVERTEDT
  [NAV] = LAYOUT_miryoku(
<<table-layout-half(half_table=nav-l-invertedt, mode="l", hold_table=hold-flip)>>
  ),
  [MOUSE] = LAYOUT_miryoku(
<<table-layout-half(half_table=mouse-l-invertedt, mode="l", hold_table=hold-flip)>>
  ),
  [MEDIA] = LAYOUT_miryoku(
<<table-layout-half(half_table=media-l-invertedt, mode="l", hold_table=hold-flip)>>
  ),
  #else
  [NAV] = LAYOUT_miryoku(
<<table-layout-half(half_table=nav-l, mode="l", hold_table=hold-flip)>>
  ),
  [MOUSE] = LAYOUT_miryoku(
<<table-layout-half(half_table=mouse-l, mode="l", hold_table=hold-flip)>>
  ),
  [MEDIA] = LAYOUT_miryoku(
<<table-layout-half(half_table=media-l, mode="l", hold_table=hold-flip)>>
  ),
  #endif
  [NUM] = LAYOUT_miryoku(
<<table-layout-half(half_table=num-r, mode="r", hold_table=hold-flip)>>
  ),
  [SYM] = LAYOUT_miryoku(
<<table-layout-half(half_table=sym-r, mode="r", hold_table=hold-flip)>>
  ),
  [FUN] = LAYOUT_miryoku(
<<table-layout-half(half_table=fun-r, mode="r", hold_table=hold-flip)>>
  ),
#else
  [BASE] = LAYOUT_miryoku(
  #if defined MIRYOKU_ALPHAS_AZERTY
<<table-layout-taphold(alphas_table=azerty)>>
  #elif defined MIRYOKU_ALPHAS_COLEMAK
<<table-layout-taphold(alphas_table=colemak)>>
  #elif defined MIRYOKU_ALPHAS_COLEMAKDHK
<<table-layout-taphold(alphas_table=colemakdhk)>>
  #elif defined MIRYOKU_ALPHAS_DVORAK
<<table-layout-taphold(alphas_table=dvorak)>>
  #elif defined MIRYOKU_ALPHAS_HALMAK
<<table-layout-taphold(alphas_table=halmak)>>
  #elif defined MIRYOKU_ALPHAS_WORKMAN
<<table-layout-taphold(alphas_table=workman)>>
  #elif defined MIRYOKU_ALPHAS_QWERTY
<<table-layout-taphold(alphas_table=qwerty)>>
  #elif defined MIRYOKU_ALPHAS_QWERTZ
<<table-layout-taphold(alphas_table=qwertz)>>
  #else
<<table-layout-taphold(alphas_table=colemakdh)>>
  #endif
  ),
  #if defined MIRYOKU_NAV_VI
  [NAV] = LAYOUT_miryoku(
<<table-layout-half(half_table=nav-r-vi, mode="r")>>
  ),
  [MOUSE] = LAYOUT_miryoku(
<<table-layout-half(half_table=mouse-r-vi, mode="r")>>
  ),
  [MEDIA] = LAYOUT_miryoku(
<<table-layout-half(half_table=media-r-vi, mode="r")>>
  ),
  #else
  [NAV] = LAYOUT_miryoku(
<<table-layout-half(half_table=nav-r, mode="r")>>
  ),
  [MOUSE] = LAYOUT_miryoku(
<<table-layout-half(half_table=mouse-r, mode="r")>>
  ),
  [MEDIA] = LAYOUT_miryoku(
<<table-layout-half(half_table=media-r, mode="r")>>
  ),
  #endif
  [NUM] = LAYOUT_miryoku(
<<table-layout-half(half_table=num-l, mode="l")>>
  ),
  [SYM] = LAYOUT_miryoku(
<<table-layout-half(half_table=sym-l, mode="l")>>
  ),
  [FUN] = LAYOUT_miryoku(
<<table-layout-half(half_table=fun-l, mode="l")>>
  ),
#endif
  [BUTTON] = LAYOUT_miryoku(
<<table-layout-full(table=button)>>
  )
};

Layouts

To use the keymap on a keyboard supporting the layouts feature, LAYOUT_miryoku is defined as a macro mapping onto the layout's own LAYOUT macro, leaving the unused keys as KC_NO.

For keyboards supporting multiple layouts for which subset mappings are available, select the layout with FORCE_LAYOUT in the make command line when building. E.g.:

make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=planck_mit # planck_mit
make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=ortho_4x12 # ortho_4x12
60_ansi

An angled ortho split layout is mapped onto the row-staggered keyboard. The rows are moved up to better position the thumb keys, the hands are separated as much as possible, and the left hand column angle is reversed to reduce ulnar deviation of the wrists.

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-60_ansi.png

An alternative subset mapping is also provided without reverse column angle. To select this mapping, append MIRYOKU_MAPPING=NOREVERSEANGLE to the make command line when building.

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-60_ansi-noreverseangle.png

Another alternative subset mapping is provided mapping only the 3x10 alphas, plus spacebar for space / Nav, with the remainder being the default 60_ansi keymap with semicolon in place of quote. To select this mapping, append MIRYOKU_MAPPING=LITE to the make command line when building.

Keyboards supporting this layout: alps64, amj60, bakeneko60, bm60poker, bm60rgb, do60, dp60, dz60, facew, gskt00, infinity60, jm60, kc60, kc60se, ok60, org60, paladin64, panc60, reviung61, smk60, v60_type_r, yd60mq, 1upkeyboards/1up60hse, 1upkeyboards/1up60rgb, 40percentclub/luddite, acheron/keebspcb, acheron/lasgweloth, ai03/polaris, akegata_denki/device_one, atxkb/1894, bioi/g60ble, bt66tech/bt66tech60, cannonkeys/an_c, cannonkeys/instant60, cannonkeys/practice60, clawsome/coupe, dm9records/tartan, duck/eagle_viper, evyd13/plain60, exclusive/e6_rgb, gh60/revc, gh60/satan, gh60/v1p3, handwired/xealousbrown, hineybush/h60, hs60/v1, keebio/wtf60, noxary/260, playkbtw/pk60, ryloo_studio/m0110, thevankeyboards/bananasplit, wilba_tech/zeal60, xd60/rev2, xd60/rev3, cannonkeys/db60/hotswap, cannonkeys/db60/j02, cannonkeys/db60/rev2, exclusive/e6v2/le, exclusive/e6v2/oe, foxlab/leaf60/universal, handwired/co60/rev1, handwired/co60/rev7, handwired/swiftrax/nodu, hs60/v2/ansi, inett_studio/sqx/universal, melgeek/mj61/rev1, melgeek/mj61/rev2, melgeek/mj63/rev1, melgeek/mj63/rev2, sentraq/s60_x/default, sentraq/s60_x/rgb.

Example build command lines:

make dz60:manna-harbour_miryoku:flash # dz60
make dz60:manna-harbour_miryoku:flash MIRYOKU_MAPPING=NOREVERSEANGLE  # dz60, without reverse column angle
make dz60:manna-harbour_miryoku:flash MIRYOKU_MAPPING=LITE  # dz60, with lite mapping
layouts/community/60_ansi/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#if defined MIRYOKU_MAPPING_NOREVERSEANGLE
  #define LAYOUT_miryoku(\
K00,  K01,  K02,  K03,  K04,                    K05,  K06,  K07,  K08,  K09,\
K10,  K11,  K12,  K13,  K14,                    K15,  K16,  K17,  K18,  K19,\
K20,  K21,  K22,  K23,  K24,                    K25,  K26,  K27,  K28,  K29,\
N30,  N31,  K32,  K33,  K34,                    K35,  K36,  K37,  N38,  N39\
)\
LAYOUT_60_ansi(\
K00,  K01,  K02,  K03,  K04,  XXX,  XXX,  XXX,  K05,  K06,  K07,  K08,  K09,  XXX,\
   K10,  K11,  K12,  K13,  K14,  XXX,  XXX,  XXX,  K15,  K16,  K17,  K18,  K19,  XXX,\
     K20,  K21,  K22,  K23,  K24,  XXX,  XXX,  XXX,  K25,  K26,  K27,  K28,  K29,\
  XXX,        K32,  K33,  K34,  XXX,  XXX,  XXX,  XXX,  K35,  K36,  K37,  XXX,\
  XXX,  XXX,  XXX,              XXX,              XXX,  XXX,        XXX,  XXX\
)
#elif defined MIRYOKU_MAPPING_LITE
  #if defined MIRYOKU_LAYERS_FLIP
    #define LAYOUT_miryoku( \
         K00,     K01,     K02,     K03,     K04,     K05,     K06,     K07,     K08,     K09, \
         K10,     K11,     K12,     K13,     K14,     K15,     K16,     K17,     K18,     K19, \
         K20,     K21,     K22,     K23,     K24,     K25,     K26,     K27,     K28,     K29, \
         N30,     N31,     K32,     K33,     K34,     K35,     K36,     K37,     N38,     N39 \
) \
LAYOUT_60_ansi( \
KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
KC_TAB,  K00,     K01,     K02,     K03,     K04,     K05,     K06,     K07,     K08,     K09,     KC_LBRC, KC_RBRC, KC_BSLS, \
KC_CAPS, K10,     K11,     K12,     K13,     K14,     K15,     K16,     K17,     K18,     K19,     KC_SCLN, KC_ENT, \
KC_LSFT, K20,     K21,     K22,     K23,     K24,     K25,     K26,     K27,     K28,     K29,     KC_RSFT, \
KC_LCTL, KC_LGUI, KC_LALT,                            K36,                                KC_RALT, KC_RGUI, KC_APP,  KC_RCTL \
)
  #else
    #define LAYOUT_miryoku( \
         K00,     K01,     K02,     K03,     K04,     K05,     K06,     K07,     K08,     K09, \
         K10,     K11,     K12,     K13,     K14,     K15,     K16,     K17,     K18,     K19, \
         K20,     K21,     K22,     K23,     K24,     K25,     K26,     K27,     K28,     K29, \
         N30,     N31,     K32,     K33,     K34,     K35,     K36,     K37,     N38,     N39 \
) \
LAYOUT_60_ansi( \
KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSPC, \
KC_TAB,  K00,     K01,     K02,     K03,     K04,     K05,     K06,     K07,     K08,     K09,     KC_LBRC, KC_RBRC, KC_BSLS, \
KC_CAPS, K10,     K11,     K12,     K13,     K14,     K15,     K16,     K17,     K18,     K19,     KC_SCLN, KC_ENT, \
KC_LSFT, K20,     K21,     K22,     K23,     K24,     K25,     K26,     K27,     K28,     K29,     KC_RSFT, \
KC_LCTL, KC_LGUI, KC_LALT,                            K33,                                         KC_RALT, KC_RGUI, KC_APP,  KC_RCTL \
)
  #endif
#else
  #define LAYOUT_miryoku(\
            K00,  K01,  K02,  K03,  K04,        K05,  K06,  K07,  K08,  K09,\
            K10,  K11,  K12,  K13,  K14,        K15,  K16,  K17,  K18,  K19,\
            K20,  K21,  K22,  K23,  K24,        K25,  K26,  K27,  K28,  K29,\
            N30,  N31,  K32,  K33,  K34,        K35,  K36,  K37,  N38,  N39\
)\
LAYOUT_60_ansi(\
XXX,  XXX,  K00,  K01,  K02,  K03,  K04,  XXX,  K05,  K06,  K07,  K08,  K09,  XXX,\
   XXX,  K10,  K11,  K12,  K13,  K14,  XXX,  XXX,  K15,  K16,  K17,  K18,  K19,  XXX,\
     K20,  K21,  K22,  K23,  K24,  XXX,  XXX,  XXX,  K25,  K26,  K27,  K28,  K29,\
  XXX,        XXX,  K32,  K33,  K34,  XXX,  XXX,  XXX,  K35,  K36,  K37,  XXX,\
  XXX,  XXX,  XXX,              XXX,              XXX,  XXX,        XXX,  XXX\
)
#endif
layouts/community/60_ansi/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
ergodox

For the ergodox layout, the main 5x3 alphas are used as usual. The primary and secondary thumb keys are the inner and outer 2u thumb keys and the tertiary thumb key is the innermost key of the partial bottom row. The remaining keys are unused.

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-ergodox.png

Keyboards supporting this layout: ergodone, ergodox_ez, ergodox_infinity, hotdox.

Example build command lines:

make ergodox_infinity:manna-harbour_miryoku:flash # ergodox_infinity
make ergodox_ez:manna-harbour_miryoku:flash # ergodox_ez
layouts/community/ergodox/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39\
)\
LAYOUT_ergodox_pretty(\
XXX, XXX, XXX, XXX, XXX, XXX, XXX,      XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
XXX, K00, K01, K02, K03, K04, XXX,      XXX, K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24, XXX,      XXX, K25, K26, K27, K28, K29, XXX,\
XXX, XXX, XXX, XXX, K32,                          K37, XXX, XXX, XXX, XXX,\
                         XXX, XXX,      XXX, XXX,\
                              XXX,      XXX,\
                    K33, K34, XXX,      XXX, K35, K36\
)
layouts/community/ergodox/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
ortho_4x10

An alternative with 180 degree rotation is also provided to enable the USB cable to be relocated for use with laptops. To select this mapping, append MIRYOKU_MAPPING=ROTATE to the make command line when building.

Keyboards supporting this layout: newgame40, nimrod, marksard/rhymestone, pabile/p40.

Example build command lines:

make marksard/rhymestone:manna-harbour_miryoku:flash # marksard/rhymestone
make pabile/p40:manna-harbour_miryoku:flash MIRYOKU_MAPPING=ROTATE # pabile/p40, rotate
layouts/community/ortho_4x10/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#if defined MIRYOKU_MAPPING_ROTATE
#define LAYOUT_miryoku( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
) \
LAYOUT_ortho_4x10( \
XXX, XXX, K37, K36, K35, K34, K33, K32, XXX, XXX, \
K29, K28, K27, K26, K25, K24, K23, K22, K21, K20, \
K19, K18, K17, K16, K15, K14, K13, K12, K11, K10, \
K09, K08, K07, K06, K05, K04, K03, K02, K01, K00 \
)
#else
#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
) \
LAYOUT_ortho_4x10( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX \
)
#endif
layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
ortho_4x12

For the ortho_4x12 layout, the middle two columns, and the 2 keys on each end of the bottom row are unused. This allows the hands to be positioned without ulnar deviation of the wrists.

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-ortho_4x12.png

For split keyboards using this layout the halves can be positioned and rotated for each hand and so an alternative mapping is provided. The right half is as follows: The rightmost column bottom 3 keys is the pinkie column. The middle 4 columns top 3 rows are for the remaining fingers. The pinkie column is one row lower than the other columns to provide some column stagger. The bottom row left 3 keys are the thumb keys. The remaining keys are unused. To select this mapping, append MIRYOKU_MAPPING=SPLIT to the make command line when building.

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-ortho_4x12-split.png

An alternative with extended thumb position but without pinkie column stagger is also provided. To select this mapping, append MIRYOKU_MAPPING=EXTENDED_THUMBS to the make command line when building.

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-ortho_4x12-extended_thumbs.png

Keyboards supporting this layout: chimera_ls, contra, efreet, jj40, jnao, lets_split, lets_split_eh, meira, niu_mini, quark, tau4, telophase, vitamins_included, zlant, 40percentclub/4x4, 40percentclub/nori, acheron/shark, boardsource/4x12, cannonkeys/ortho48, dm9records/plaid, evyd13/eon40, evyd13/pockettype, handwired/floorboard, handwired/jotanck, handwired/wulkan, kbdfans/kbd4x, keebio/levinson, keebio/wavelet, mechstudio/ud_40_ortho, planck/ez, planck/light, planck/rev1, planck/rev2, planck/rev3, planck/rev4, planck/rev5, planck/rev6, planck/thk, rgbkb/zygomorph, zvecr/split_blackpill, zvecr/zv48, keebio/nyquist/rev1, keebio/nyquist/rev2, keebio/nyquist/rev3, montsinger/rebound/rev1, montsinger/rebound/rev2, montsinger/rebound/rev3, montsinger/rebound/rev4, signum/3_0/elitec, spaceman/pancake/feather, spaceman/pancake/promicro, ymdk/ymd40/v2.

Example build command lines:

make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=ortho_4x12 # planck, ortho_4x12
make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=ortho_4x12 MIRYOKU_MAPPING=EXTENDED_THUMBS # planck, ortho_4x12, extended thumbs
make keebio/levinson:manna-harbour_miryoku:flash MIRYOKU_MAPPING=SPLIT # levinson
make keebio/levinson:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # levinson, extended thumbs
layouts/community/ortho_4x12/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#if defined MIRYOKU_MAPPING_SPLIT
#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_ortho_4x12(\
KC_NO, K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   KC_NO,\
K00,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K09,\
K10,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K19,\
K20,   KC_NO, KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   KC_NO, KC_NO, K29\
)
#elif defined MIRYOKU_MAPPING_EXTENDED_THUMBS
#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_ortho_4x12(\
K00,   K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K29,\
KC_NO, KC_NO, KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   KC_NO, KC_NO, KC_NO\
)
#else
#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_ortho_4x12(\
K00,   K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K29,\
KC_NO, KC_NO, K32,   K33,   K34,   KC_NO, KC_NO, K35,   K36,   K37,   KC_NO, KC_NO\
)
#endif
layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
ortho_5x12

As per ortho_4x12 but the top row is unused.

Keyboards supporting this layout: fractal, jj50, jnao, boardsource/5x12, cannonkeys/atlas_alps, cannonkeys/ortho60, handwired/jot50, handwired/riblee_f401, handwired/riblee_f411, handwired/rs60, keycapsss/o4l_5x12, peej/lumberjack, preonic/rev1, preonic/rev2, preonic/rev3, rgbkb/zygomorph, keebio/nyquist/rev1, keebio/nyquist/rev2, keebio/nyquist/rev3.

Example build command lines:

make preonic/rev3:manna-harbour_miryoku:flash # preonic/rev3
make preonic/rev3:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # preonic/rev3, extended thumbs
make keebio/nyquist/rev3:manna-harbour_miryoku:flash MIRYOKU_MAPPING=SPLIT # nyquist/rev3, split
make keebio/nyquist/rev3:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # nyquist/rev3, extended thumbs
layouts/community/ortho_5x12/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#if defined MIRYOKU_MAPPING_SPLIT
#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_ortho_5x12(\
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
KC_NO, K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   KC_NO,\
K00,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K09,\
K10,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K19,\
K20,   KC_NO, KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   KC_NO, KC_NO, K29\
)
#elif defined MIRYOKU_MAPPING_EXTENDED_THUMBS
#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_ortho_5x12(\
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
K00,   K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K29,\
KC_NO, KC_NO, KC_NO, K32,   K33,   K34,   K35,   K36,   K37,   KC_NO, KC_NO, KC_NO\
)
#else
#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_ortho_5x12(\
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,\
K00,   K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K29,\
KC_NO, KC_NO, K32,   K33,   K34,   KC_NO, KC_NO, K35,   K36,   K37,   KC_NO, KC_NO\
)
#endif
layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
ortho_5x15

For the ortho_5x15 layout, the top row, middle 5 columns, and the 2 keys on each end of the bottom row are unused. This allows the hands to be positioned without ulnar deviation of the wrists.

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-ortho_5x15.png

An alternative subset mapping is also provided with the thumb keys shifted across one position in the direction of thumb extension. To select this mapping, append MIRYOKU_MAPPING=EXTENDED_THUMBS to the make command line when building.

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-ortho_5x15-extended_thumbs.png

Keyboards supporting this layout: atomic, geminate60, idobo, punk75, xd75, 40percentclub/5x5, 40percentclub/i75, cannonkeys/ortho75, sendyyeah/75pixels.

Example build command lines:

make atomic:manna-harbour_miryoku:flash # atomic
make atomic:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # atomic, extended thumbs
make idobo:manna-harbour_miryoku:flash # idobo
layouts/community/ortho_5x15/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#if defined MIRYOKU_MAPPING_EXTENDED_THUMBS
#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29,\
N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39\
)\
LAYOUT_ortho_5x15(\
XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
K00, K01, K02, K03, K04, XXX, XXX, XXX, XXX, XXX, K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14, XXX, XXX, XXX, XXX, XXX, K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29,\
XXX, XXX, XXX, K32, K33, K34, XXX, XXX, XXX, K35, K36, K37, XXX, XXX, XXX\
)
#else
#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29,\
N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39\
)\
LAYOUT_ortho_5x15(\
XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
K00, K01, K02, K03, K04, XXX, XXX, XXX, XXX, XXX, K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14, XXX, XXX, XXX, XXX, XXX, K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29,\
XXX, XXX, K32, K33, K34, XXX, XXX, XXX, XXX, XXX, K35, K36, K37, XXX, XXX\
)
#endif
layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
planck_mit

The middle two columns including the middle 2u key, and the 2 keys on each end of the bottom row are unused.

Keyboards supporting this layout: bm40hsrgb, contra, efreet, jj40, latin47ble, mt40, niu_mini, quark, zlant, dm9records/plaid, evyd13/eon40, handwired/aranck, handwired/heisenberg, kbdfans/kbd4x, planck/ez, planck/light, planck/rev1, planck/rev2, planck/rev3, planck/rev4, planck/rev5, planck/rev6, planck/thk, spaceman/pancake/feather, spaceman/pancake/promicro.

Example build command lines:

make planck/ez:manna-harbour_miryoku:flash # planck ez
make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=planck_mit # planck rev6, mit
layouts/community/planck_mit/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,                 K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,                 K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,                 K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,                 K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_planck_mit(\
K00,   K01,   K02,   K03,   K04,   KC_NO, KC_NO, K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,   KC_NO, KC_NO, K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,   KC_NO, KC_NO, K25,   K26,   K27,   K28,   K29,\
KC_NO, KC_NO, K32,   K33,   K34,      KC_NO,     K35,   K36,   K37,   KC_NO, KC_NO\
)
layouts/community/planck_mit/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
split_3x5_3

Keyboards supporting this layout: arch_36, boardsource/microdox, centromere, crkbd, eek, miniaxe, minidox/rev1, pteron36, squiggle/rev1, suihankey/split/rev1.

Example build command lines:

make crkbd:manna-harbour_miryoku:flash # crkbd
make minidox:manna-harbour_miryoku:flash # minidox
layouts/community/split_3x5_3/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define LAYOUT_miryoku(\
K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29,\
N30,   N31,   K32,   K33,   K34,          K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_split_3x5_3(\
K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09,\
K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19,\
K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29,\
              K32,   K33,   K34,          K35,   K36,   K37\
)
layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
split_3x6_3

The outer columns are unused.

Keyboards supporting this layout: centromere, crkbd, bastardkb/tbkmini.

Example build command lines:

make bastardkb/tbkmini:manna-harbour_miryoku:flash # bastardkb/tbkmini
make crkbd:manna-harbour_miryoku:flash # crkbd
layouts/community/split_3x6_3/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define LAYOUT_miryoku(\
       K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09,\
       K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19,\
       K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29,\
       N30,   N31,   K32,   K33,   K34,          K35,   K36,   K37,   N38,   N39\
)\
LAYOUT_split_3x6_3(\
KC_NO, K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09,   KC_NO,\
KC_NO, K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19,   KC_NO,\
KC_NO, K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29,   KC_NO,\
                     K32,   K33,   K34,          K35,   K36,   K37\
)
layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

Keyboards

To use the keymap on a keyboard which does not support the layouts feature, LAYOUT_miryoku is defined as a macro mapping onto the keyboard's own LAYOUT macro, leaving the unused keys as KC_NO.

atreus

Only the main 5x3 alphas and the inner 3 thumb keys are used.

To build for this keyboard,

make atreus:manna-harbour_miryoku:flash
keyboards/atreus/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29,\
N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39\
)\
LAYOUT(\
K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29,\
XXX, XXX, XXX, K32, K33, K34,      K35, K36, K37, XXX, XXX, XXX\
)
keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
bastardkb/scylla

To build for this keyboard,

make bastardkb/scylla:manna-harbour_miryoku:flash
keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku( \
     K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, \
     K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, \
     K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29, \
     N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39 \
) \
LAYOUT_split_4x6_5( \
XXX, XXX, XXX, XXX, XXX, XXX,                XXX, XXX, XXX, XXX, XXX, XXX, \
XXX, K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, XXX, \
XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX, \
XXX, K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29, XXX, \
               K32, K33, K34,                K35, K36, K37, \
                    XXX, XXX,                XXX, XXX \
)
keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
ergotravel

To build for this keyboard,

make ergotravel:manna-harbour_miryoku:flash
keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku( \
     K00, K01, K02, K03, K04,                 K05, K06, K07, K08, K09, \
     K10, K11, K12, K13, K14,                 K15, K16, K17, K18, K19, \
     K20, K21, K22, K23, K24,                 K25, K26, K27, K28, K29, \
     N30, N31, K32, K33, K34,                 K35, K36, K37, N38, N39 \
) \
LAYOUT( \
XXX, K00, K01, K02, K03, K04, XXX,       XXX, K05, K06, K07, K08, K09, XXX, \
XXX, K10, K11, K12, K13, K14, XXX,       XXX, K15, K16, K17, K18, K19, XXX, \
XXX, K20, K21, K22, K23, K24, XXX,       XXX, K25, K26, K27, K28, K29, XXX, \
XXX, XXX, XXX, K32,      K33, K34,       K35, K36,      K37, XXX, XXX, XXX  \
)
keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
for_science

The top row is unused.

To build for this keyboard,

make for_science:manna-harbour_miryoku:flash
keyboards/for_science/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04,     K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,     K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,     K25, K26, K27, K28, K29,\
N30, N31, K32, K33, K34,     K35, K36, K37, N38, N39\
)\
LAYOUT(\
XXX, XXX, XXX, XXX, XXX,     XXX, XXX, XXX, XXX, XXX,\
K00, K01, K02, K03, K04,     K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,     K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,     K25, K26, K27, K28, K29,\
          K32, K33, K34,     K35, K36, K37\
)
keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
gergo

Only the main 5x3 alphas and the outer 3 thumb keys are used.

To build for this keyboard,

make gergo:manna-harbour_miryoku:flash
keyboards/gergo/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39\
)\
LAYOUT_gergo(\
XXX, K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14, XXX,                XXX, K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24, XXX, XXX,      XXX, XXX, K25, K26, K27, K28, K29, XXX,\
                    K32, K33, K34, XXX,      XXX, K35, K36, K37\
)
keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
handwired/dactyl_manuform/4x5

Only the main 5x3 alphas and the main 3 thumb keys are used.

To build for this keyboard,

make handwired/dactyl_manuform/4x5:manna-harbour_miryoku:flash
keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
K00, K01, K02, K03, K04,                         K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,                         K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,                         K25, K26, K27, K28, K29,\
N30, N31, K32, K33, K34,                         K35, K36, K37, N38, N39\
)\
LAYOUT( \
K00, K01, K02, K03, K04,                         K05, K06, K07, K08, K09,\
K10, K11, K12, K13, K14,                         K15, K16, K17, K18, K19,\
K20, K21, K22, K23, K24,                         K25, K26, K27, K28, K29,\
     XXX, XXX,                                             XXX, XXX, \
               K32, K33,                         K36, K37, \
                         K34, XXX,     XXX, K35, \
                         XXX, XXX,     XXX, XXX \
)
keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
handwired/dactyl_manuform/5x6

Only the main 5x3 alphas and the main 3 thumb keys are used.

To build for this keyboard,

make handwired/dactyl_manuform/5x6:manna-harbour_miryoku:flash
keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                         K05, K06, K07, K08, K09, \
     K10, K11, K12, K13, K14,                         K15, K16, K17, K18, K19, \
     K20, K21, K22, K23, K24,                         K25, K26, K27, K28, K29, \
     N30, N31, K32, K33, K34,                         K35, K36, K37, N38, N39 \
) \
LAYOUT_5x6( \
XXX, XXX, XXX, XXX, XXX, XXX,                         XXX, XXX, XXX, XXX, XXX, XXX, \
XXX, K00, K01, K02, K03, K04,                         K05, K06, K07, K08, K09, XXX, \
XXX, K10, K11, K12, K13, K14,                         K15, K16, K17, K18, K19, XXX, \
XXX, K20, K21, K22, K23, K24,                         K25, K26, K27, K28, K29, XXX, \
          XXX, XXX,                                             XXX, XXX, \
                    K32, K33,                         K36, K37, \
                              K34, XXX,     XXX, K35, \
                              XXX, XXX,     XXX, XXX \
)
keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
keebio/iris

Only the main 5x3 alphas and the bottom 3 thumb keys are used.

To build for this keyboard,

make keebio/iris/rev4:manna-harbour_miryoku:flash
keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39\
)\
LAYOUT(\
XXX, XXX, XXX, XXX, XXX, XXX,                XXX, XXX, XXX, XXX, XXX, XXX,\
XXX, K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24, XXX,      XXX, K25, K26, K27, K28, K29, XXX,\
                    K32, K33, K34,      K35, K36, K37\
)
keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
keyboardio/atreus

Only the main 5x3 alphas and the inner 3 thumb keys are used.

To build for this keyboard,

make keyboardio/atreus:manna-harbour_miryoku:flash
keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku( \
K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, \
K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, \
K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29, \
N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39 \
) \
LAYOUT( \
K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, \
K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, \
K20, K21, K22, K23, K24, XXX,      XXX, K25, K26, K27, K28, K29, \
XXX, XXX, XXX, K32, K33, K34,      K35, K36, K37, XXX, XXX, XXX \
)
keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
lily58

Only the main 5x3 alphas and the inner 3 thumb keys are used.

To build for this keyboard,

make lily58:manna-harbour_miryoku:flash
keyboards/lily58/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39\
)\
LAYOUT(\
XXX, XXX, XXX, XXX, XXX, XXX,                XXX, XXX, XXX, XXX, XXX, XXX,\
XXX, K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24, XXX,      XXX, K25, K26, K27, K28, K29, XXX,\
               XXX, K32, K33, K34,      K35, K36, K37, XXX\
)
keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
moonlander

The main 5x3 alphas are used as usual. The primary, secondary, and tertiary thumb keys are the closest piano key, middle piano key, and the innermost key of the partial bottom row, respectively. The remaining keys are unused.

To build for this keyboard,

make moonlander:manna-harbour_miryoku:flash
keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,               K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,               K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,               K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,               K35, K36, K37, N38, N39\
)\
LAYOUT_moonlander(\
XXX, XXX, XXX, XXX, XXX, XXX, XXX,     XXX, XXX, XXX, XXX, XXX, XXX, XXX,\
XXX, K00, K01, K02, K03, K04, XXX,     XXX, K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14, XXX,     XXX, K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24,               K25, K26, K27, K28, K29, XXX,\
XXX, XXX, XXX, XXX, K32,      XXX,     XXX,      K37, XXX, XXX, XXX, XXX,\
                    K33, K34, XXX,     XXX, K35, K36\
)
keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
redox_w

Only the main 5x3 alphas and the main 3 thumb keys are used.

To build for this keyboard,

make redox_w:manna-harbour_miryoku:flash
keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39\
)\
LAYOUT(\
XXX, XXX, XXX, XXX, XXX, XXX,                          XXX, XXX, XXX, XXX, XXX, XXX,\
XXX, K00, K01, K02, K03, K04, XXX,                XXX, K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14, XXX,                XXX, K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24, XXX, XXX,      XXX, XXX, K25, K26, K27, K28, K29, XXX,\
XXX, XXX, XXX, XXX,    K32,   K33, K34,      K35, K36,    K37,   XXX, XXX, XXX, XXX\
)
keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
sofle

To build for this keyboard,

make sofle:manna-harbour_miryoku:flash
keyboards/sofle/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#define LAYOUT_miryoku(\
     K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09,\
     K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19,\
     K20, K21, K22, K23, K24,                K25, K26, K27, K28, K29,\
     N30, N31, K32, K33, K34,                K35, K36, K37, N38, N39\
)\
LAYOUT(\
XXX, XXX, XXX, XXX, XXX, XXX,                XXX, XXX, XXX, XXX, XXX, XXX,\
XXX, K00, K01, K02, K03, K04,                K05, K06, K07, K08, K09, XXX,\
XXX, K10, K11, K12, K13, K14,                K15, K16, K17, K18, K19, XXX,\
XXX, K20, K21, K22, K23, K24, XXX,      XXX, K25, K26, K27, K28, K29, XXX,\
          XXX, XXX, K32, K33, K34,      K35, K36, K37, XXX, XXX\
)
keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
splitkb/kyria

Only the main 5x3 alphas and the middle 3 lower thumb keys are used.

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-kyria.png

An alternative subset mapping is also provided with the thumb keys shifted one position in the direction of thumb extension. To select this mapping, append MIRYOKU_MAPPING=EXTENDED_THUMBS to the make command line when building.

https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-kyria-extended_thumbs.png

To build for this keyboard,

make splitkb/kyria:manna-harbour_miryoku:flash
make splitkb/kyria:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # extended thumb position
keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define XXX KC_NO

#if defined MIRYOKU_MAPPING_EXTENDED_THUMBS
#define LAYOUT_miryoku( \
     K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09, \
     K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19, \
     K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29, \
     N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39 \
) \
LAYOUT( \
XXX, K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09, XXX, \
XXX, K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19, XXX, \
XXX, K20, K21, K22, K23, K24, XXX, XXX,      XXX, XXX, K25, K26, K27, K28, K29, XXX, \
               XXX, XXX, K32, K33, K34,      K35, K36, K37, XXX, XXX \
)
#else
#define LAYOUT_miryoku( \
     K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09, \
     K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19, \
     K20, K21, K22, K23, K24,                          K25, K26, K27, K28, K29, \
     N30, N31, K32, K33, K34,                          K35, K36, K37, N38, N39 \
) \
LAYOUT( \
XXX, K00, K01, K02, K03, K04,                          K05, K06, K07, K08, K09, XXX, \
XXX, K10, K11, K12, K13, K14,                          K15, K16, K17, K18, K19, XXX, \
XXX, K20, K21, K22, K23, K24, XXX, XXX,      XXX, XXX, K25, K26, K27, K28, K29, XXX, \
               XXX, K32, K33, K34, XXX,      XXX, K35, K36, K37, XXX \
)
#endif
keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>
torn

To build for this keyboard,

make torn:manna-harbour_miryoku:flash
keyboards/torn/keymaps/manna-harbour_miryoku/config.h

Contains subset mapping.

// <<header>>

<<license-qmk>>

#pragma once

#define LAYOUT_miryoku( \
       K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09, \
       K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19, \
       K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29, \
       N30,   N31,   K32,   K33,   K34,          K35,   K36,   K37,   N38,   N39 \
) \
LAYOUT_split_3x6_4( \
KC_NO, K00,   K01,   K02,   K03,   K04,          K05,   K06,   K07,   K08,   K09,   KC_NO, \
KC_NO, K10,   K11,   K12,   K13,   K14,          K15,   K16,   K17,   K18,   K19,   KC_NO, \
KC_NO, K20,   K21,   K22,   K23,   K24,          K25,   K26,   K27,   K28,   K29,   KC_NO, \
              KC_NO, K32,   K33,   K34,          K35,   K36,   K37,   KC_NO \
)
keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c

Required by the build system.

// <<header>>

<<license-qmk>>

Customisation

To add customisations to a keyboard or layout while importing the miryoku keymap, copy config.h and keymap.c from the keyboard or layout's manna-harbour_miryoku/ directory to a new directory, and create rules.mk containing USER_NAME := manna-harbour_miryoku. The miryoku keymap will be imported and customisations can be added to those files as usual. Keycodes can be added to unused keys by editing LAYOUT_miryoku in config.h.

For an unsupported keyboard or layout, do as above with a similar keyboard or layout and modify LAYOUT_miryoku in config.h referring to the keyboard or layout's LAYOUT macro.

Examples

To use any of the examples, create a new branch from the miryoku development branch and follow the same steps as seen in the commit messages and code changes in the examples, making the appropriate changes for your keyboard and desired customisations.

Experimental Features

Bilateral Combinations

Retro Shift

<img src=" title="https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/logos/manna-harbour-boa-32.png" />