Specifically, if you enable the shared endpoint for mouse reports (or keyboard, which force enables it for mouse), and you don't have mousekeys enabled, it does not properly enable shared mouse EP for pointing device (which uses mouse reports). This cause it to error out in compiling. This fixes up some of the logic to ensure that all use cases are supported, and consolidates some of the code.
* Add keyboard Q1
* Update keyboards/keychron/q1/readme.md
* Update keyboards/keychron/q1/rev_0100/rules.mk
* Update keyboards/keychron/q1/readme.md
* Change layer switch function to "default_layout_set"
* Update keyboards/keychron/q1/rev_0100/info.json
* Update keyboards/keychron/q1/q1.c
* Mask out the DIP switch to fix sleeping issue when switch is ON
* Added and changed readme.md
Added keyboards\q1\rev_0100\readme.md
Changed keyboards\q1\readme.md since different MCU may used in other version.
* update
* update keymap name
* update keymap for keychron/q1/rev_0102
* Update info.json
* adding uf2 flash support for blackpill 401
* forgot to add blackpill to keyboard header file
* making changes requested by drashna
* fixing tzarc s comments
* removing the keyboard
* undo the change to dactyl_manuform.h
This patch corrects 2 issues with the LED matrix of the KDBFans KBD67 Lite (v3)
* Incorrect mapping of the right-shift, down-arrow, and right-arrow. (i.e. `NO_LED` positions of the `g_led_config` key matrix in the .c file do not match the `LAYOUT_65_ansi_blocker` matrix in the .h file.
* Remapping of the *LED Index to Physical Position* using physical measurements from actual keyboard and accounting for the southpaw LED position to define the true centre of the keyboard (more relevant to circular animations).
* Make solo half of split keyboards (more) usable.
Using only one half of a split keyboard (that's using the split_common
framework to communicate) is not a great experience, since several read
timeouts per scan cycle cause an unusably slow scan rate.
This change blocks all split communication attempts for 500 ms
(configurable) after an error occurs, causing the scan rate to become at
least _more_ usable, but might need some tweaking to work fully on most
keyboards. One read timeout still needs to occur after the 500 ms has
passed, and if that timeout isn't low enough, some scan cycles may still
be too slow.
* Fix lint complaint.
* Require 25 consecutive comm errors to see comms as disconnected.
The number of max errors can be overridden by defining
`SPLIT_MAX_CONNECTION_ERRORS`.
* Add comments to new defines, and ability to disable disconnection check.
Also increase `SPLIT_MAX_CONNECTION_ERRORS` to 40, since it's divisible
by most relevant numbers for the description.
* Make lint happy ...again
* Only update `connection_check_timer` when needed.
* Add new defines to split keyboard documentation.
* Move connection timeout logic to transport.c, add `is_transport_connected`.
* Use split_common disconnection logic in matrix.c.
Instead of doing more or less the same thing twice.
* Move disconnection logic to `transport_master`.
Is a cleaner implementation, and causes the scan rate while disconnected
to increase instead of decrease.
* Lint fixes.
* Lower default `SERIAL_USART_TIMEOUT` to 20 ms.
The read timeout must be low enough to not cause exessively long scan
cycles when using a solo split half. 10 ms was determined from testing
to work fine even with the slowest defined baudrate of 19200 (5 ms was
too low for that case), so 20 ms should be fine for most cases.
* Remove `SERIAL_USART_TIMEOUT` from ergodox_infinity/config.h
Was somewhat mistakenly included in an earlier PR.
* Fix building with `USE_I2C`.
* Reduce built firmware size.
Not really sure why this works, the idea was taken from tzarc's work on
split disconnection.
* Tweak and improve opt-out for split disconnection logic.
There are now two ways to opt out from this feature:
* Set `SPLIT_MAX_CONNECTION_ERRORS` to 0. This will completely disable
the connection status checks (also affects the slave matrix reset logic in
matrix.c, though).
* Set `SPLIT_CONNECTION_CHECK_TIMEOUT` to 0. This will only disable the
communication throttling while disconnected. Will make the firmware
smaller.
* Make split disconnection logic work with custom transports.
Includes a fallback implementation for keyboards using a custom
split_util.c but not a custom matrix.c (currently no such keyboard seems
to be merged, though).
* Remove unnecessary include of timer.h
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Joel Challis <git@zvecr.com>
* Fill the oleds with right mods
* Enable double mods on x32 oleds
* Disable forced NKRO
* Make oleds fancy only on good MCUs
* Overhaul oled display
* Further enhance oled, with kitty!
* Final oled form
* Not working transport
* Transport id of woring
* Add acceleration
* fix button placement for accel macro
* Fix accelartion location and behavior
* Remove OLED sync code
* Fix alignment issue
* Remove audio hack
* Fix up zima keymap
* Add matrix slave scan function and cleanup drashna.h
* Clean up user space
* Allow userspace sync to be disable-able
* Fix weird issue with audio
* Fix alignment issue with user split sync
* Disable second rgb matrix task
* Disable additional animations
* Change dynamic keymap settings
* Hacky fix for borked corne
* Add Blackpill (F411) support to tractyl manuform
* remove manual via eeprom reset
* Remove all references to rgblight twinkle
* Fix issues with config processing
Yoichiro Tanaka
Joel Challis
Drashna Jael're
Takeshi ISHII
GG
Xelus22
Christian Sandven
kb-elmo
Albert Y
stickandgum
Rifaa Subekti
lalalademaxiya1
Donald Kjer
QMK Bot
Olli Helenius
Path Nirvana
Nick Brassel
Vino Rodrigues
Dasky
Bror Winther
Ryan
npspears
precondition
Conor Burns
peepeetee
Joakim Tufvegren