* Keyboard: revamp frosty-flake leds
This commit transitions bpiphany/frosty_flake to led_update_{kb,user}
and rewrites the AVR bit twiddling logic to use the standard QMK GPIO
API.
* Keyboard: rewrite frosty_flake's matrix reader to be a lite custom matrix
This commit replaces frosty_flake's custom matrix and debounce logic
with a "lite" custom matrix. In addition to being somewhat clearer, this
allows a consumer of the flake board to choose their own debouncing
algorithm. The one closest to the implementation originally in use is
sym_g, but this opens us up to supporting eager_pk and eager_pr.
The original matrix code was 18 columns for 8 rows, but using a single
row read and unpacking the bits into individual columns. To simplify,
I've changed the key layout to be 8C 18R instead of 18C 8R: this lets us
use a single read directly into the matrix _and_ drop down to a uint8_t
instead of a uint32_t for matrix_row_t.
Since we're no longer implementing our own debouncing and row unpacking,
we save ~400 bytes on the final firmware image.
Fully tested against a CM Storm QFR hosting the flake -- this commit
message was written using the new matrix code.
Firmware Sizes (assuming stock configuration as of 42d6270f2)
Matrix+Debounce Size (bytes)
--------------- ------------
original 17740
new + sym_g 17284
new + eager_pr 18106
new + eager_pk 18204
I expect that there are some scanning speed benefits as well.
* Keyboard: update frosty_flake's UNUSED_PINS
* Keyboard: Remove meaningless weak redefinitions from frosty
These are not necessary (and all of them already live somewhere in
Quantum).
* Add VIA support for Prime_L
* Update keyboards/primekb/prime_l/v1/config.h
* Add prime_exl_plus keyboard
* Temporary removal of prime_exl_plus
* Add Prime_EXL Plus, including VIA support
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/rules.mk
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keymap.c
* correct spacing of keymaps and layout macro. move indicator logic from user space to keyboard space
* further corrections to keymaps and layout macro.
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update prime_exl_plus.c
* small edit to prime_exl_plus.c
* Add via support to Prime_M and clean things up
* Update rules.mk
* Update keyboards/primekb/prime_m/readme.md
* Update keyboards/primekb/prime_m/readme.md
* Update keyboards/primekb/prime_m/config.h
Including the `xB` suffix prevents qmk_compiler (and thus QMK Configurator) from compiling firmware for the Wete.
Rolling this change back until we work out a long-term solution for the suffixes.
* Add VIA support for Prime_L
* Update keyboards/primekb/prime_l/v1/config.h
* Add prime_exl_plus keyboard
* Temporary removal of prime_exl_plus
* Add Prime_EXL Plus, including VIA support
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/readme.md
* Update keyboards/handwired/prime_exl_plus/rules.mk
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keyboards/handwired/prime_exl_plus/info.json
* Update keymap.c
* correct spacing of keymaps and layout macro. move indicator logic from user space to keyboard space
* further corrections to keymaps and layout macro.
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update keyboards/handwired/prime_exl_plus/prime_exl_plus.c
* Update prime_exl_plus.c
* small edit to prime_exl_plus.c
* [Keyboard] Add Wete
* Fix width and height in Wete info.json
* Use default board files, core backlight, and disable RTC
* Disable I2C, SPI. Minor corrections
* Keymap typo update
* Add LAYOUT_all to info.json
* Remove extra spaces in README, delete matrix_*_kb functions
* Fix layout errors in wete.h, and some minor corrections
* Actually fix LAYOUT_all in info.json
* move lighting code from VIA into the keyboard's .c file so that every keymap can access it
* after some serious conversations with default and wkl, they agreed to let me modify their keymaps. They weren't too happy
* add a VIA keymap for kbd75
* rev2 is a completely different pcb allowing a NEW layout, setting this to have a different product id so users don't get confused when they're able to enable numpad layout on rev1 VIA
* Update keyboards/kbdfans/kbd75/rev1/config.h
Co-Authored-By: Joel Challis <git@zvecr.com>
* Update keyboards/kbdfans/kbd75/rev2/config.h
Co-Authored-By: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Added custom keymap
* Update keyboards/preonic/keymaps/elisiano/keymap.c
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Address PR comments and added CTL_T(KC_ESC) on other layouts as well
Co-authored-by: Ryan <fauxpark@gmail.com>
* correct indicator light states.
function of indicator lights was inverted. these changes correct that.
* flesh out keymaps pre production
* Enable extrakey in rules
* Prime_BLE initial commit
* Initial commit for Prime_L V2
* Update info.json
correct key spacing.
* update copyright
* Update readme.md
* Inital commit
* updates before PR into QMK master
* Drop Prime_EXL Plus from PR. Make requested changes to Prime_L V2
* Rename keyboards/primekb/Prime_l_v2/config.h to keyboards/primekb/prime_l_v2/config.h
* Rename keyboards/primekb/prime_l_v2/config.h to keyboards/primekb/Prime_l_v2/config.h
* remove directory Prime_l_v2
* re-submit with proper folder name.
* Restructure /primekb directory to merge /prime_l and /prime_l_v2
* made changes requested by QMK reviewers
* Update keyboards/primekb/prime_l/v1/readme.md
* Update keyboards/primekb/prime_l/v1/readme.md
* Update keyboards/primekb/prime_l/v1/readme.md
* added via keymap for kbd8x mkii
* adding via to kbd8x mk2
* modified via kbd8x mk2 keymap
* enable LTO kbd8x mk2 via keymap
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* removed backticks kbd8x mk2 via keymap
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* coding style cleanup, enable/disable misconfigured/broken features
* add SCLN missing, compile with backlight PWM warning
* edit json
* new info.json from KLE
* new info.json from KLE using QMK converter
* changes notes
* notes in pull request
* missing line in comments
* line wrap
* Update keyboards/kc60se/config.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/keymaps/default/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/rules.mk
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* comment back in rules.mk
* add 2 iso layouts and keymaps, 1 ansi kemap, compiled and tested
* keymaps and info
* Delete keymap.c
not ready, I need to get a few iso characters corrected
* Delete keymap.c
not ready, need to get a few iso character define correctly
* Update info.json
Bspc to Backspace
* no unicode
* gui_on and gui_off in readme
* Update keyboards/kc60se/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* remove is_command
* Update keyboards/kc60se/config.h
remove comment
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kc60se/config.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/kc60se/readme.md
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* remove \\ in keymaps
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/kc60se.h
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/kc60se/info.json
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* set led pin b2 to output mode in matrix_init_kb(), toggle it in led_update_kb()
* Update config.h
I had commented FORCE_NKRO out.. WHy did it com back?
Co-authored-by: Check your git settings! <chris@chris-laptop>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* [keymap] ninjonas keymap updates
* [refactor(kyria)] updating keymap for numpad layer to be transparent rather than ignores
* [keymap(lily58)] added numpad layer
* [keymap(crkbd)] added numpad layer activated through tapdance
* [fix(8170)] fixing code review changes requested by noroadsleft
* [fix(8170)] updating comments and .md files to use 'Cmd' instead of and ⌘
Clean up checks and logics that are unnecessary due to MILC updates.
Use pathlib instead of os.path for readability.
Use the 'pytest' keyboard for the tests.
Add community layout for 'handwired/onekey/pytest' so we can test
community layouts.
* Adding VIA support for 40percentclub/luddite
* Update config.h
* Update rules.mk
* Delete config.h
config.h was created to override the "default" of RGBLED_NUM 8
deleting the file to keep with defaults
* Removing block and comment as suggested
* Update PRODUCT_ID
Changing from:
#define PRODUCT_ID 0x0A0C
To:
#define PRODUCT_ID 0x4C55 // "LU"
* Changing Vendor ID
Changing Vendor ID from:
#define VENDOR_ID 0xFEED
To:
#define VENDOR_ID 0x3430 // "40"
* VIA support for Think6.5
* VIA support for Think6.5 Hotswap
* VIA works better with separate layout options
* Remove the colours used to help develop it in KLE
* Pay better attention to the JSON linter
* Update Think6.5 PRODUCT and remove VIA JSON defs
* VIA Support for the Idobo (ID75)
* Implemented the requested PR changes
* Readme was pointing to the wrong board
* Fixed Product ID
* Fixed Manufacturer name
* Better Vendor ID
Using the two 8-bit ASCII values from the keyboard name.
* Removed Bootmagic Lite as enabled anyway by VIA
* initial commit of VIA Support
* update PRODUCT (and MANUFACTURER) per VIA docs
Reference: https://caniusevia.com/docs/configuring_qmk#change-product
Updated MANUFACTURER so it matches what the PRODUCT says.
* enable Link Time Optimization per mechmerlin
* revert change to USB Product Name
* add two empty layers to via keymap
VIA keymaps need four layers in flash.
* correct the layer indexes
Start from 0, not 1.
* Drop in old files
* Make a blank template keyboard to refresh ancient files to latest config
* Update keymaps files to new format
* Remove chunks of config asked for removal in previous pullreqs
* Remove split pin option from config
* Update rules.mk to latest version
* Remove unused functions from polaris.c
* Add via keymap
* Build basic tsangan keymap; add QMK configurator info
* Remove temporary template
* Update keyboards/ai03/polaris/config.h
* Update keyboards/ai03/polaris/readme.md
* Update keyboards/ai03/polaris/readme.md
* Update keyboards/ai03/polaris/readme.md
* Update rules.mk
* Fixes as per pullreq
* Update keyboards/ai03/polaris/keymaps/default_ansi_tsangan/keymap.c
* Update keyboards/ai03/polaris/polaris.h
* Update keyboards/ai03/polaris/keymaps/default_ansi_tsangan/keymap.c
* Update keyboards/ai03/polaris/info.json
* Update keyboards/ai03/polaris/keymaps/testing/readme.md
* refactor keymaps
Create one keymap for each layout macro.
* remove config.h for default keymap
There's nothing in it.
* update readme
- use the new list format
- use a smaller version of the keyboard photo (does the readme really need a 14MP image on it?)
* correct indicator light states.
function of indicator lights was inverted. these changes correct that.
* flesh out keymaps pre production
* Enable extrakey in rules
* Prime_BLE initial commit
* Initial commit for Prime_L V2
* Update info.json
correct key spacing.
* update copyright
* Update readme.md
* Inital commit
* updates before PR into QMK master
* Drop Prime_EXL Plus from PR. Make requested changes to Prime_L V2
* Rename keyboards/primekb/Prime_l_v2/config.h to keyboards/primekb/prime_l_v2/config.h
* Rename keyboards/primekb/prime_l_v2/config.h to keyboards/primekb/Prime_l_v2/config.h
* remove directory Prime_l_v2
* re-submit with proper folder name.
* houndstooth
* Amended with collaborator suggestions
* LAYOUT fixup, left crud in keymap
* Fix missing comma in keymap.c
* Correct RGBLIGHT_ENABLE to no
Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
* YMDK NP21: matrix and keymap refactor
- refactored layout macros
- LAYOUT_ortho_6x4 orients the keyboard with the USB port to the back instead of to the right
- LAYOUT uses the previous sideways orientation (included for backwards compatibility)
- removed redundant includes from ymdk_np21.h
- added a readme for the default keymap
* add Configurator layout support
* fix layout macro and update keymaps
K2D switch position is actually physically on the top row, as the right half of a split Backspace.
* add QMK Configurator layout support
* Adding my keymap
Adding a personalized keymap to the Raine keyboard. This diffirentiates itself by being useble with nordic characters even when the bottom row has blockers. Also added ASCII art to help visualize what you are doing when programming the board.
* Update Readme.md
Ned image of the board
* Update Readme.md
Forgot a space in Readme
* Update Readme.md
And another missed space
* Update keymap.c
Renoved Definetion that is not used
* Update Readme.md
* Remove files for renaming
* Adding files after renaming
Was unable to get Girthub to push renamed files/folders. Therefore removeing and adding them again.
* add the via keymap
* get an appropriate unused VID
* fix formatting up a bit
* Update keyboards/kbdfans/kbd67/mkiirgb/v1/config.h
* Update keyboards/kbdfans/kbd67/mkiirgb/v2/config.h
* new alternative controller.
* following suggestions at qmk's 8059.
* forgot to replace some underscores and keycodes.
* following drashna's suggestions at qmk's 8059.
* following zvecr's suggestion in qmk's 8059.
* following noroadsleft's suggestion at qmk's 8059.
* [keymap(kyria)] moved OLED & encoder implementation to separate classes
* [feat] created logic to cycle through hue wheel when starting keyboard
* [feat] created logic to cycle through hue wheel and return to user's default color
* [refactor] updating OLED layout for crkbd & lily58
* [refactor] updating OLED layout for crkbd & lily58
* [fix(8070)] updating encoder.c logic based off drashna's code review
* [refactor(8070)] added key to send + Shift + M
* disable Console to save firmware space
* rules.mk templating
Add comments regarding the rules, to more closely match the ps2avrgb template.
* update info.json
This board has a quite interesting take on the standard TKL; why not show it off?
* update the vendor id for 1upkeyboards 1up60hte
* add the via keymap and rules file
* fix typo
* move the LTO to the keyboard's rules.mk
* Update keyboards/1upkeyboards/1up60hte/config.h
* Created the yoryer layout for the Quefrency 65%
* added rgb control layer
* Required changes to resolve PR #7947 issues
* - Updated the layer list as an enum
- Removed .gitignore file from keymap folder
* Removed the .gitignore from keymap folder
* Begin work on spfs, migrating ancient config
* QMK breaks if there's a dash in the board name
* Update info.json
* Make indicator LEDs work
* Build a readme
* Change title to match official GB thread name
* Add an ANSI WKL layout for simplicity
* Adjustments as per pullreq recommendations
* Remove unused functions from other keymap
* Add backlight custom driver to all boards not declaring it but overriding backlight
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Apply suggestions from code review
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Remove old tmk references from show_options.mk
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Add initial configuration and keymaps for Yatara Drink Me.
* Apply suggestions from code review
* Apply suggestions from code review
* Add transparent layers in VIA layout so there are four layers in total. Amend closing bracket indentation in keymap.c files.
* Add the Whitefox vanilla layout
Initial commit for whitefox vanilla keymap
Fix the mapped layout to match vanilla
Cleanup vanilla default
Rework the info file
Remove vanilla keymap as we don't really need this
* adds to theDora readme for more explicit directions on flashing,
with links and how to enter bootloader mode.
* fmt
* Corrects language of steps for loading firmware
* Update keyboards/ckeys/thedora/readme.md
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files
* Correct some 'rules.mk' in boards buried under vendor folders
* PR8027 patch
Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Add German programming layout for Lets Split
* Update copyright in config.h
* Add Hash-Symbol to keymap
* Change to fit suggestions in PR
* Changes as requested, but broken.
* Fix layer switching issue
* Add Quefrency Rev. 2
* Add encoder support
* Add RGB LED mapping info
* Add diode direction
* Revert removal of default folder for CI purposes
* Remove unneeded lines
* Rename ISO layout macros
* add VIA support for 1up60hse
* choose a vendor and product id that is not taken
* add mousekey_enable set to no as per Wilba's recommendation
* Update keyboards/1upkeyboards/1up60hse/keymaps/via/readme.md
* Update keyboards/1upkeyboards/1up60hse/keymaps/via/readme.md
* add a fourth layer
* might as well remove the config file as we are not including the one thing that was in it
* Fix Pulse4k info.json LAYOUT name
* Add missing functions to fix configurator
Add empty encoder functions to the keyboard code, as the configurator doesn't see the keymap defined functions at first.
To be able to override these functions, they are marked as 'weak'.
* Rework encoder functions another time
Default implementation is now provided as part of the keyboard, but they can still be overriden within the keymap (template is commented out by default)
* Reworked for VIA support
Reworked for VIA support and tidying up of older code.
* Fixed naming issues, and prepared for VIA compat
Via compat added
* Improve layouts, tidy code, via keymap
Added support for VIA and cleaned up some code and layouts.
* Implimented suggestions by MechMerlin
* Fix capitalisation
Mistake raised by Drashna now fixed.
* Tidy comments as requested by noroadsleft
* Tidy comments as requested by fauxpark
* feat(build): added script for compiling with docker easily
* chore: bring my own build with docker to master
* feat: merge ergodox ez into latest maste
* chore: remove my build with docker file
* chore: remove my changes to process_leader
* feat: more modular user danielo515
* Apply suggestions from @ridingqwerty
Co-Authored-By: ridingqwerty <george.g.koenig@gmail.com>
* chore: more suggestions implemented
* chore: add my basic details
* Apply suggestions from @drashna
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* fix: more @drashna fixes
* feat: @fauxpark optimization
* fix: some more @drashna improvements
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* chore: small improvement on layout
* fix: some more @drashna improvements
* chore: remove some F dance
Co-authored-by: ridingqwerty <george.g.koenig@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Ensure setPinInput actually sets input high-z
* Fixed _PIN_ADDRESS Macro arguments
as recommended by vomindoraan
* Fixed instances of setInput to use new behavour
* Changed kmac matrix to use input with pullups
* Update keyboards/gh60/revc/revc.h
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Fixed input state for unselect_rows
* fixed merge conflict
* Updated all instances of older uses of setPinInput()
* Fixed naming mistake
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Add VIA support to mxss and general cleanup
* Add support for RGB test for FLEDs
* Add LAYOUT_all to allow for more configuration
* Remove blank layers
* Updated readme
* Improve use of EEPROM
* Credit where its due
* Use the latest iteration of rgblight code
* Keep the RGB timer running if the front LED is in RGB mode
* Fix RGB breathing animation
* Better supported RGB animation
Only thing not working is alternating, but that's not too important
* Abstract front LED handlers from main kb code
* Add support for indicator LED color changing
* Remove debug statement
* Persist indicator LED colors
* Mark custom sections in rgblight.c
* Light commenting
* Fix up keymaps
* Add/update comments
* Remove bloat from default hex
* Tidy a stray tab
* Out with the old, in with the new
* Out with the old, in with the new
* Add LAYER_STATE_8BIT for VIA keymap
* Added KidBrazil custom keymap for CRKBD
-Custom Font
-Custom OLED output
* Added missing readme
* Oled Timeout Update for KidBrazil Keymap (#1)
* Setup Oled timeout based on simple timer
* Cleaned up comments and added timeout for LEDs
* Fixed some small errors
* Updated oled timout with matrix scan
* Updated oled timout with matrix scan
* Update withou eeprom
* Update timer code
* Use process user instead of keymap
* Added ifdef to protect oledtimer
* Updated with half timeout state for logo
* Removed middle tier timer
* Final cleanup of unused files
* Updated code as per suggestions & requests
* Second round of revisions
* Updated keymap to better handle LED timeout
- Added boolean to hold LED state
- Added init function to set rgb to known state
- Modified RGB_TOG to work with noeeprom commands
* Finished adding the timeout for OLED and testing on CRKBD
* Updated documentation
* fixed the timeout logic so it works as intended
* Added initial limits to color settings
* Added layer reset as part of the iddle timeout process
* Split Keymap into more manageable files
* Finalizing RGB Layer status on CRKBD
- Refactored OLED timeout to deal only with oled
- If user remains iddle on game layer for too long it will switch to
default
- LED / OLED iddle working
- Minor changes to _SYM layer
- Removed some rgb controls from keyboard due to layer dependent RGB
colors
* Update keyboards/crkbd/keymaps/kidbrazil/keymap.c
Used suggestion from Drashna to replace EEPROM_RESET with shorter version.
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Update keyboards/crkbd/keymaps/kidbrazil/keymap.c
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Implemented drashna's comment
Co-authored-by: Drashna Jaelre <drashna@live.com>
* fix audio enable repetition
* remove RGB LED support as this board has no RGB LB LEDs
* use pragma once
* this board has no backlight support
* enable COMMAND_ENABLE
* comment cleanups
* setting bootmagic to lite as the first board thathat has this PCB has a solid bottom. If someone forgets to put in a RESET key on their keymap, they are not going to have fun resetting the board
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* Update keyboards/clueboard/66/rev4/rules.mk
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* convert the palset and palclear routines to setpinoutput and writepinlow
* remove scankb
* restore original guards instead of pragma once
Co-authored-by: fauxpark <fauxpark@gmail.com>
* Swap two cols to fix skog lite
* Fix readme
* Suggested formatting
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* both backspace and left shift matrix positions off by one
* update the led_update routine
* update readme
* Update keyboards/gray_studio/think65/solder/solder.c
* Add DZ60 to VIA
* Changed vendor id from 'KF' to 'DZ'
* Capitalize hex
* Fix Via_layout_options size setting
* Update keyboards/dz60/keymaps/via/rules.mk
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* WIP do not merge
* first pass at custom preonic layout
* add auto shift and reset via leader key
* Update readme
* update copyright notice
* formatting changes
* fix: use MO instead of process_record_user
* added backslash and moved grave position
* remove extraneous 'j' characer in NUMPAD template
* update template formatting
* remove process_record_user
* swap "!" with "@"
* fix readme formatting
* update readme layout image
* Add mx5160 keyboard
* Make necessary changes for merging
rules.mk cleanup, QMK's built in alias for KC_TRNS and change readme blurb
* Add info.json as well
* Update readme, info.json
* Change layout name, update led function
* Fix info.json
* Update rules.mk
* Remove custom backlight code for PS2AVRGB boards
* Remove custom driver setting
* BACKLIGHT_BREATHING goes in config.h, not here
* Don't need to include backlight.c again here either
* Turn on backlight for Canoe
* Disable console on a few boards due to oversize
* Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards
* Define diode direction for failing boards
* Matching parentheses
* Put onekey diode directions in top level config
* Initial commit
* Modified keymap and updated readme.
* fixed numbering in readme
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Update README.md
* Made requested changes in PR.
* Rename README.md to readme.md
* swapped media control keys
* updated right alt key to apply shift key for emacs
* updated R_Alt to remove shift
* Updated readme
* add layout 2 and rename existing folder to layout 4
- renamed existing folder with directional layout to layout 4
- udpated existing readme
- Added layout_60_2
* update flash script per pull request review
* Added keymap profile to space65
- This keymap profile is for MacOS with VIM key bindings
- See readme for more information
* Update keyboards/gray_studio/space65/keymaps/billiams/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/gray_studio/space65/keymaps/billiams/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/gray_studio/space65/keymaps/billiams/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/gray_studio/space65/keymaps/billiams/readme.md
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/gray_studio/space65/keymaps/billiams/keymap.c
Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com>
* remove unnecessary code from keymap
* updated keys and cleaned up readme
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
On the v1.2 PCB the slave half leds go in reverse order compared to the master half.
With this change, the leds are all in order from left to right, so animations like
Knight Rider look like you'd expect.
* ISO UK layout for Graystudio Space65
* Quick line on how to build it in the readme
* Update ASCII art layout guide to match reality
* Whoops, space is actually K47, not K46
* Rename to 65_iso_blocker and remove uk designation
Danny
Dustin L. Howett
Nick Brassel
Andrew Kannan
Ryan
holtenc
James Young
James Young
Brandon Schlack
holtenc
Joel Challis
Ramon Imbao
MechMerlin
Josh Johnson
ai03
carlxia
yiancar
Elisiano Petrini
swanmatch
buzzlighter1
asymy
Jonathan Rascher
Blake C. Lewis
gtips
Jumail Mundekkat
Mike Tsao
Jonas Avellana
spe2
Erovia
morbetter
Keelhauler
Rys Sommefeldt
IFo Hancroft
a_p_u_r_o
dnsnrk
madhogs
nopunin10did
worldspawn00
Mehmet Denizhan Erdem
Max Rumpf
Yasuhiro SHIMIZU
esinlayo
Alfred Maler
Marius Rugan
ridingqwerty
plikki
KamoNanban
mechlovin
Ibnu Daru Aji
Daniel H Klein
ENDO Katsuhiro
Jesse Leventhal
Mike Rix Wolfe
Jorge Noguera
takashiski
Jason Dunsmore
Yatara
Alberto Grespan
Addison Cole
Bryan Arendt
Cody Bender
stanrc85
moseschmiedel
coseyfannitutti
Samuel Jahnke
Rafael Azevedo
Flexerm
Daniel Rodríguez Rivero
Bryan Arendt
skullydazed
Mikkel Jeppesen
Lucas Moreira
yohewi
Wilba
Xelus22
Akaash Suresh
Cable Car Designs
Brett Inman
Rossman360
dsanchezseco
Dmitrijs Minajevs
Salicylic-acid3
clovervidia
Spaceman
Maarten Dekkers
Takuya Urakawa
M. de Verteuil
Nathan Gray
Hybrid65
Callum Oakley
Ben
Josh Hinnebusch
Xyverz