* Updated information on info.json and hopefully de-cluttered branch
* Updated default encoder settings
* Updated info.json for after to be in the proper order
* Fixed maintainer name
* added Keyboard Southpaw66
* Housekeeping, shorten urls
* Housekeeping
* Row matrix pins were flipped, fixed
* housekeeping, extraneous punctuation
* bug-fixing
* bug-fixing
* Layout macro fixed
* Layout macro fixed again
* Update and rename Southpaw66,c to southpaw66.c
* Rename Southpaw66.h to southpaw66.h
* Update config.h
* Update info.json
* Change Southpaw66 to southpaw66
made change to case in all instances in code except where critical, such as in url's.
* Rename parent folder from Southpaw66 to southpaw66
* Rename parent folder from Southpaw66 to southpaw66
* Update info.json
* Update keyboards/rpiguy9907/Southpaw66/readme.md
updated image url to point to lower resolution image.
* Update config.h
re-capitalized Southpaw66 in product name.
* Rename Southpaw66 parent folder to southpaw66
* Rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* Rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* rename parent folder from Southpaw66 to southpaw66
* Update keyboards/rpiguy9907/southpaw66/readme.md
* Update keyboards/rpiguy9907/southpaw66/config.h
By default the `i2c_master` driver for ChibiOS uses the B6 pin for
`I2C1_SCL` and the B7 pin for `I2C1_SDA`. However, the ChibiOS board
file used for the F401 Blackpill board (`ST_STM32F401C_DISCOVERY`)
configures B6 as `I2C1_SCL` and B9 as `I2C1_SDA`, and if that
configuration is left unchanged, enabling the `i2c_master` driver
results in having two pins (B7 and B9) configured as `I2C1_SDA` at the
same time, which does not work properly (experimental results show that
the B9 pin still works as `I2C1_SDA` in that case, and the B7 pin does
not work).
Configure the B9 pin as an input with pull-up in `board_init()`, so that
the B7 pin can be configured as `I2C1_SDA` by the I2C driver.
* Add new keyboard Pan
Encoder switches still need work
* New keyboard Pan
Should be complete
* Split MCU selection into 2 revision folders
* [rgbkb/pan] Make requested changes for PR
Additionally, set DEFAULT_FOLDER to rev1, and default rev1
to atmega32a (as all shipped kits include an atmega32a)
* Apply suggestions from code review
* Fix default keymap typo
* add usb max power define
* Commit suggested changes
* Update keyboards/rgbkb/pan/config.h
* Apply suggestions from code review
Small copyright updates
* Apply suggestions from code review
* Personal keymap
- fix quoting in description
fix issue with userspace disabling audio
wip
Update keyboards/kingly_keys/little_foot/keymaps/yanfali/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/kingly_keys/little_foot/config.h
Co-authored-by: Nick Brassel <nick@tzarc.org>
Co-authored-by: Yan-Fa Li <yanfa.li@fireeye.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Nick Brassel <nick@tzarc.org>
* Update massdrop/alt keyboard to fix Caps Lock LED flickering.
* Fix Caps-lock LED during underglow-only for massdrop/ctrl
* Update keyboards/massdrop/ctrl/keymaps/default/keymap.c
* feat: new keymapping for idobo
* fix: added licenses. converted int to uint8_t where applicable
* fix: addressed zvecr stylistic enhancements
* fix: replaced rgblight_sethsv with rgblight_sethsv_noeeprom
* First pass
* Add config options to docs
* Update some wording
* Slight tidy up of backlight caps logic
* Init pin to correct state
* Move init location
* Reverse default state
Specifically, the lgreen variable isn't used, and avr-gcc 8.x complains about this. To prevent it from being an issue, just set all of these led variables to be unused.
* add big spacebar default
* add rev1 big space
* add big spacebar default
* add rev1 big space
* Fixed copyright statements
Removed unused RGBRST keycode and bootmagic swaps
* Minor Tweak
* Refactor spacebar defines.
* Add TMO50 layout
* Rename Atreus keymap.
* Refactor Atreus for readability.
* Eliminate tapdance quote and tweak maltroff.
* Factor out tapdance.
* Add some fancy combos and keys.
* Remove combos for now because they cause pain.
* WIP visualizer
* Alternate method for reset
* WIP2 visualizer
* Layer text tweak.
* Add made-up layout Nortron as a combination of Norman and Maltron.
* Add backspace.
* Add Talljoe keymap to Prime E.
* Fix double-colon so it doesn't press enter if shift is released early.
* Use new make command.
* Bring some modern standards into code and add licenses.
* Remove QMK_KEYBOARD_CONFIG_H and fixup QMK_KEYBOARD_H.
* Move from `biton32` to `get_highest_layer`.
* Remove PREVENT_STUCK_MODIFIERS
* Update keyboards/thevankeyboards/minivan/keymaps/talljoe-minivan/config.h
Add Eco keymap, factor Crkbd keymap to community layout, other minor tweaks
* Remove outdated Crkbd Ctrl key positioning info
* Add Left Alt key to Lily58 keymap
* Lily58 no longer overrides default TAPPING_TERM
* Refactor Crkbd keymap to use new community layout
* Fix underglow animations for Crkbd w/ Split Common
* Add initial Eco keymap
* Update outdated reference to Crkbd layout
* Add keymap links to userspace readme
* Add copyright notices to files changed in this PR
* add dp60 indicator mode
* update according to #7720
* added license header and move the ws2812 codes to a seperate c file
* fixed conflict with master
* nullbitsco/nibble: rework LAYOUT_all
... and update via keymap accordingly.
* compress info.json LAYOUT_all tree
Only changes the white space.
* rebuild info.json LAYOUT_all tree
Note: this commit makes the visual layout the ANSI layout with a split left Shift, instead of being the same as the ISO layout.
* unify code styles
Make logically-unchanged code blocks similar in appearance to logically-changed blocks.
* correct LAYOUT_iso key sequence
Move ISO Enter's object to its proper place.
* exent VIA support
* minor cleanups
* Update keyboards/exent/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/exent/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added ad/freebird60.
* Moved freebird60 keyboard. Added VIA keymap.
* Updated `keebsforall/freebird60` README to include image.
* Update keyboards/keebsforall/freebird60/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/keebsforall/freebird60/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Adding Evan Travers' Keyboardio Atreus branch.
Initial commit of my KeyboardIO Atreus layout.
This is a direct copy of my default Atreus layout, with blank spaces
for the two additional keys.
* Added MACLOCK macro to keymap.c
* Updates to Keyboardio Atreus keymap and readme.
* Adding arrows to bottom row of RAISE and LOWER layers
* bringing the rest of the master branch to my working branch.
* Changes to my KeyboardIO Atreus keymap & readme
* Changes to keymap.
* Adding Evan Travers' Keyboardio Atreus branch.
Initial commit of my KeyboardIO Atreus layout.
This is a direct copy of my default Atreus layout, with blank spaces
for the two additional keys.
* Added MACLOCK macro to keymap.c
* Updates to Keyboardio Atreus keymap and readme.
* Adding arrows to bottom row of RAISE and LOWER layers
* bringing the rest of the master branch to my working branch.
* Changes to my KeyboardIO Atreus keymap & readme
* Changes to keymap.
* Added GPL2+ compatible license header.
Co-authored-by: Ian Sterling <503326@MC02YT9K9LVCF.tld>
* Firmware initial commit, still has a few bugs - mainly rotary encoders do not work and needs cleaning up
* Fixed the volume control issue and limited the RGB brightness (can be really bright), added the ability to switch LED mode with left encoder click, and added via support (untested)
* Remove define that should go in config.h
* Removed define that should be in config.h
* Removed LTO_ENABLE as suggested - has issues on ARM
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Added the correct define for OLED screen size
* Applied suggested change to remove description
Co-authored-by: Ryan <fauxpark@gmail.com>
* Made suggested change to remove backslashes
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to remove backslashes
Co-authored-by: Ryan <fauxpark@gmail.com>
* Suggested change made to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/rocketboard_16/rocketboard_16.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added suggested comments
Co-authored-by: Ryan <fauxpark@gmail.com>
* Made suggested changes to rules file
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added suggested change to rgblight
Co-authored-by: Ryan <fauxpark@gmail.com>
* Added info.json for QMK configurator
* Update readme.md
* This change makes the firmware work... through magic... seriously, no idea - but it works!
* Updated dimming step, OLED functionality, and rules for formatting
- Changed the dimming step size for smoother dimming with the reduced range
- Added lots of OLED functionality - QMK logo and title at top, num/caps/scroll lock status, and backlight brightness level
- Updated the rules.mk file to comply more closely with the formatting guidelines
* Fixed tab issues
Co-authored-by: Ryan <fauxpark@gmail.com>
* Updated to use bootmagic lite with the key that usually turns rgb on/off
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra which is a Hotsawp RGB 65% keyboard
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update readme.md
* Update info.json
update the name of layout to consistent the keyboard.
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add Z70Ultra
* Support Z70Ultra
[Modified] info.json to support two different layouts
[Add] rules.mk to support default folder
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/z70ultra/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* remove excessive arguments from LAYOUT_split_space
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/info.json
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/z70ultra.h
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/rev1/rules.mk
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/default/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Update keyboards/melgeek/z70ultra/keymaps/via/keymap.c
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
* Use macro replace with the literal for CS & SW
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] Support MJ61 which is a 60% ANSI STD Hotswap RGB keyboard
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Keyboard] MJ61 Add license header for files and the link for readme
* Update keyboards/melgeek/mj61/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/config.h
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/rev1/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/melgeek/mj61/mj61.c
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add GPL for files
* Update keymaps/default/keymap.c
* Update keymaps/via/keymap.c
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/melgeek/z70ultra/z70ultra.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* [Fixed] remove this code cause it's useless.
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Naoki Katahira
Philip (Han) Suh
Josh Hinnebusch
Lukas Alexandre
gooberpsycho
Sergey Vlasov
KemoNine
Legonut
Ole Westendorff
yfuku
chent7
rupa
Garret G
Nate Stein
Yan-Fa Li
Chris Merrill
Jordan Egstad
yiancar
Joel Challis
kb-elmo
Drashna Jaelre
TJ
Joe Wasson
Jonathan Rascher
yulei
kaylanm
Brandon Schlack
Endemoniada
katawajojo
Ryan
Reibl János Dániel
ai03
Frothy
Rich Saunders
Xelus22
James Young
MechMerlin
KnoblesseOblige
Brandon Claveria
Keys of Kings
Xyverz
Seth
MelGeek
nopunin10did