* Add SquishyTKL
* Add SquishyTKL-FRL
* Adjust readme.md and info.json
* Add JIS support for SquishyTKL
* Fix JIS layout macro
* Fix via layout and keymap
* Migrate SquishyTKL to STM32duino bootloader
* Make chibios conf files generic
* Change TKL via keymap to match number of layers
* Apply chibios changes to FRL as well
* Adjust README regarding flashing with dfu-util
* Add license and header guard
* Added custom Keymap
* Added Images to README
* Added Layer 1 Keys for RGB control
* Added GPL2+ License to keymap.c
* Removed extra json files and added a few lines to README
It so happens that when releasing the control key prior to the main key (C-h, C-i, C-n,
...), the substituted keycode was continuously sent in a loop after that (even when
releasing said key). The workaround so far was to type any other key to stop the loop.
This commit fixes such behavior by resetting the substitution keycode sent when the ctrl
released situation conditional is detected (and that the substitution keycode was on).
* add keyboard new macro pad "Kuro"
* change main readme.md
* remove not used code from default/keymap.c
* Remove unnecessary code
* Supports info.json
* removed back slash and not used functions.
* update at product link. add japanese messages.
* Merge All
* [Shiro]Add MacKeymap
* Change key code. Numpad→Numkey
* adding revision A
* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update readme.md
Adding instruction on how to enter bootloader
* adding instruction on how to enter bootloader (DFU)
adding instruction on how to enter bootloader (DFU)
* updated description
* Update keyboards/4pplet/eagle_viper_rep/rev_a/halconf.h
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update keyboards/4pplet/eagle_viper_rep/rev_a/rev_a.c
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update keyboards/4pplet/eagle_viper_rep/rev_a/config.h
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update keyboards/4pplet/eagle_viper_rep/rev_a/chconf.h
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update keyboards/4pplet/eagle_viper_rep/keymaps/default/keymap.c
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Restoring palSetLineMode for working underglow
I was experiencing the same issue as this: https://github.com/qmk/qmk_firmware/issues/12655#issuecomment-844104659
sigprof helped me resolve this issue.
* Update rev_a.c
removing palSetLineMode again, works great after rebase. Thanks!
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
The rev3 boards use RGBLIGHT_ENABLE now instead of BACKLIGHT_ENABLE.
This resolves the issue of flashing and losing functionality with the default keymap.
Added missing closing comment bit */
This seems to cause the QMK configurator to break when clicking the compile button:
Compiling: keyboards/handwired/split89/split89.c In file included from [K:
ent]
/* COL2ROW, ROW2COL */
[K
cc1: all warnings being treated as errors
|
|
|
make: *** ine/keyboards/handwired/split89/split89.o] Error 1
* Extensible split data sync capability through transactions.
- Split common transport has been split up between the transport layer
and data layer.
- Split "transactions" model used, with convergence between I2C and
serial data definitions.
- Slave matrix "generation count" is used to determine if the full slave
matrix needs to be retrieved.
- Encoders get the same "generation count" treatment.
- All other blocks of data are synchronised when a change is detected.
- All transmissions have a globally-configurable deadline before a
transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms).
- Added atomicity for all core-synced data, preventing partial updates
- Added retries to AVR i2c_master's i2c_start, to minimise the number of
failed transactions when interrupts are disabled on the slave due to
atomicity checks.
- Some keyboards have had slight modifications made in order to ensure
that they still build due to firmware size restrictions.
* Fixup LED_MATRIX compile.
* Parameterise ERROR_DISCONNECT_COUNT.
This binary keymap for ANAVI Macro Pad 2 helps with 0 and 1:
left key: 0
right key: 1
Combo press both keys to control the backlit.
Suggested-by: Chris <christopher.walker@crowdsupply.com>
Signed-off-by: Leon Anavi <leon@anavi.org>
This keymap for ANAVI Macro Pad 2 contains a couple of Skype
shortcuts for MS Windows and GNU/Linux distributions:
- Ctrl+M: Mute/unmute microphone
- Ctrl+Shift+K: Start/stop camera
Signed-off-by: Leon Anavi <leon@anavi.org>
* Enable SPI1 for GMMK pro
* Setup initial boilerplate for new LED driver
* RGB matrix minimally functional
* Map full LED matrix
* Return keymap to default
* Fix printscreen LED mapping
* Reduce max brightness
* Default values for AW20216
* Add documentation for AW20216
* Disable console and warnings
* Run cformat
* Update drivers/awinic/aw20216.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
* make aw struct match issi struct
Co-authored-by: Drashna Jaelre <drashna@live.com>
* add led location defines
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Use led pin definitions in keyboard.c
* Add driver indices to led map
* Fix elif typo
* Run cformat
* Update docs
* Fix typo in docs
* Document global brightness limits
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Use memcmp to determine if matrix changed.
* Firmware size issues.
* Add documentation for the lack of need of MATRIX_ROW_PINS/MATRIX_COL_PINS, when overriding low-level matrix functions.
* Set bootloader to stm32-dfu for STM32F303
* Set bootloader to stm32-dfu for STM32F0x2
* Set bootloader to stm32-dfu for STM32F4x1
* Set bootloader to stm32duino for sowbug
* Delete redundant bootloader_defs headers
* Add some missing MCU name comments
* Move APM32 dfu-suffix overrides underneath bootloader
* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
* [Keymap] merge jdelkins userspace and associated keymaps
* Add copyright & license info
* Change rgblight_config.enable to rgblight_is_enabled()
* Update keyboards/dz60/keymaps/jdelkins/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/dz60/keymaps/jdelkins/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/dz60/keymaps/jdelkins/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Remove superfluous includes
* Change EXTRAFLAGS+=-flto to LTO_ENABLE=yes
* Remove unnecessary jdelkins_ss symlink in users
* Add copyright and license notices
* Use preferred way to determine capslock / numlock state
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Add #pragma once to a header
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Include QMK_KEYBOARD_H only once, in userspace header
* Remove unnecessary initialization in matrix_init_keymap
* Do process_record_keymap before cases handled in process_record_user
* Reorganize & simplify secrets feature enablement
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove superfluous break
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* include "print.h" instead of <print.h>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_cod16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* add #pragma once to a header
Co-authored-by: Ryan <fauxpark@gmail.com>
* include "print.h" instead of <print.h>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Remove copyright from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use tap_code16
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use :flash target where possible
* Remove special case flash target and use PROGRAM_CMD
* dz60/jdelkins_ss: use tap_code16
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
The code using sprintf() did not fit into flash when `merge/um70:via`
was compiled with avr-gcc 5.4.0:
* The firmware is too large! 29756/28672 (1084 bytes over)
Replacing `sprintf(wpm_str, " %03d", current_wpm);` with custom
formatting code reduces the firmware size by 1504 bytes, which is enough
to make the `merge/um70:via` firmware fit:
* The firmware size is approaching the maximum - 28252/28672 (98%, 420 bytes free)
* Add Per Key functionality for AutoShift (#11536)
* LED Matrix: Reactive effect buffers & advanced indicators (#12588)
* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)
* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)
* LED Matrix: Split (#12633)
* [CI] Format code according to conventions (#12650)
* feat: infinite timeout for leader key (#6580)
* feat: implement leader_no_timeout logic
* docs(leader_key): infinite leader timeout docs
* Format code according to conventions (#12680)
* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)
* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)
Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).
* Update ADC docs to match the actually used resolution
ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly. Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).
* Fix pinToMux() for B12 and B13 on STM32F3xx
Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.
* Add support for all possible analog pins on STM32F1xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families). Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).
Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.
* Add support for all possible analog pins on STM32F4xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.
Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.
Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.
* Fix STM32F3xx ADC mux table in documentation
The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).
* Add STM32F1xx ADC pins to the documentation
* Add STM32F4xx ADC pins to the documentation
* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)
* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.
* Update flashing.md
* Update chconf.h
* Update config.h
* Update halconf.h
* Update mcuconf.h
* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)
* Add support for MCU = STM32F446 (#12619)
* Add support for MCU = STM32F446
* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64
* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.
* Format code according to conventions (#12682)
* Format code according to conventions (#12687)
* Add STM32L433 and L443 support (#12063)
* initial L433 commit
* change to XC
* fix L433
* disable all peripherals
* update system and peripheral clocks
* 433 change
* use its own board files
* revert its own board files
* l433 specific change
* fix stm32l432xx define
* remove duplicate #define
* fix bootloader jump
* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h
* move to L443
* move to L443
* fix sdmmc in mcuconf.h
* include STM32L443
* add L443
* Include L443 in compatible microcontrollers
* Include L443 in compatible microcontrollers
* Update config bootloader jump description
* Update ChibiOS define reasoning
* Update quantum/mcu_selection.mk
* fix git conflict
* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)
* Fix bad PR merge for #6580. (#12721)
* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)
* [CI] Format code according to conventions (#12731)
* Fixing transport's led/rgb matrix suspend state logic (#12770)
* [CI] Format code according to conventions (#12772)
* Fix comment parsing (#12750)
* Added OLED fade out support (#12086)
* fix some references to bin/qmk that slipped in (#12832)
* Resolve a number of warnings in `qmk generate-api` (#12833)
* New command: qmk console (#12828)
* stash poc
* stash
* tidy up implementation
* Tidy up slightly for review
* Tidy up slightly for review
* Bodge environment to make tests pass
* Refactor away from asyncio due to windows issues
* Filter devices
* align vid/pid printing
* Add hidapi to the installers
* start preparing for multiple hid_listeners
* udev rules for hid_listen
* refactor to move closer to end state
* very basic implementation of the threaded model
* refactor how vid/pid/index are supplied and parsed
* windows improvements
* read the report directly when usage page isn't available
* add per-device colors, the choice to show names or numbers, and refactor
* add timestamps
* Add support for showing bootloaders
* tweak the color for bootloaders
* Align bootloader disconnect with connect color
* add support for showing all bootloaders
* fix the pyusb check
* tweaks
* fix exception
* hide a stack trace behind -v
* add --no-bootloaders option
* add documentation for qmk console
* Apply suggestions from code review
* pyformat
* clean up and flesh out KNOWN_BOOTLOADERS
* Remove pointless SERIAL_LINK_ENABLE rules (#12846)
* Make Swap Hands use PROGMEM (#12284)
This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.
* Fix another bin/qmk reference (#12856)
* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)
* Fixup build errors on `develop` branch. (#12723)
* LED Matrix: Effects! (#12651)
* Fix syntax error when compiling for ARM (#12866)
* Remove KEYMAP and LAYOUT_kc (#12160)
* alias KEYMAP to LAYOUT
* remove KEYMAP and LAYOUT_kc
* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)
* Rename `point_t` -> `led_point_t` (#12864)
* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)
* Add missing LED Matrix suspend code to suspend.c (#12878)
* LED Matrix: Documentation (#12685)
* Deprecate `send_unicode_hex_string()` (#12602)
* Fix spelling mistake regarding LED Matrix in split_common. (#12888)
* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)
* Use milc.subcommand.config instead of qmk.cli.config (#12915)
* Use milc.subcommand.config instead
* pyformat
* remove the config test
* Add function to allow repeated blinking of one layer (#12237)
* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time
* Update doc
* Rework rgblight blinking according to requested change
* optimize storage
* Fixup housekeeping from being invoked twice per loop. (#12933)
* matrix: wait for row signal to go HIGH for every row (#12945)
I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/
Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.
After this commit, all keyboard matrix rows are interpreted correctly.
I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.
* ensure we do not conflict with existing keymap aliases (#12976)
* Add support for up to 4 IS31FL3733 drivers (#12342)
* Convert Encoder callbacks to be boolean functions (#12805)
* [Keyboard] Fix Terrazzo build failure (#12977)
* Do not hard set config in CPTC files (#11864)
* [Keyboard] Corne - Remove legacy revision support (#12226)
* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)
* Add Full-duplex serial driver for ARM boards (#9842)
* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)
* Backlight: add defines for default level and breathing state (#12560)
* Add dire message about LUFA mass storage bootloader (#13014)
* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)
Was causing compiler errors on some systems.
* Fix keyboards/keymaps for boolean encoder callback changes (#12985)
* `backlight.c`: include `eeprom.h` (#13024)
* Add changelog for 2021-05-29 Breaking Changes merge (#12939)
* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version
* Add recent develop changes
* Sort recent develop changes
* Remove sections for ChibiOS changes per tzarc
No ChibiOS changes this round.
* Add and sort recent develop changes
* add notes about keyboard moves/deletions
* import changelog for PR 12172
Documents the change to BOOTMAGIC_ENABLE.
* update section headings
* re-sort changelog
* add additional note regarding Bootmagic changes
* remove changelog timestamp
* update dates in main Breaking Changes docs
* fix broken section anchors in previous changelogs
* add link to backlight/eeprom patch to changelog
* highlight some more changes
* link PRs from section headers
* Restore standard readme
* run: qmk cformat --core-only
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
This keymap contains the following shortcuts for Microsoft Teams
on MS Windows and GNU/Linux distributions:
- Ctrl+Shift+M: Toggle mute
- Ctrl+Shift+O: Toggle video (doesn't work in a web browser)
NOTE: Mac users should replace Ctrl with Command in all shortcuts
Signed-off-by: Leon Anavi <leon@anavi.org>
* Create piv3rt's keymap
* Use tabs's LED as a caps lock indicator
* Fix indentation (tabs -> spaces)
* Set inital LED matrix color & mode
* Rename layers and add an RGBRST keycode
* Disable unused RGB effects
* Add RGB profiles
* Use ESC's LED as a num lock indicator
* Light up the keypad when _NUM layer is active
* Realign layers
* Remove legacy layer
* Fix CAPS key macro
* Reduce TAPPING_TERM to 100
* Change the caps LED to red and display the numlock one on special layers
* Add french accentuated caps + minor improvements on layers
* Remove left numpad
* Add french quotation marks
* Add key KC_NUBS
* Add terminal copy/paste
* Disable led profile on wakeup
* Change the default color
* Add AMD replay and record keys
* Add a MacOS layer
* Move Numpad
* Add GPLv2 license information
* Optimise custom RGB matrix
* Move keypad toggle and disable MAC led indicator
* Remove unnecessary check for RGB matrix
QMK Bot
Ramon Imbao
obosob
kb-elmo
18438880
James Larkby-Lahet
James Young
sendmmsg
gtips
Suryan Isaac
Antoine R. Dumont
Jose Luis Adelantado Torres
Robert Verst
T.Shinohara
Jay Greco
Mike Tsao
Tyler Thrailkill
Xelus22
Muhammad Rivaldi
4pplet
Drashna Jaelre
ploopyco
Nathan
fauxpark
Erovia
stanrc85
peepeetee
nopjmp
alittlepeace
Nick Abe
Jumail Mundekkat
Mats Nilsson
moyi4681
rate
Kyle McCreery
jurassic73
Nick Brassel
talsu
TerryMathews
melonbred
Albert Y
Philip (Han) Suh
Leon Anavi
Aeonstrife
R
AlisGraveNil
John Graham
Fidel Coria
Andy Freeland
James
Brandon Claveria
Dustin Bosveld
Gigahawk
Joakim Tufvegren
jackytrabbit
Carlos Martins
Joel Challis
Matthew Dias
bbrfkr
HalfHeuslerAlloy
Miguel Filipe
Nathan_Blais
Joel Elkins
Jeff Apczynski
Gregorio
Lander
Brandon Lewis
lukeski14
Sergey Vlasov
CodeFreak
DaneEvans
Christian Sandven
nopunin10did
Evelien-Lillian Dekkers
thompson-ele
rainkeebs
Maddie O'Brien
Sean Browning
Stefano Pace
Jonavin
Eithan Shavit
C1intMason
Gun Pinyo
Wilba
Love Lagerkvist
David Fryer
Flexerm
yiancar
Danny
spooknik
Jay
Sendy Aditya Suryana
Dmitry Mikhirev
Peter Park
ridingqwerty
Oliver Ocean
Caleb Lightfoot
Brandon Lee
wxyangf
Callum Hart
Quentin
Sife-ops
Ross Montsinger
chalex
Sleepdealer
Ciutadellla
Nico
Felix Jen
William Lam
rookiebwoy
Cosmin
Faehriss
duoshock
csc027
studiokestra
KnoblesseOblige
Brandon
Nathaniel
cccywj
Ross Nelson
Ben
knaruo
wangyifu
Daveyr
Christian Eiden
Gvalch-ca
Boo
klausweiss
Maxime Coirault
Ian G Canino
Robin Liu
npspears
Jeremy Herve
Victor Pivert