* Make parameters from info.json available to the build system
* move all clueboard settings to info.json
* code formatting
* make flake8 happy
* make flake8 happy
* make qmk lint happy
* Add support for specifying led indicators in json
* move led indicators to the clueboard info.json
* Apply suggestions from code review
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* add missing docstring
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
* Basic qmk lint command
* check for keymap readme
* change the workflow from qmk info to qmk lint
* add a strict mode
* parsing -> parse
* document qmk lint
* small info logging cleanup
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* honor --strict in more places
* change the job name to lint
Co-authored-by: Ryan <fauxpark@gmail.com>
* `qmk info`: Add `--ascii` flag
* Fix typo
* Force ASCII for Windows/MSYS2
* Make it gooder
* Remove redundant windows check
* ...And this too
* Make pytest work on Windows
* add new qmk generate-api command, to generate a complete set of API data.
* Generate api data and push it to the keyboard repo
* fix typo
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* fixup api workflow
* remove file-changes-action
* use a more mainstream github action
* fix yaml error
* Apply suggestions from code review
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* more uniform date handling
* make flake8 happy
* Update lib/python/qmk/decorators.py
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
* Improve ANSI support and --no-color
* tweak when levelname gets stripped of ansi
* sync with latest milc
* make questions work with both milc versions
* pyformat
* Basic keymap parsing finally works
* Add 'keymap.json' creation to the qmk.keymap module
* Add tests and fix formatting
* Fix/exclude flake8 errors
* Convert keymap.c to valid keymap.json
* Fix some errors
* Add tests
* Finalize keymap.json creation, add json template
* Add docs
* Move pygments to the standard requirements
* Add support for nameless layers, fix tests
* Fix things after rebase
* Add missing 'keymap' value.
* Fix missing layer numbers from advanced keycodes
Buckwich noticed that if the advanced keycode / layer toggling key
contains a number, it goes missing.
Now we properly handle them.
Thx for noticing!
* Apply suggestions from code review
* fixup tests
Co-authored-by: Zach White <skullydazed@drpepper.org>
Co-authored-by: skullY <skullydazed@gmail.com>
* Improve LAYOUT macro searching
* Apply suggestions from code review
Co-authored-by: Zach White <skullydazed@users.noreply.github.com>
* Adjust signature
* Try to copy the makefile's handling of DEFAULT_FOLDER
* Move it further up, into `info_json()`
* Move it even further up so that keyboard_folder is correct
* Update lib/python/qmk/info.py
Co-authored-by: Zach White <skullydazed@drpepper.org>
* Update lib/python/qmk/info.py
Co-authored-by: Zach White <skullydazed@drpepper.org>
Co-authored-by: Zach White <skullydazed@users.noreply.github.com>
Co-authored-by: Zach White <skullydazed@drpepper.org>
* Consolidate udev rules into a single file
* Update rules in doctor.py
* Simplify doctor rule checking
* Fix errors
* Add TMK "FEED" VID to list of deprecated udev rules
* A comma would be nice
* Split rules back up into bootloaders
* Link to docs page in "missing" case
* Add Pololu VID
* Be more specific about Caterina devices, and add LilyPad PID
* Add `st-flash` flash target
Add support for flashing the firmware via the `st-flash` utility from
the STLink Tools package (https://github.com/stlink-org/stlink).
* Add `st-flash` to the `qmk flash -b` output
* Initial work for consolidation of board files and default ChibiOS configs.
* Migrate F401/F411 black pills for testing.
* Add early init bootloader jump flag.
* Add support for I2C in order to use i2c_scanner keymap.
* Add F401/F411 HSE bypass to get things booting.
* Exempt "hooked" ChibiOS conf files from updater script.
* Fix up ordering for bootloader_defs file check.
* Match previous $(KEYBOARD_PATHS) value for Proton-C, updated for all board configs.
* [kle2jinfo] use min/max instead of if
This is a slight change.
Before, the key_skel would keep the invalid value for future keys.
I think this is what was actually intended.
* [kle2info] calculate x
x is the current_x * key_size + (key_size/2)
y is the current_y * key_size + (key_size/2)
no reason to track both
The list of hidden subcommands were approved by @skullydazed ;)
Currently hidden if 'user.developer' is not True:
- cformat
- docs
- kle2json
- pyformat
- pytest
* CLI: More MSYS2 fixes
Now I can fully setup and work with qmk_firmware on an MSYS2
installation without any errors or exceptions.
* Apply suggestions from code review
Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>
* Some improvements
* Remove unnecessary import
* Remove slow, unused code
Getting the version from GIT was slow on both Windows and Docker.
Until we find a better, faster way, this is removed.
* remove unused imports
* Implement @vomindoraan's suggestions
* refine how we pick the shell to use
* Apply @fauxpark's suggestions
fauxpark investigated the topic of shells in MSYS2 a bit and we come to the conclusion that the safest bet was to just use the user's shell.
Anything more just opens up more edge-cases than it solves.
Co-Authored-By: Ryan <fauxpark@gmail.com>
* Use `platform_id` in doctor
This will bring it in line with the new code.
Co-authored-by: skullydazed <skullydazed@users.noreply.github.com>
Co-authored-by: skullY <skullydazed@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Use pathlib everywhere we can
* Improvements based on @erovia's feedback
* rework qmk compile and qmk flash to use pathlib
* style
* Remove the subcommand_name argument from find_keyboard_keymap()
* add experimental decorators
* Create decorators for finding keyboard and keymap based on current directory.
Decorators were inspired by @Erovia's brilliant work on the proof of concept.
* Use pathlib everywhere we can
* Update lib/python/qmk/path.py
Co-Authored-By: Erovia <Erovia@users.noreply.github.com>
* Update lib/python/qmk/path.py
Co-Authored-By: Erovia <Erovia@users.noreply.github.com>
* Improvements based on @erovia's feedback
* rework qmk compile and qmk flash to use pathlib
* style
* Remove the subcommand_name argument from find_keyboard_keymap()
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
Clean up checks and logics that are unnecessary due to MILC updates.
Use pathlib instead of os.path for readability.
Use the 'pytest' keyboard for the tests.
Add community layout for 'handwired/onekey/pytest' so we can test
community layouts.
Instead of using regexes and globbing to find the rules.mk and keymap.c
files, walk the directory tree to find them.
Also, do away with the concept of revision.
Zach White
Joel Challis
QMK Bot
LongerHV
Ryan
Erovia
James Young
Sergey Vlasov
Nick Brassel
Zach White
codecoffeecode
Keenan Brock
Pete Johanson
Ross Baquir
Mikkel Jeppesen
Akaash Suresh